The 300's def lug more. But the YZ still lugs good. The fact that its compared always against the 300's says alot about this bike. Its simplicity is what I think is its best feature. I have heard the vibration difference mentioned from friends of mine. So there is an apparent difference there. As far as clutch pull if your used to cable clutch, this one in my opinion is a pretty easy pull due to the lighter springs. Not as effortless as hydraulic. But i dont think its that bad at all really. Short story, i dropped mine in a creek crossing. Completely submerged. Put front end in air let water spill out the tailpipe put new plug in. After about 10 min of kicking it atarted up and i rode it home like 40 min or so away. Not sure the other bikes could do that.
@josephfelice601
7 ай бұрын
I had a 2022 (with the GYTR heavy flywheel) and it was the best bike I ever owned... sold it because it just begged to be shredded, and I could not control myself to deny it, so my riding became increasingly more dangerous.. FYI: the 2006 is not the same as the 22-23. they redesigned the head, reeds and a few other elements in the engine and carb. It's not a factory level redo, but it was somewhat significant. I ran Amsoil and always 1/2 clutched the engine. Never had any issues with metal in the oil and the clutch stayed heathy for a long time. Also ran the long lever, never had that heavy clutch issue, but never tried a hydraulic one either.
@badgerbait8351
7 ай бұрын
On target with the suspension and air box access. Thought I'd try out a Beta 300 and now I miss my X. The one upgrade I would opt for on the Yamaha when I go back is the E start.
@faton86
11 ай бұрын
I used to own an older model of the YZ250, but now I've upgraded to the new model of the Yamaha WR450F. However, I must admit that I sometimes find myself missing my old bike. Even though it was originally designed for motocross and I mostly ride it for enduro purposes, it was an incredibly enjoyable bike to ride. It had a lightweight and nimble feel to it, along with impressive power and reliability.
@THMXCO
11 ай бұрын
Heck ya man! Are you happy with your purchase?
@RideWithTheWolf
11 ай бұрын
My 06 yz250 definitely feels different than my 22 yz250x. The 06 feels more rigid and taller. I have it set up for MX wit the 19" rear.
@adamcuttler9665
4 ай бұрын
He'll ya I love my 03 yz 250! And my 98 rm 125.
@adamcuttler9665
4 ай бұрын
My 03 yz 250 is great anywhere I ride it track and woods i have no problems or complaints. Well I could use the bigger gas tank.
@badger4233
7 ай бұрын
Waiting for stock to show up next month in Australia 🇦🇺 can't wait for 2024 yz250x. Thank you for helping me pick between the both.
@titushough3321
10 ай бұрын
I have a 06 yz 250 and I could never get my cable clutch to feel reasonable fatigue wise. I agree that it feels more responsive than the hydraulic clutches. The magura kit for our bikes is what I purchased. One of my favorite additions. Took some re learning but now I can go off the extension of my fingers rather than the "feel". Regardless the arm pump was so terrible before that my clutch became obsolete. +1 for hydraulic clutch lever
@chadrides914
5 ай бұрын
You didn’t have your cable clutches maintenced or setup correctly then. User error not a result of the cable clutch design.
@cameronbrown3027
6 ай бұрын
Thanks for the review. Something you can try with your clutch lever is bring your perch in so you pull out towards the end of your lever, which will give you more leverage and a easier pull
@SuperXs1100
7 ай бұрын
I own both 250x and a 23 300xc and took both bikes to wellsville Ohio and I prefer the yz250x over the the ktm. Even the clutch I prefer because the feel is more positive over the sometimes jerky hydraulic clutch. An RKtek head with a lectron carb made the yz noticeably stronger and smoother throughout the rev range. The only thing I prefer on the KTM is the 6 speed semiclose trans. The WR trans in the yz250x makes for a big jump from 3rd to 4th which can be somewhat fixed by putting the yz mx 3rd gear in it.
@enduroriding300
6 ай бұрын
Is that the irc vx30 front, If so how do you like it? I like mx33 and mx34 wondering if I should switch for more affordable and hoping better in wet rock and root, logs. Regarding clutch, buddy at a race had a cable pull reducer by moose goes inline with the clutch cable was lighter than my te300i clutch pull on his rm250.
@grudgetank3127
10 ай бұрын
slide the cutch lever in a bit.. so you're grabbing the end of lever.. swap the kill switch location with it. it worked for me
@user-xj5xp6qz5g
4 ай бұрын
I had a 2007 KX250 and a 2018 YZ250 two strokes and I ride at my local motocross track and the best thing I ever did to them was add a 12oz flywheel weight. So many people think they sap power but they dont.. power doesnt just disappear into thin air. They took the edge off the violent natures of the bikes and smoothened them out a little. I got more traction and the bike was less likely to get squirrely on me when I grabbed too much throttle. Its my opinion that most weekend warrior types would benefit from them.
@evanstreets8830
11 ай бұрын
Hey mate what sort of hours are you getting out of the x model before top and bottom rebuilds
@smokey6859
11 ай бұрын
I can tell you for sure The Magura hydraulic clutch makes a noticeable difference. I would never have a YZ250x without one
@Pajero.m57
8 ай бұрын
Could you give the ref of the magura you have? Thank you
@Sanguine_Addiction
10 ай бұрын
I have a 2017 YZ250X with a SmartCarb, Scott's stabilizer and Stealthy flywheel weight. STUPID amounts of fun to ride BRAAAAAAAAP 🤘
@thanepetroff4414
11 ай бұрын
So nice to hear somebody truly praising a great bike rather than dogging on it and putting it down saying oh it's an outdated dinosaur they need to change it they could put a hydraulic clutch on it and electric start would be nice but then it would cost a lot more money it's a hell of a good price for a hell of a good bike They could change the leverage ratio on the clutch to make it an easier pull for sure though I have troubles with that myself especially with carpal tunnel Anyway thanks for making a great video I appreciate it enjoyed watching it
@RideWithTheWolf
11 ай бұрын
I wouldn't mind electric start, but I've seen KTMs on the starting line not starting the first button push :D
@user-kz5th5bn3m
8 ай бұрын
used to have a 2001 yz250 and that thing was actually great in the woods suprizingly. just recently bought a 17 gasgas ec300 and they arent even comparable. evrrything is just different but not that much better. the hydraulic clutch is definitly the best things about the gas gas. but honestly, id take that old yamaha any day if i have some wicked hill climb bc the power is just so raw.
@ottokirk2325
8 ай бұрын
All this needs is a STIC Super X carb or even the STIC insert metering block. I've got X2 on a stock old 200SX and it pulls new 250F's easily and I suddenly mix it up at the track with faster riders. To keep it in control, I run the slowest turn G2 throttle cam. On the tight trails it has unstoppable grunt and lofts the wheel in an instant.
@m97429
5 ай бұрын
Buy a Moose EZ3 Clutch Lever and Perch Assembly, 50% less pull. I use these on my older 83 and 87 Honda CR's, they really do work.
@elcincero321
8 ай бұрын
How long to refuel, especially with the smaller tank now?
@Saa45MIV
11 ай бұрын
I dunno man I’ve owned both now. My last bike was a 250x and I put 175 hours on it. I did every thing to that bike. Suspension, pipe, flywheel weight, head , jetting… you name it.I now have a ktm 250xc and I’d hate to say it but i think it’s better right out of the box … it runs smoother, its geared better, it has electric start, is fuel injected, has hydraulic clutch, better brakes, plusher suspension and is just all around easier bike to ride.
@bcuzicancuellar5478
6 ай бұрын
Great review. I grew up riding dirt bikes and started with a Yamaha mini enduro 60cc when I was 12. Learn how to quick shift because I couldn’t use clutch lever due to childhood accident. Was off a bike for 33 year and got back on one in 2013 with a 2012 NC 700X DCT. Since 5hen I’ve owned Yamaha FJR 1300 AE, Africa Twin 1000 DCT, VFR 1200X DCT, 2018 Goldenwing DCT, non tour, and VFR 1200F DCT. All great bikes. I love going fast, and I’ve gotten the bug to get me a dirt bike once again. I’m looking at a 2024 YZ 250X with Recluse auto clutch, but I’m only 5’6” short. Do you think I can handle this tall bike? Not looking to do anything quite crazy on it. Thanks and ride safe! Subscribed.
@JoyCoonAdventures
5 ай бұрын
I agree on the clutch pull like man it kills my fingers when i practice wheelies
@timturner4092
11 ай бұрын
I would go with the flo pro 160 clutch lever and purge assembly
@thanepetroff4414
Ай бұрын
I had a 2001 ktm 250sx the cluth pull was about 10% harder than all my other 250 two stroke race bikes with cable pull Love a cable clutch because i can actually feel the clutch. I lube the cable with a cable luber and WD-40 after every ride and also grease the pivot point of the lever. Maybe the hydraulic clutches are easier to pull now compared to the older bikes. Also you can get clutch lever assemblies with different leverage ratios. Replace your clutch cable every one to two years and lube it after every ride and you will like it a lot more.
@Rossi46Moore
11 ай бұрын
Fully agree with you about the SSS forks. The rest no thanks. The Sherco 250 is arguably what the Yamaha 250x should have evolved into.
@JS-lv5pn
11 ай бұрын
Ah I personally still like the Yamaha.
@danstevens2204
11 ай бұрын
17 yz250 love it. Don’t find cable clutch to be an issue. R6 and T7 are the same not something that I even think of
@daveanddanniejacobs9432
9 ай бұрын
Straight out of the box besides what you mentioned about the kick stand wr tranny the bike comes from the factory with woods style suspension setup and an 18 inch wheel on the rear.
@bradleysodee5221
11 ай бұрын
I have arc lever and perch on my yz and never had a issue. Being a shorter guy electric start is all I really want😂
@listenupfools731
7 ай бұрын
I had a 2016 250x,and it was AWESOME
@nseric1233
11 ай бұрын
Put a cheap stunt clutch lever for a street bike on it, they help more than the easy pull dirt bike levers. It makes the clutch pull 50% easier, I ran one on my 06 yz250, it worked great.
@THMXCO
11 ай бұрын
Dude that sounds awesome. Thanks!
@curtisstoddard9732
7 ай бұрын
I have a 2019 yz250x and my clutch pull is butter. Even guy's with ktms would try it and say wow that's easier than mine...
@14guitars67
7 ай бұрын
Clutch shmutz. What about the CRAZY suspension settings? TWO clicks IN on compression, ONE IN rebound? I'm running 8 OUT comp and 4 OUT rebound (shock and forks). 2006 SSS forks, 2007 shock.
@nostalgicbaainaar6384
7 ай бұрын
Robert Urmosi has a video that shows a hack to lighten the clutch pull. Its his YZ250X 25hrs review and tune tips video. Its a very simple way to help with the pull.
@chadmc4217
10 ай бұрын
A reckluse clutch is a must for off road
@mikeconnor2102
7 ай бұрын
LOVE my Sherco 250 SE factory....best enduro race bike made!!
@denniswilder3014
11 ай бұрын
Get a different clutch perch and lube the cable often.i forgot what i put on my 21 yz but i can use my middle finger on the clutch going thru my harescrambles course that is 3.3 miles long single track one lined with alot of tight tight corners.finger never gets tired and i eat clutch plates.
@THMXCO
11 ай бұрын
Sweet man! I appreciate that.
@dominocweber9763
11 ай бұрын
Sweet bike man. I have a 23 gas gas ec300 for my hard enduro bike. I also use it for desert hare scrambles but wish I had a yz250x for desert. The carb is better if tuned correctly and suspension is hands down better on the yz. Im rebuilding my wp about every 15hrs. On my 4th suspension rebuild.
@THMXCO
11 ай бұрын
Oh wow man! Why rebuild so often?
@dominocweber9763
11 ай бұрын
@@THMXCO the seals get blown out and leak bad. I think its partially due to bottoming out hard when riding whoops and sand while desert racing but i keep the suspension somewhat soft for hard enduro. I have not done valving just upped the spring rate set sag and played with clickers
@danfasching926
11 ай бұрын
Get the magura hydraulic clutch lever set-up! I put it on my yz250 and absolutely love it! It makes a huge difference, its a lil spendy but yes it is worth it for sure!
@OldBrokenBastards
4 ай бұрын
Agreed, I love my magura hydraulic clutch.
@mikeferrara2460
11 ай бұрын
I had a 2006 with the hydraulic conversion that worked great. However, a Rekluse will make your clutch pull a non issue.
@THMXCO
11 ай бұрын
Well I don't disagree, however I need fine clutch control. So auto clutch is a no go
@dankruger2890
11 ай бұрын
@@THMXCO there are many different versions of the Rekluse
@jaywalk6628
11 ай бұрын
I have had many yzs and a 17 250x and yes it lugs incredibly low, 3rd to 4th gear gap is a bit much for deep loam, Suspension can be valved to magic status, I prefer the pull of the cable clutch vs hydraulic, yz has a very short (hard pull) section where you use it to modulate the engine, ktm is hard pull all the way to half (where it slips). YZ is better trail mileage than tpi or TBI. Bew Husky te 250 is only $1,588 more in my area right now, Lights, e start, no engine vibration, resale. I still like a 250x, rode mine every weekend for five years but Yamaha does not care to make a true off road bike.
@quirinm.
9 ай бұрын
I don’t want a true offroad bike, that’s why i bought a imported YZ250X for the same as a Austrian 300 costs here in Germany. It has no added features you don’t need and it just is way more fun and pure dirt bike riding in my opinion, suspension is also better
@jaywalk6628
9 ай бұрын
@@quirinm. I prefer the yz250 over the X for trail riding though, you can always find the correct gear.
@petek6522
11 ай бұрын
I was looking for that bike exactly 1 year ago, nobody within 200 miles of me had it ... I ended up finding a 2023 ktm xcw300 in New Hampshire freedom cycles and spent the big money on that , my first bike since I bought a new 1999 cr 250. I did put yamaha stickers on my ktm though
@THMXCO
11 ай бұрын
Wow! haha love it man
@jeremywilson7198
2 ай бұрын
You will love the pro taper perch, it makes a very nice difference and it is very hard to break
@nvmcrider8475
11 ай бұрын
Put 3 YZ 125 clutch springs in it. Yamaha's are super reliable because they error on the side of longevity, the softer clutch springs will work fine. The YZ 250fx is a better all around bike with a soft clutch pull, 6 speed trans, and electric start.
@cw3728
5 ай бұрын
Have you oiled the clutch cable?
@austinhoffa99
8 ай бұрын
Yz all day !!!
@krispewkrem3
3 ай бұрын
I ran a Magura hydraulic clutch on my YZ250 and it was absolutely amazing. I’ve ridden a few KTMs and it felt pretty similar. The stock YZ cable clutch was obviously lacking compared to KTM.
@mt1885
11 ай бұрын
I wonder how that Lighting Coil replacing the Stator as like to do some night time woods riding. I wished like the old WR's they had a factory lighting coil.
@ronwest7930
4 ай бұрын
I am wondering if the 250x can power lights so I can make it street legal.
@hennomeyer3236
7 ай бұрын
Does the 2023 have a smaller feul tank?
@chadrides914
11 ай бұрын
I disagree wholeheartedly about the clutch pull!!!! Cable clutch is soooo much more responsive than hydraulic clutches on ktm etc. the cable clutch is why I have been hesitant to go euro
@jimbo4203
11 ай бұрын
Right if you're cable is adjusted the way you like it and lubed it's perfect
@davidbeauvais1364
11 ай бұрын
Your are definitely wrong
@funkNretro
10 ай бұрын
Meh I've had 3 orange bikes it's not a deal breaker but my personal preference is cable actuated. The pull might be slightly lighter but I hate the on-off feel of the hydro clutch.
@davidbeauvais1364
10 ай бұрын
@@funkNretro There is no on off feel it’s progressive when you got fresh plates and proper adjusted and bled. If it wasn’t those euro bikes wouldn’t dominate off-road and enduro comp. You’re talking out of your arse.
@imagri1
9 ай бұрын
Hydro clutches just don’t give the feel like a cable operated clutch does.
@jacobdavies251
9 ай бұрын
I had a yz. Went over to a 23 300xc and the difference is crazy on the low end. Yz is just as snappy as the 300’s on the green map. One thing i noticed is the 300 makes it a little easier to hookup in the woods. Both are similar in the desert
@tred2832
11 ай бұрын
After a few days of owning this 2023 yz250x, I can confirm what Ty says in this video is accurate for me as well. This bike is the "30-06"/"Swiss Army knife" of dirtbikes. It is simple, and it does a lot of things very well. Is easy to run for most riders and has been around in some version for a long time so parts and data and videos are plentiful. Question: What about a Rekluse? Do away with the clutch. Will you ever try that on this bike?
@THMXCO
11 ай бұрын
Cheers! I'm not a fan of the auto clutch just because I really like to have my fine tuned clutch control
@easternyellowjacket276
3 ай бұрын
@@THMXCO You can use the clutch on a Rekluse Auto just like a regular clutch. The only difference is it is very difficult to jump start a bike with a Rekluse. Other than that, you don't have to worry about stalling, and you can go up a gear and just lug around all day without killing your hand, or if you wish, use the clutch like regular.
@jonruger
11 ай бұрын
A lot of us older riders still like cable clutches I’ve not had hard to pull issues since the 80s. I don’t like the on/off feel of a hydraulic clutch many riders are that way.
@aidanmahaffay719
11 ай бұрын
Couldn't agree with you more its the do it all motorcycle, I'm surprised your having issues with clutch pull I wonder if they went with stiffer springs in the newer years? My 19 250x is almost as smooth as my buddy's KTM hydraulic.
@THMXCO
11 ай бұрын
It's not bad at all for a day or 2 but I ride so dang much that it's just enough to really agitate my fingers. Pretty sharp pains after about 6-7 days in a row of riding slow technical stuff
@aidanmahaffay719
11 ай бұрын
@@THMXCO Gotcha, yea I could definitely see after continuous riding it would start to get pretty bad, I've got the same problem with my wrist and that flares up after only 2 hours of technical riding😆If youre ever in SoCal hmu to do some riding I know some good spots!
@mxr248
11 ай бұрын
I’m sorry but cable is so much better than hydraulic feel. Don’t know why some ppl complain when we are men! What some ppl do is put a lighter spring or 2 across from each other on the pressure plate. Makes it pull super easy yet won’t hurt it. Bought a yz450 the same exact year I already have and it pulled easier. It never bothered me either way.
@jaywalk6628
11 ай бұрын
yz cable is way better.
@Iride505
11 ай бұрын
Run a rekluse auto clutch I’ve got one and love it.
@robertbaker9329
10 ай бұрын
I also have a 2023 yz250x and it does have amazing low end it will lug and lug and not die I haven’t rode a Ktm so I can’t compare the clutch pull but mine isn’t too bad but maybe that’s because I haven’t used a ktms clutch lol
@RideWithTheWolf
11 ай бұрын
I put the folding adjustable levers on mine and my lever control is like butter.
@THMXCO
11 ай бұрын
Shoot me a link! Would love to see them.
@chadrides914
11 ай бұрын
Yz cable clutch is absolutely dreamy good
@RideWithTheWolf
11 ай бұрын
@@THMXCO I tried to send you the link but I guess KZitem removed it.
@JoshuaCussins
11 ай бұрын
My guess is the 1 thing you don't like about the YZ250/x, is the: Vibration! Edit: well I guess it was not the vibration that you least like, but rather clutch pull, ill admit, the clutch pull is very nice on my 19 tx300 when compared to my YZ270.
@THMXCO
11 ай бұрын
Hey! Heck ya! The vibration really isn't bad on these YZ's! Love the TX300's!
@RideWithTheWolf
11 ай бұрын
My yzx still came out to more than $10k by the time they added like $2500 in fees ...
@THMXCO
11 ай бұрын
@@RideWithTheWolf Idk where you bought from but you got ripped off man
@RideWithTheWolf
11 ай бұрын
@@THMXCO the list is $7799 plus destination prep and tax. I'm not special, I don't get special treatment.
@THMXCO
11 ай бұрын
@@RideWithTheWolf I did get a deal from my local dealership but even if I hadn’t gotten that deal they are still $8500 out the door at my local dealership so that’s just insane
@scottpeters8640
4 ай бұрын
I have owned, raced, or ridden a bunch of the aluminum framed YZ models, 2- and 4-stroke, and I never ever find the clutch to be an issue. I also owned a KTM 450 Factory Edition and never noticed the hydro clutch being any better.
@yammytime4273
3 ай бұрын
This is probably due to the fact that when you're having fun you don't give a shit haha
@Xcolombox1
11 ай бұрын
I only really ride ktms. my main bike is a sxf 350. I ride motocross and do harescrambles. But I really want a yz 250 to beat in the trails and some harescrambles. Im so used to hydraulic clutches and electric start. But id also like to try some KYB forks. I have AER which kinda sucks in the woods
@JustTip922
11 ай бұрын
I was on big bore 4t ktm’s of the past 15yrs. I went with a yz250x this year and I couldn’t be happier. The only thing I miss is the e start.
@chadrides914
11 ай бұрын
@@JustTip922 don’t you agree the cable clutch is incredibly comfortable to use and as easy to pull as the hydraulic!? I think it’s a big lie that the hydraulic clutch is easier than the 250x or the 250f
@kirkthepimp1
11 ай бұрын
I’m about to get the 6500 wp on my 19 300xc I hear they are amazing
@JustTip922
11 ай бұрын
@@chadrides914 honestly the only difference to me is that I check the cable slack before each ride.
@mikebishop6095
11 ай бұрын
29 clicks out on the rebound on the rear shock I’m at 17 front rear compression and same on rebound as well
@THMXCO
11 ай бұрын
Love it! My local suspension guy told me to set the clickers all the way out for XC/Enduro and nearly all the way in if I'd like to do some moto!
@seamarsh3756
8 ай бұрын
surprised those clicker settings work for you... seems cray to runn rebound all the way out!? it's it out of control? what class you ride? thx
@THMXCO
8 ай бұрын
Hey man! It is buttery smooth! I weigh 188lbs, Ride A class in motocross, B class in Offroad races!
@danielgreen2339
9 ай бұрын
Go hydraulic clutch mate . You haven't tried everything they are amazing. I had one on Yz250 19. Waa amazing
@videocardzrule354
28 күн бұрын
Man, the new 2023+ KTM300’s are probably the way to go. I would love to get a YZ250, but KTM has more power and torque, electric start, fuel injection, better lugging, and the bikes are always tuned good because of the EFI. I wish Yamaha would add those things.
@Wuestenkarsten
5 ай бұрын
Fantic is coming up with exact that Engine and Hydraulics....Fantic belongs to Yamaha now. Good Cooperation!
@mark_Hershey
7 ай бұрын
How’s jetting? I cant imagine messing with jets anymore after fuel injection 300’s.
@elcincero321
8 ай бұрын
Fuel economy?
@benmartin6476
11 ай бұрын
Or a beta 300 or Sherco 300 or rieju 300 or and here’s the big one If you can get one like I did A TM 300en
@ManWePaid
10 ай бұрын
what kinda oil you running i’m getting a 250x soon and i run a banshee 350 right now and don’t really know much about the lugging life
@THMXCO
10 ай бұрын
I run Lucas Oil Semi Synthetic in my tank and Shell Rotella 15W-40 in my gearbox! Cheers!
@ManWePaid
10 ай бұрын
@@THMXCO keep at that grind stone man if you keep putting out quality content a videos gonna have to bite sometime
@easternyellowjacket276
3 ай бұрын
I don't want fancy. I want simplicity and proven reliability with an enormously cheap selection of aftermarket parts and accessories. And the YZ250X delivers that in spades as well as highly competent and fun riding experience for the woods.
@jonsainsbury8726
8 ай бұрын
300 hrs on 2020 YZ250X Apex SX Head Apex jetting chart GYTR Flywheel 14/51 gearing Powervalve spring tension washer removal mod for more low end
@obedjimenez6854
3 ай бұрын
I have a friend that is telling me to buy a YZ250 for woods, trail and enduro riding because it has a better motor and transmission setup than the YZ250X. What is your recommendation or suggestion being an owner of both models? Thanks.
@THMXCO
3 ай бұрын
The YZ250X is much more suited for a woods bike purely from a suspension perspective. You won't be dissappointed, it really is the tool for the job.
@nocensorship2253
11 ай бұрын
I love my 2003 yz 250 / It 465cc 2 stroke, see ya!
@Briank-ef5iq
9 ай бұрын
Yz is probably the best bike on the market for the weekend warrior
@josephshaw2747
11 ай бұрын
When are you planning to do a top end? I've got 50 hrs on my 2022 and I'm planning on doing the 1st at ~75 hrs. With my riding style of mostly intermediate riding speed on open trails and a lot lugging the bike in tight stuff with the occasional full throttle run through the gears, I think this should be conservative enough. You said you've had 6 YZ 250s so I figure you may have insight on this.
@THMXCO
11 ай бұрын
I plan on around 100 hours!
@josephshaw2747
11 ай бұрын
@@THMXCO Nice. So that's when you've done them on your past bikes as well? Only asking cause sometimes it's hard getting a straight answer on the forums. One guy says 30 the other says his was fine at 120 lol.
@THMXCO
11 ай бұрын
@@josephshaw2747 I've seen them go up to 200 so I figure 100 is perfect for tehcnical hard enduro/Xc riding
@mdgeroy
11 ай бұрын
You forgot to mention a Ktm300 is a 6 speed. I love Yamahas but 6 speed close ratio trans like on a 300xc is the best.
@billburden9381
11 ай бұрын
What is the brand name of your hand guards? I like them, they are simple and look tuff! Thanks
@THMXCO
11 ай бұрын
Hey Bill these are the sxslideplate.com hand guards!
@billburden9381
11 ай бұрын
Thanks, I like the look.
@THMXCO
11 ай бұрын
@@billburden9381 They're incredible and have saved me a lot of levers already! The skid plates are even better!
@billburden9381
11 ай бұрын
@@THMXCO thanks , appreciate the info. I just started riding again after several years and have a yz250 and a 02 cr 250 husqvarna I restored. I used to be all motocross, but now enjoying off road much better. Thanks for info! Bill from Oklahoma!
@SemblanceMusic
Ай бұрын
" This is my 40 hour review " Have you had to put a new piston or rings in yet ? Dope bike by the way! Currently saving for a 2023 and im torn between this and the 125
@maxcheerio6837
11 ай бұрын
100 percent agree have 40 hours on my 250 X and ride everything from Rocky rough pipeline to big mud pits to massive sand pits to take single track to Supercross track. It really is a Swiss Army knife gearing is a little messed up for the track ether to high or to low so don’t get it if you’re only riding track that being said it can clear doubles like nothing. And has good top end speed toped out in 5 in dirt roads does 125 kilometres an hour no problem
@CodMontager
4 ай бұрын
The Yamaha 250 x is much better than the ktm in my opinion I’ve ridden both and I feel the Yamaha is better geared for enduro due to the power being so powerful lowdown getting over the medium to high logs and taking the steep hills easily with a blip of the clutch. Plenty of power standard to do everything a standard rider will be riding on.
@truthsetsyoufree77
11 ай бұрын
Esr kit and magura clutch and you will be all good 😁🤙🏿
@zbignoz.tunnlerwitz_109
11 ай бұрын
Pol Tarres says he runs an "old trials secret clutch mod" on his 250x, but leaves it a mystery. I put a Magura Hymec on mine, the lack of "feel" is only because now I can feel my hands.
@bystander15
10 ай бұрын
The cable pull is brutsl for clutch
@Wilkesy259
9 ай бұрын
Mate i honestly think u may have got the ONLY YZ250 with a heavy clutch pull 😳 one of the current rides i have is a 2019 YZ250X (VHM head, V-force reedblock, flywheel weight, full GYTR exhaust off the MXer) and it has the lightest clutch ive ever ridden with (i have hydraulic clutch equipped bikes) and my mates all ride Euros and its lighter then theirs, plus the engagement point/feel is better 👍
@quirinm.
9 ай бұрын
Hydraulic clutch you are used to probably is worn out, my friend bought a new 450exc and the clutch was way more soft than on my 2017 450 even though it should be the same in theory
@Wilkesy259
9 ай бұрын
Nahhhh my magura hydro is brand new mate, not worn at all 😃 and my mates bikes are brand new KTM's (also not worn out) and as i stated the other mates YZ250X's cable clutch is waaaay lighter 🤷♂️ 1 finger operation all day long.
@kellybrown6988
8 ай бұрын
@@Wilkesy259 put a FLO clutch perch/lever. It’s so light and smooth.
@dannycox4909
11 ай бұрын
I ride in the ozark mountains. How would the suspension handle rocky single line trails ?
@THMXCO
11 ай бұрын
Run the clickers near the softest setting and you will be a happy man! So plush
@dannycox4909
11 ай бұрын
Thanks man. I just subscribed. Looking forward to seeing more content. Yamaha owes you commission because I’m about to purchase this bike.
@THMXCO
11 ай бұрын
@@dannycox4909 I appreciate that man! I hope you enjoy it. It's an amazing bike. Love it to death honestly.
@EarthSurferUSA
8 ай бұрын
Everybody runs their handle bars high, and I have never seen so many slow riders in the corners (go-pro vids). Lower them so the ends of the grips are pointing down (not doing freestyle or SX rhythms), set the rear sag at 100mm (instead of 105 plus), and get better front end control in the corners with less 'twitchy" steering feel. Or you can make noises like a sheep stepping on egg shells around the corners. :)
@Dat_Sun
11 ай бұрын
I had the magura hydraulic kit on my 22 yz250fx, pull was not very good. Fitment is generic, different mount for the slave and different slave lengths. Otherwise the same. Sold it, got a ktm.
@baruc4079
11 ай бұрын
Did you get a 4 stroke ktm? And how is It compared to the yz250fx
@mikejefferson2880
6 ай бұрын
So I have the Apex head, flywheel weight,estart and magura clutch . I think the most well rounded reliable bike you can own. It does everything well. Buy a used one for 4500 dump 2k into it . Watch all your ktm boys overheat and complain they can’t get parts .
@dalepellerin
10 ай бұрын
This is my dream bike
@DSLRvideonow
11 ай бұрын
Clake clutch could be an option
@thomasknapp7236
8 ай бұрын
No electric start. That sucks if you kill it on steep single track! Im a yamaha fan. Always have been. Best ergos out there. I went Sherco 300 this year bc it reminds me so much of the yz.
@bobbyburnah8106
4 ай бұрын
Carbureted and kick starting is all you need💪🏽
@THMXCO
4 ай бұрын
That's right!
@user-ty6nz5ec8o
5 ай бұрын
I have a 21 YZ250FX, it’s my first four stroke and the clutch pull is butter. I want to go back to a two stroke and the only thing stopping me from buying a new YZ two stroke is the lack of a starter.
@TheStephenspann27
5 ай бұрын
You can add it with a panthera kit
@easternyellowjacket276
3 ай бұрын
Seriously? Have we become so soft that a quick jab with the left leg negates the joy of riding a YZ?
@ejb2184
8 ай бұрын
Am thinking about selling my 22 250x for a yz 250x my 250 stalls way to easy and don’t like to lug
@Sers0812
11 ай бұрын
Here in Europe we dont have the x-versions. Do you think a normal one with an 18 inch rear will do the job, too. I just like the japanese more than the europeans
@THMXCO
11 ай бұрын
Absolutely! There really aren't too many differences man!
@Mutiny-5050
6 ай бұрын
I could be wrong but it sounds like a biast review with the previous 6 before . The crazy thing is all 6 are the same bike over the last 20 years . Minimal r&d and changes . (Bold new graphics ) good bike IMO and the price is fair , but rising . Is it worth it to spend the extra 2-3 k? Absolutely. If your ever in Oregon hit me up . We will smoke that top end , lol J/k . Great review, now do a 40 hour TBI review.
@itsumoto87
11 ай бұрын
Very nice content! Lets ride bro
@RussianAudiFILMS
5 ай бұрын
beta 300rr is the ultimate 2 stroker
@johnhouston3681
11 ай бұрын
As a hardcore yz250 guy myself, the stock clutch pull is great. Just have to keep the cable fresh. I have ran the magura hydro clutch, amazing. Had to put it to the wayside to fix the real issue with the yzx, electric start. That is the only thing to complain about. I put the panthera kit on and havent looked back. I cuss at the inconvenient air filter service, but worth it. Get a new clutch cable and quit crying.
@THMXCO
11 ай бұрын
Lol the clutch pull is terrible. I ride a lot more than you though guaranteed (daily for 2-3 hours) so that's probably the reason I notice it more. Go sit on your bike in your garage every single day for 35 days straight and pull it in 300-600 times each night (I ride mainly slow technical terrain and CONSTANTLY use the clutch for control) Then come back and tell me to quit crying when your fingers have sharp shooting pain. I've ridden 300's on the contrary for days in a row with the soft hydraulic pull. I could ride them endlessly and never have issues with overuse injuries even on the worst days when my hands are sore. To each their own but I definitely disagree that it's "great"
@johnhouston3681
11 ай бұрын
@@THMXCO sorry, i have a job. I just wash my bike. Never gets ridden. Sorry, didnt know you were so awesome
@THMXCO
11 ай бұрын
@@johnhouston3681 Had enough of the smart comments from people "quit crying, man up, grow up, you sucks, yada yada yada" Not trying to be that guy man..sorry. I need to stay out of the comments honestly I do it to myself.
@johnhouston3681
11 ай бұрын
Try being nice.
@hennomeyer3236
8 ай бұрын
Does the 2023 model have a smaller feul tank than 2022? Thanks
@fullthrottlewv6097
7 ай бұрын
Yes its a 1.8
@hennomeyer3236
7 ай бұрын
Thanks. Have you checked how many kilos you get on full tank?
Пікірлер: 309