Dude i love that made in taiwan sticker and the health and safety sticker you should defiently keep those on, really adds to the authenticity of the gun and doesnt make you look like a noob
@jorgeespinoza2548
Жыл бұрын
I just recently got an mp7 navy gen 2 its such a fun gun to shoot the only issues ive had is full auto can be a bit laggy as the stock lube is not the best but cleaning it out and relubbing fixes this issue. the paint on the rails seems to easily scratch off too but that might just be a me thing. other than these cons i dont regret buying it and have had no performance issues. I cant talk much about the accuracy as i cqb so its pretty accurate close range. another con is the mags as they are pretty pricey here in California. if possible i would love to see a full disassembly video of the mp7 as there arent much out there.
@Sylcatam
Жыл бұрын
Maybe do a comparison to another certain SMG you recently received? Since I think a lot of people wanting a gbb SMG will probably be thinking about this one, the TM one or the VMP1.
@MiddleAgeGameruk
Жыл бұрын
Good idea 💡 😉
@shovelchop81bikeralex52
Жыл бұрын
Had trouble with my 1st gen gbbr vfc mp7 for ages until I bought some replacement parts and discovered the factory had put the nozzle in backwards! LOL. Much better now, it's a pain in the neck to work on though.
@MiddleAgeGameruk
Жыл бұрын
I'm glad there is a huge upgrade internally between the gen1 and gen2 mp7. So far, I'm enjoying it, and having the tm version as well, there are some surprising differences
@w01f777
Жыл бұрын
As someone who’s owned both.. The TM is more gas efficient, consistent and accurate out of the box. It likes full auto more than the VFC. However… the internals are a nightmare. They are prone to cracking the chassis at the pin holes, the bolt lock wears and they suffer from sleepy trigger after a lot of use. The gen 2 VFC is full size, a nicer finish and a harder, sharper kick. Range is better as it lifts heavier BB’s. I found it hops .40’s happily OOTB. It’s not quite as accurate, but more than good enough. It’s not quite as efficient, but good enough on semi. Full auto isn’t the best, but it’s a CQB gun, so you’ll probably never put it in auto anyway. They only really break on the rear plates on high power gas in hot weather, but you can get the replacements from VFC for about a tenner or upgraded aluminium ones from others. As a diehard tm mws and pistol fanatic, I would still say the gen 2 VFC is the better choice
@MiddleAgeGameruk
Жыл бұрын
Thanks for the information 👍 I will definitely be looking into the rear stock latch from Crusader. I will also be doing a full comparison video with the TM mp7 once the review is out, as I want to give the vfc mp7 a proper review. 😀
@rdeer2549
Жыл бұрын
What’s the issue on the VFC with full auto? I’m trying to buy one
@w01f777
Жыл бұрын
@@rdeer2549 nothing is wrong with it. It’s just not as happy to do it as the TM. It’s a heavier/larger bolt, with a longer travel than the TM so it will always be slower by nature
@rdeer2549
Жыл бұрын
@@w01f777 thanks for the reply. Stay safe out there!
@adampetlus4892
Жыл бұрын
Looking forward to the MP7 comparison video. I want to buy one but I can't decide between VFC and TM. I'm leaning more towards TM but I'm afraid of the fragile internals. Could you please recommend which one to get?
@keilet
Жыл бұрын
Depending on where you are the TM is going to be capped at 1J due to Japanese regulations. If you plan to compete on fields that don't require such low restrictions, you'll be spending more money to replace the restricting nozzle and likely have a hard time finding it.
@aimkulkun
Жыл бұрын
I really waiting for comparison video between VFC and TM , I got the TM one so I really wanna know the different between those two. Btw loving all of video so much also your TM AKX video make an easy decision to bought that gun and I'm glad I did it😁
@earthsteward76
2 ай бұрын
Thanks for the excellent reviews! Do you get any feeding issues with yours? My bolt works perfectly, but as soon as a mag is loaded the bolt stops short and the gun jams. It seems to be an issue with BBs not being pushed up and into the hop rubber. The gun's brand new and it happens on four different mags so I don't think it's an issue with the mags. I got mine from Bespoke as well. Much appreciated!
@MiddleAgeGameruk
2 ай бұрын
Hi there, sorry to hear you're having trouble with your mp7. Two things to try first before contacting bispoke would be to just insert a few bbs to see if it's an overloaded mag issue. The second is to pull back on the bolt and see if the nozzle catches or rubs on the mag excessively. If so, then it's an alignment issue. A third and actually most likely is that the grub screw restrictor in the nozzle may not be screwed in enough. If you can see the silver screw at all showing at the bottom of the nozzle, then just ever so slightly tighten it with an hex key.
@MiddleAgeGameruk
2 ай бұрын
The grub screw should be approximately 1 mm inside the nozzle from the lower lip of the nozzle, and looking up from under the bolt, you should not see it.
@earthsteward76
2 ай бұрын
Thanks very much, greatly appreciated 👍 The mag only had 15 BBs in it, just for a test, so I don't think it's that. Having stripped it down though, it could be the grub screw because it was protruding at the top and bottom, and was barely screwed in. Not sure what to do if it's the alignment as well, because it does look like it catches slightly, but will play about with it and see what we can do. Thanks again! 👍
@MiddleAgeGameruk
2 ай бұрын
No problem, the nossle geometry is so important to good feeding. If it is visible, then screwing it in is an easy fix. Just make sure not to go too far as it will fall inside and be a nightmare to get out.
@earthsteward76
2 ай бұрын
Thanks very much mate! All done, and it's working fine. Very grateful, thank you 🙏
@mellymoo_eats
Жыл бұрын
I was thinking of getting this but it was too hot for the UK, so I got the TM instead
@MiddleAgeGameruk
Жыл бұрын
Hi there, stay tuned for the review as I think you will be surprised 😲 by it.
@archer8389
Жыл бұрын
Too hot? I’m pretty sure the fps is really low
@madsopi6426
Жыл бұрын
Did they use a mp5k box? Looks like a mp5k molde in the box😅
@pyroromancer
Жыл бұрын
looks like they decided to compromise
@MiddleAgeGameruk
Жыл бұрын
Hi there, it certainly does look like it was a dual-purpose box, 🤣
@jackstally7861
Жыл бұрын
Where did you get the vfc mp7 from?
@MiddleAgeGameruk
Жыл бұрын
Hi there, I got mine from bespoke airsoft uk.
@jackstally7861
Жыл бұрын
@@MiddleAgeGameruk cheers been looking at Umarex mp7 for a while. Do have the TM mp7 GBB
@MiddleAgeGameruk
Жыл бұрын
Hi there, yes, I do have the Tokyo Marui mp7, and I am in the process of making a comparison video. That video should follow the review video.
@Holanduzo
Жыл бұрын
I hate calling them Umarex instead of VFC, they just provide licensing
@stephanlamersdorf4565
Жыл бұрын
Here in Germany they also fullfill repairs. They are realy nice to work with. I phoned them about some spare parts and they were super helpful.
@sagaliv8864
Жыл бұрын
@@stephanlamersdorf4565Thats great to hear. So, is it possible to order parts from them in Germany...?
@bigblackman404
5 ай бұрын
fucking hell mate does it really take 2 minutes to just take the packaging off🤣
@earthsteward76
2 ай бұрын
Yes it does 😂 I bought mine from the same place, and it was wrapped like Tutankhamun!
Пікірлер: 35