It’s almost like the bike barks when you pop it up, great sounding bike and sweet wheelies!
@03JP17
Жыл бұрын
Nice job man
@kalemtravers9425
8 ай бұрын
Hey my brother looks amazing have you had any issues with oil starvation ive seen one or two blow from constant wheelies
@brandonbeznoska
Жыл бұрын
Whats your settings for the power wheelies?
@cekipa8089
6 ай бұрын
You changed any gearing?
@tkurban
Жыл бұрын
btw, set the engine breaking to level 3, it will make the bike pop when u decelerating.
@wiickedwill
Жыл бұрын
Definitely gonna have to give that a try
@MiamiJato
Жыл бұрын
Nice wheelies, what gear is that mostly?...........
@wiickedwill
Жыл бұрын
2nd gear
@vijayrdx7434
Жыл бұрын
Mate I got a 22 r1, can you plz show me your settings in your bike for clutch wheelies. For me the bike is very aggressive for popping wheelies becos of jerky throttle.
@wiickedwill
Жыл бұрын
Mode A is a bit too aggressive on the throttle, I wheelie in power mode C with SCS & TCS off. If you wheelie with SCS on and you hit balance point the bike will cut power causing you to slam your front end, ended up happening to me (very sketchy)
@pwnzormcduck6546
Жыл бұрын
Performance black, my favorite of this year. How much did you pay for it out the door if you dont mind me asking? After tax, titles, and fees.
@annettecheek2910
Жыл бұрын
It’s gon be a little over 20 gs out the door
@pwnzormcduck6546
Жыл бұрын
@@annettecheek2910 you was close. Got my 2023 black for 19.2 with a 2 year Yamaha extended warranty.
@CodyB-R1
Жыл бұрын
Hey bro on our year model r1s I learned if you do a burnout it will turn it off
@wiickedwill
Жыл бұрын
I just pulled the ABS Motor Fuse, don’t really wanna waste a good tire
@bigesrac
8 ай бұрын
Do you have “LIF” control completely off as well?
@JGleckk
26 күн бұрын
If he didnt, you would be able to hear it kicking in as soon as he clutches up
@Scythe_Voltage
Жыл бұрын
Why do the new bikes have so many engine light problems, I wanna get SC exhaust but don’t wanna mess anything up
@wiickedwill
Жыл бұрын
Just make sure you install the servo buddy before you install your new exhaust. I ended up installing my servo buddy after I installed my exhaust and the check engine light wouldn’t go away, eventually I did go away after 1-2 days. Weird.
@libingmeme8474
11 ай бұрын
just get it flashed afterwards
@dillonskinner5496
27 күн бұрын
Superbike unlimited flashed my R1m and it was only $230 went up 25 hp to definitely worth it
@FlexFast
Жыл бұрын
A 1 second burnout should disable abs on your bike my guy 💪
@wiickedwill
Жыл бұрын
I just ended up pulling the fuse, didn’t feel like wasting my tire
@FlexFast
Жыл бұрын
@@wiickedwill that's a good idea. I'm gonna probably do the same thing. What yrc settings do you feel best @doing wheelies. My bikes bauce tuned. Not sure if pwr1 is to much power or not
@wiickedwill
Жыл бұрын
@@FlexFast I wheelie in power 3. Power 1 is too twitchy
@181everything3
Жыл бұрын
Cant you just turn the trac control , go over the trac and hold up for 3 seconds itll turn it off and leave abs working , abs doesnt stop from a burnout thats the trac control
@wiickedwill
Жыл бұрын
Not that I couldn’t wheelie with ABS, just that I didn’t want to. ABS prevents your front/rear from locking up, meaning that if I go too far back in a wheelie and I slam on my rear brake to save myself from looping, ABS may reduce braking pressure thinking I’m about to lock up the rear, leaving me without all the braking force that I need to prevent myself from looping my bike
@181everything3
Жыл бұрын
@WiickedWill makes sense now I was just confused
@leevlogs2706
Жыл бұрын
Don’t go down on the wheelies too hard the duct will snap
@wiickedwill
Жыл бұрын
What will snap?
@vijayrdx7434
Жыл бұрын
That's only for 15-19 models not for 2020+ models ha ha ha
@vijayrdx7434
Жыл бұрын
@WiickedWill he is talking about 15-19 models, the air duct will snap when you pop wheelies becos it's a plastic. Then later yamaha changed it to light weight Aluminium metal is what I heard. The air duct in 2020+ is very strong.
Пікірлер: 36