I wish this guy lived nearby I’d hire him to build my outbuilding in a second. Honest builder who handles it all. Rare around my part of the country. Thanks for the vids Ken.
@kenskarpentry
3 жыл бұрын
Thanks
@spikeboston1237
3 жыл бұрын
Wonderful as usual. 8” rise is a steep step for me.
@soroako4142
3 жыл бұрын
Another interesting & informative video from the "most laid back Karpenter" in the USA.
@kenskarpentry
3 жыл бұрын
Thanks for watching
@stevet621
3 жыл бұрын
Always a pleasure to watch. Thank you!
@kenskarpentry
3 жыл бұрын
Thanks for watching
@footpathjunkies1051
3 жыл бұрын
Thanks Ken...keep the episodes coming...Im gonna come work for you when I retire..lol...This is good stuff
@kenskarpentry
3 жыл бұрын
Haha
@billkiessel6682
3 жыл бұрын
when having a stressful day working in front of the computer at home I love to take a short break and watch your videos, very relaxing! Thank you
@kenskarpentry
3 жыл бұрын
Thanks for watching
@ecoluhur2114
3 жыл бұрын
You are a Super Good teacher. Explanation is simple, easy to understand, right to the point. I am no handyman but always enjoy watching you building garages. Thanks Regards
@kenskarpentry
3 жыл бұрын
Thanks for watching
@rob2063
3 жыл бұрын
Great Video Ken. Thanks for sharing the insight into how you cut & install the I joist for the stairs !!
@kenskarpentry
3 жыл бұрын
Thanks
@weremodel
3 жыл бұрын
Makita 5007. I have been using for years. Just got a new one. Old one wore out. Left handed carpenter using a worm drive? No thanks. Sidewinder is just an extension of my left hand. I knew there was something good going on with this channel. Used a Makita 16" beam saw today to cut off 6x10 treated posts for pole building storage at the home of good friends I built 27 years ago. Nice to be back at the place. Good stuff you show. Thanks.
@kenskarpentry
3 жыл бұрын
Thanks for watching
@stratmaster5
3 жыл бұрын
I really enjoy your videos. Never boring always informative and entertaining. I love it when I get a notification that you have posted a new one!
@kenskarpentry
3 жыл бұрын
Wow thanks
@terrymcgillicuddy8056
3 жыл бұрын
Great job Ken. Thanks for more tips 👍
@kenskarpentry
3 жыл бұрын
Thanks for watching
@khagindratri6781
3 жыл бұрын
Ken, you make look this stuff so easy. Even I am inspired to build a staircase,
@kenskarpentry
3 жыл бұрын
Nice. You can do it.
@samwoo7935
3 жыл бұрын
Nice work again!! Looking like your saw horses are getting a little tired though. ha ha
@kenskarpentry
3 жыл бұрын
Haha yes
@donbearden1953
3 жыл бұрын
Ken, thanks for the video on the stairs. I would have been happy to watch with more detail or basically every cut and attaching every step and all bracing and supports. To me building the stairs takes a master framing carpenter. I wished that you came to the Deep South to work for the winter.
@kenskarpentry
3 жыл бұрын
Thanks for watching. Yes that would be a long commute
@machinenoise9622
3 жыл бұрын
You are a legend 👍🏻
@kenskarpentry
3 жыл бұрын
Thanks not really
@DavidLee-wx6dg
3 жыл бұрын
Since the day I bought my first Makita rear handle 36v battery saw I have not used my corded Mag 77 skilsaw . We, and most rough framers now , do not roll out a cord except for the compressor
@deanbarr5740
3 жыл бұрын
Looking great
@kenskarpentry
3 жыл бұрын
Thanks
@jameshalliday412
3 жыл бұрын
No shot of the finished stairs with the ceremonial first walk up/down?!?! Talk about a let down! : ) Great video, as usual, Ken! You are the most relaxed and efficient worker! (Unless you're just a really good editor :P) Keep up the great work!
@kenskarpentry
3 жыл бұрын
Thanks it’s coming in another video
@inekelassooij840
3 жыл бұрын
Groetjes uit Holland 👋🏼 Het ziet er goed uit mooi gemaakt top!!🥳🤩🤩
@brianlukus9494
3 жыл бұрын
Ken, You need an "As Seen on KZitem" sticker on your trailer! :)
@kenskarpentry
3 жыл бұрын
Yes thanks
@frankortolano5886
3 жыл бұрын
Makes it look easy,lol
@rightlanehog3151
3 жыл бұрын
Ken, I want to give a 'shout out' to those saw horses. I thought there was a KZitem rule making it mandatory for carpenters to balance lumber across their leg, hold it with their other hand or clench it between their teeth before they cut it wildly with a circular saw. ;-) I hope everyone notices how much #easier it is for a left-hander to use your basic 'right-handed' sidewinder saw.
@kenskarpentry
3 жыл бұрын
Haha. I use them if they’re handy otherwise it’s like you said
@bard44
3 жыл бұрын
Love your videos. Have watched them all since the beginning. Just wish they were a little bit longer, like maybe 30 minutes, to get in more content for a week. Very informative! keep up the good work
@kenskarpentry
3 жыл бұрын
Thanks for watching
@louish.9414
2 жыл бұрын
1/2” blocking on wall stringer for drywall
@hackclassics163
5 ай бұрын
Outstanding job What’s the length of the stairs well
@kenskarpentry
5 ай бұрын
About 9’
@kenfarley957
3 жыл бұрын
Ken your work is impeccable. I enjoyed the stair layout, fabrication and install. Did that 5/8 ply cost one arm and one ball? Damn it's getting expensive.
@kenskarpentry
3 жыл бұрын
I think it’s finally turning around
@blackfly53
3 жыл бұрын
I'm also a carpenter and my name is Ken! What a coincidence. Question, you used a framing nailer for the landing and screws for the treads so I am assuming you did that to eliminate squeaks? We typically screw everything together and rarely use nails in case a mistake or something changes, we can just unscrew it to change it if need be. To clarify we use an air nailer for sheathing to save time but screws for "technical" stuff like what you were doing. Love the channel and the pricing updates.
@rogerbuchanan8154
3 жыл бұрын
Thank you
@SteveP-vm1uc
3 жыл бұрын
I've just watched a bunch of your videos. You do a nice job on both the buildings and the videos!! I am wondering if you have built any shops/garages for an automotive life??
@kenskarpentry
3 жыл бұрын
Yes a few
@IRAKLICHIKHLADZE
3 жыл бұрын
Ken, thank you for all the episodes. I love watching all of them. Quick question, have you ever used scrail fasteners. Wondering what you think of them if you had used them at all.
@kenskarpentry
3 жыл бұрын
No I’ve never used them. I looked them up they sound interesting
@RayJustice
3 жыл бұрын
Ken, love watching and have learned so much. Question, could a person run the header board to the I-Beam on 16" centers without having to have another ibeam installed right next to the other one? then install an additional ibeam from header to front of garage?
@kenskarpentry
3 жыл бұрын
Hmmm. Sorry not sure
@DiscoFang
3 жыл бұрын
"Follow suit". It's playing-cards speak.
@kenskarpentry
3 жыл бұрын
Oh. That’s right
@DiscoFang
3 жыл бұрын
1 view, 1 like, 1 comment. It must be Friday night.
@kenskarpentry
3 жыл бұрын
Thanks
@Tomhohenadel
3 жыл бұрын
Ken, is this the 30 x 40 garage. Can’t wait to see the finished product
@kenskarpentry
3 жыл бұрын
No we haven’t started building that one yet
@user-ue6bl1ef7b
3 жыл бұрын
👍👍👍
@konakona997
3 жыл бұрын
we all say good and level when on cam
@kenskarpentry
3 жыл бұрын
Haha yes
@hanzon
3 жыл бұрын
I´m first here 👍
@molitovv
3 жыл бұрын
They are pretty steep stairs, OK in a garage I guess?
@ML-lg4ky
3 жыл бұрын
2x8 walls?
@kenskarpentry
3 жыл бұрын
2x6
@williamsmith7221
3 жыл бұрын
Follow suit what’s that mean hahaha
@kenthesparky178
3 жыл бұрын
Can you please stop making it look so easy, being a retired electrician I feel ashamed of myself when I attempt to do joinery work.
Пікірлер: 72