Love this kind of video. Love the low rider, laid back, styling on these older bikes. I'm 69 and have an American import VT600 Honda Shadow. I'm on it most days. Best wishes from the Belfast Castlereagh hills of Northern Ireland.
@kicks_one_eight
Жыл бұрын
Love seeing old bikes come back to life 💪🏼
@rcnelson
Жыл бұрын
Seeing the Vulcan fire up was more exciting than pon farr.
@stevewhite7875
Жыл бұрын
BEST video yet on how to get the carbs out of a 88 :) the only thing you need to do is strip the carbs in half to give them a REALLY GOOD CLEAN & I mean a really "GOOD CLEAN " They are a PAIN in the ARSE to get right ! (ask me how I know LOL ) Also check the diaphragm's on the side off the carbs they may be stuck !! Regards Steve
@davidsharpe7644
Жыл бұрын
Making the seats nice and wet, what a hero!
@bryco32
Жыл бұрын
Always liked these. Comfortable.. Fast enough and reliable. I need to look for one again..
@spacetruckin6555
Жыл бұрын
It ran, you win. Nice job and congrats on a cool old bike!
@paulfairbrass4424
Жыл бұрын
Just caught your video, love the vulcans. As you know carbs left that long will have varnish everywhere. And ive found at my cost, not clearing the fuel system completely over winter just causes fuel to go to jelly. Hope it goes well with the tank, that's some job itself.
@kevin34ct
Жыл бұрын
Great job. I bought a 2004 Vulcan Classic 1500 this year. These bikes are great. Love riding it. I put 8K miles on it this year. I ride as often as possible, even take it to work a couple days a week. Can't wait to see what you do to clean up some of the Chrome. I have some corrosion on some parts and need some pointers on how to clean it up.
@13yearsaprepperr.jtilbury.51
Жыл бұрын
finally some one that washes first ,, i see so many that leave 2 inches of mouse shit on things ,,,, well done mate , Rob NSW Australia
@mertensworkins9128
Жыл бұрын
Thanks friend! I’m not a fan of working on things filthy if I don’t have to lol
@garethjudd5840
Жыл бұрын
Looks great. Just needs a good clean and service 👍
@stevetealey2804
Жыл бұрын
Still a nice-looking bike for its age well done getting it up and running.
@johnpage1922
Жыл бұрын
Nice, well done on getting her fired up a bit, pilot jet probably still blocked on one carb or a sticky float needle too. These are really nice bikes to ride once sorted only 4 speed but mega torquey. I'm a sports bike guy but was getting a bit older so thought I'd try a cruiser and was really surprised how much I enjoyed it! It's not fireblade but was plenty quick enough and handled OK too. Good luck on sorting ye olde bubf out.
@coplandjason
Жыл бұрын
Nice one, I had a 1995 Vn15SE, same colour as your bike, very similar in all respects. Great bikes
@rodneykandel3162
Жыл бұрын
YES.. I used to have a bike just like that one. It was a good old bike. It was a torque monster and pretty quick and nimble. It a bike I wished I would have hang on too. Thou I am a big guy and it was a little small for me. But it was so fun to ride.
@specialse
Жыл бұрын
Bike dry stored for decades....better totally submerge it in water before attempting to start it .......i have an 88 SE , was about the same condition as yours when i got it. much work but do like it. good luck .
@geraldscott4302
Жыл бұрын
Wow. I have a 1997 Vulcan 1500 almost exactly like that that I bought brand new. Almost the same color, and it has the cast wheels. I have put 67,000+ miles on it. It looks a lot better than that one, but is beginning to show its age. It still runs great, but it's getting hard to find parts for. Many of the rubber parts have started to deteriorate, and ethanol gas has done a lot of damage to the fuel system. It's getting hard to find fuel system parts for it. Be aware that these bikes have a plastic oil pump gear which was VERY failure prone in the Vulcan 1500 Classic, but seems to hold up a lot better in the BUBF (Butt Ugly But Fast) bikes like that one. I'm surprised mine has not failed yet.
@JohnSmith-cf4gn
Жыл бұрын
I'm surprised too that your oil pump gear lasted that long. Mine stripped on me at 27,000 miles. I have a 1995 1500 Vulcan.
@chrisgaskill7923
Жыл бұрын
Your destroying things with that high pressure
@mertensworkins9128
Жыл бұрын
I assure you my little electric craftsman hardly has enough pressure to clean the bed of my truck, I’m not gonna lose sleep over it:)
@richcxx
11 ай бұрын
Damn man that pressure washing was painful to watch! Well good luck….
@johney4484
Жыл бұрын
Power washing is probably the worse thing you can do. All that high pressure water gets into the electronics.
@mattivirta
Жыл бұрын
ALL bike and car need first pressure wash good before start repair anythink. not newer open any parts if not has before all clean good .
@walterherrera6614
Жыл бұрын
i have the 1996 and still works good
@MasterCorporalK.Storch
Жыл бұрын
The bike that’s sitting in my grandpas shed has been sitting for 30 years, it’s a old 1968 suski k15p and we have to tear down a wall to get the bike, hopefully we are going to get the bike running
@michaelwilliams4974
Жыл бұрын
First thing I would’ve done with change the oil
@dale5303
Жыл бұрын
Never put new oil in something if dont know if itll run or atleast pop off
@michaelwilliams4974
Жыл бұрын
@@dale5303 It’s called doing a compression check first if that’s good and you got spark you know it’ll run!
@dale5303
Жыл бұрын
@@michaelwilliams4974 oh good so youd do that first then not change the oil.
@hakim9821
Жыл бұрын
@@dale5303 lol😂
@treadhead
Жыл бұрын
TAKE THE GAS TANK OFF & USE AN AIR COMPRESSOR HOSE TO BLOW OUT FOREIGN MATTER , *** CHANGE THE. ENGINE OIL , SPARK PLUGS , IF ABLE TO START ADD CARBURETOR CLEANER TO MIX WITH. FRESH GAS . ( NO START / IDLING ISSUES , REMOVE CARBURETOR ( S ) AND REBUILD / CLEAN - VARNISHED NEEDLE VALVES / FLOAT BOWELS ? )
@russparker71
Жыл бұрын
"So I'm gonna power wash it". Yep - that was your first mistake right there!
@iluvmondays
Жыл бұрын
ihavent seen an actual model liked this. but its a beauty. i have a vulcan s
@kevinpollard1550
Жыл бұрын
Iv always fancied one i had a 1500 drifter 15 years ago
@bigdubb_t9563
Жыл бұрын
The rear carb probably needs the float removed and the needle valve most likely has debris in it, take it out and flush it with brake cleaner and a little compressed air. With the amount of rust in that tank it wouldn't surprise me and stale fuel varnishes up internals quite badly.
@Bassman1999
Жыл бұрын
Bad bad idea using a power washer with such a concentrated powerful jet! Common sense should tell you that!!
@xcboothmanxc1
Жыл бұрын
Matters the GPM of the pressure washer not the stream, obviously wasn't a big pressure washer and didn't hurt anything lol
@bobvido9875
Жыл бұрын
@@xcboothmanxc1 LOL. It seams you never used a pressure wash! 🤣🤣🤣
@mattivirta
Жыл бұрын
pressure washer have perfect clean old bike before start repair anythink. if i repair my bike or car i first alltime pressure wash all car or bike perfect clean, not newer open any parts if not has first clean all good.
@juslytinah1978
Жыл бұрын
Very good sir
@kev1163
Жыл бұрын
the first video ive seen of yours, i subscribed to see if you get it running right.
@dutydruid9375
Жыл бұрын
Properly cleaning the carbs would have been a good start.
@nilseckerbom6826
Жыл бұрын
It is Jpanese quality bike, so it will start very easy after oil and battery change
@BAtadCrazy
10 ай бұрын
Wish there was an update. Oh well.
@francisgiles8623
Жыл бұрын
I got a 94 If it ever needs a good home Git ahold of me😊
@oranumics
Жыл бұрын
I currently own one,that motorcycle is a headache
@MegaTroyhamilton
Жыл бұрын
More updates please.
@geebopbaluba1591
Жыл бұрын
You should just walk away because of the timing chain and sliders are so bad about failing because of poor quality and the engine has to be removed and disassembled to replace all the parts. I had one and it was way to much work and money. I’m just giving you my personal opinion and experience.
@redminote6pro291
Жыл бұрын
Seems like you're a quitter.
@brianjacobsen8878
Жыл бұрын
You need a better tank . There's no cleaning and tank coating that can fix that.
@davidmiller2811
10 ай бұрын
Cranked it on unlubed cylinders
@likeablelabradoodle4035
Жыл бұрын
My grandpas Yamaha rx100 started after like 1hr of kicking after 27years
@johneldred1515
Жыл бұрын
Note it is a 1200 cc so may not be the same deal sounds like you may have it and the new batt good.
@oledirtydoc3001
Жыл бұрын
It's a 1500
@markduncan6690
Жыл бұрын
It best to keep that water spray away from the Electrical Components!
@superbears7562
Жыл бұрын
Just bought one and having issues getting the bike to crank via the kill switch when I jump the relay it cranks any thoughts also do you have to hold the clutch to crank the bike ? ..
@jorgemorais4005
Жыл бұрын
Do you know someone who exports these vehicles to other countries, with their own shipping system?
@mrcru53
Жыл бұрын
Does the Vulcan run now? What was the issue?
@3MContent
Жыл бұрын
Almost died on one of these after the throttle locked up lkl
@markduncan6690
Жыл бұрын
Could it be the Fuel Pump?
@michaelc9128
Жыл бұрын
Man watching you pressure wash that bike like that hurt my eyes....
@stephenwalsh8184
Жыл бұрын
🏍👍
@markduncan6690
Жыл бұрын
That “Idle” doesn’t sound correct!
@chrisgaskill7923
Жыл бұрын
Too much starting fluid robs the cylinder and rings of oil .......
@oledirtydoc3001
Жыл бұрын
They make starting fluid with upper cylinder lubricant
@sbsb4995
Жыл бұрын
That is a terrible way to wash the bike. A very lazy way.
@mertensworkins9128
Жыл бұрын
Just knocking the dust off friend.
@chipblanc6037
Жыл бұрын
Wonderful bikes! I have 3, a 550 and two 900s and all are salvage titles. I'm currently rebuilding my 2021 I just bought with a pushed in front end. I'm excited for you and this beauty. And Yes, @ Sb Sb, that is the ONLY way to 1st wash a 22 yr old barn find or a 2021 wre k, lol.
@mattivirta
Жыл бұрын
best way wash old bike,car,etc first.
@thomaslemay8817
Жыл бұрын
Your Tank is rust held is place by paint. I would not waste a lot of money or time on it . Get something else. You could go rat bike and convert a beer keg into a fuel tank. Learn to weld in the process.
@davidmiller2811
10 ай бұрын
Power washing a bike is THE WORST way to clean it ,you force water into EVERYTHING, DUMB THING TO DO!
@marcomalo02
Жыл бұрын
You're uncle didn't like you much.
@_andamentolento_
Жыл бұрын
Come non lavare una moto... per di piu ferma da anni..
@unokarpa4405
Жыл бұрын
v-образные моторы это уже давно анахронизм, на заре мотостроения эта схема позволила дёшево поднять мощность добавив второй цилиндр используя запчасти от одноцилиндровых двигателей, защита американским правительством от зарубежных конкурентов компании Харли-Давидсон позволило десятилетиями выпускать эту неэффективную схему. Харли-Давидсон смогли сделать из бага фичу и эти неустойчивые моторы вошли в моду, этот Кавасаки - технологическое подражание, позор высокотехнологично повторять неэффективную схему только ради моды, помимо прочего эту схему неудобно обслуживать.
@Daniel-nh8qn
Жыл бұрын
following this strange logic of yours, then also the v6, v8, v12 of noble car manufacturers, are they wrong engines? The v2 in line, allows for a two-cylinder of narrow dimensions (like a mono) offering less aerodynamic resistance. And if you like straight six cylinders, that's another matter .... But the honda cbx or the Kawa z 1300, they were not very graceful and manageable motorcycles ....
@unokarpa4405
Жыл бұрын
@@Daniel-nh8qn v6 и v8 по эффективности оправданные схемы для грузовиков, v12 - оправданная эффективность только для гигантских судовых и тепловозных двигателей потому что большие нагрузки на изгиб коленчатого вала должны быть поддержаны размером детали, рядный двухцилиндровый двигатель жидкостного охлаждения - самое эффективное решение для мотоцикла-круизёра, лобовое сопротивление в данном случае несущественно, для гонок лучший мотоцикл будет иметь рядный четырёхцилиндровый двигатель жидкостного охлаждения, эндуро - одноцилиндровый, для автомобиля эффективна рядная четвёрка, хотите быть самым быстрым - вам нужен электромобиль со всеми ведущими колёсами, хотите скоростную машину для дальних поездок - постройте по тепловозной схеме: бензиновый или дизельный двигатель вращает электрогенератор а колёса имеют электропривод. американские мотоциклы Харли-Девидсон просто модные, они неэффективны, японские подражания чуть лучше с точки зрения эффективности но они смешны. п.с. дюймовый крепёж - это зло. )
@Daniel-nh8qn
Жыл бұрын
@@unokarpa4405 They are points of view .... The V engines (from 45 ° to 180 °) are also installed on racing cars that run at very high revs. Ferrari Porsche AMG, Audi Lamborghini all have V engines. But if effective, you mean cheaper and easier to produce engine, you are right. The ducati gp, the honda Gp, have V-engines and I don't think they are inefficient ... the in-line four cylinders usually lag behind and if they are close it is only because they give the ignition timing irregular just like a 4v (big bang yamaha) ... If you travel with a big air-cooled V2 in the summer in the heat, a trip can become very annoying due to the heat between your legs, with the water-cooling problem partially solved. Harleys are certainly in fashion, but they are also excellent cruising motorcycles, with their flaws, but with a personality that other bikes do not have and never will have .... then they are undoubtedly beautiful (especially those up to a decade ago). .. For inch bolts ... they are simply made in the USA ... and each state has its own rules and regulations ... but one buys the motorcycle for the emotion .... for the rationality you buy a refrigerator ...
@Daniel-nh8qn
Жыл бұрын
however I have a VN1500 if since 1990 with which I have traveled all over Europe. It has always worked very well. A fifth gear would be needed, it consumes a little oil, but it has always given me good emotions .... Perhaps other cruisers were more aesthetically pleasing, but the performance of the VN1500 with two carburetors remains unmatched ...
@unokarpa4405
Жыл бұрын
@@Daniel-nh8qn у обычного человека нет своей гоночной команды которая будет обслуживать его мотоцикл или автомобиль, это десятки часов работы, это дорого, эти гоночные v-двигатели - просто мода, без должного обслуживания они начнут ебать мозг своему владельцу, c 2000 года изменилась политика всех корпораций, больше нет массового надёжного продукта, теперь задача продать модную вещь которая прослужит гарантийный срок и начнёт сыпаться на 1000 частей, в этих машинах и мотоциклах сложнаяч компоновка и спрятаны слабые детали глубоко внутри, это ответ на продолжающийся с 1990х мировой кризис перепроизводства, а теперь ещё кончилось пространство для расширения капитализма и финансовый фондовый пузырь должен оглушительно лопнуть, его можно медленно сдуть но это будет социализм которого так боятся те кого с детства пугают коммунизмом оболгав суть идеи.
Пікірлер: 85