Really enjoying the videos as I get into 22 PRS - but where are the rest of this series, I can only find 1-4, where are the ones with new MDT stock and barrel testing?
@PmBoyle
2 жыл бұрын
I'm loving this series!
@davidmcneil1550
2 жыл бұрын
Thanks. Hope all is going well at school.
@terrykleypas50
2 жыл бұрын
Thanks for the video, Josh. Hope all is going well for you at school. Still haven't found out about Gundies....
@jamesquigley8628
2 жыл бұрын
Would love to try the 457. Be Well.
@Dwayne7834
2 жыл бұрын
Thanks for the series. Good shooting.
@tykeshooting84
2 жыл бұрын
Great video, yet again 👍
@msi1985
2 жыл бұрын
Awesome series 👏 👌
@aussiesteveakastevecallagh2280
2 жыл бұрын
Hey Josh Hope your enjoying your time away at school, Steve .
@Long-gray-line
2 жыл бұрын
Very cool series. Lovin' this:)
@Jeff-mv4yy
2 жыл бұрын
Thanks Josh ! I didnt get an accuracy improvement from my MDT chassis, but as you said, I find it much easier to shoot consistently . Can't wait to see what the IBI does. That little factory barrel shoots pretty darned good. The Eley Match will likely be a better match for the Lilja. My CZ 16" barrel loves SK Rifle Match over Eley. I believe IBI barrels are made to perform best with Sk ammo. But it would be really tough to do exhaustive ammo testing with each barrel. But without doing so, I think the deck is slightly stacked to the Lilja.
@tmurray1972
2 жыл бұрын
interesting series. Those short barrels can group as well.
@dougdishler2086
2 жыл бұрын
Nice i was wondering what the 16 inch barrel looked like in that chassis looks awesome !!! Hope everything is well at school
@Burneygames
2 жыл бұрын
Watching you had inspired me to get into precision rimfire. Just picked up a bergara bmr to give it a try. Looking for suggestions on the bags you use for resting the stock on. I imagine they all do the same thing but wasn't sure if one would be better than another. Appreciate all of the info you put into all of your videos. Going to do an ammo test on my bergara and see what it likes. Keep it up!
@srkmarine1
Жыл бұрын
Were you ever able to do a test with this rifle and the Lilja Barrel? Not able to find a follow-up video on that for some reason. Your channel is great!
@PursuitofAccuracy
Жыл бұрын
Hey ive been gone training for a while but will be getting back on this.. We will be testing a bartlein barrel then the lilja.
@mxj2311
2 жыл бұрын
Great series, very curious to see how the 1/12t doe
@bradenmiller3476
2 жыл бұрын
Hey Josh love the videos. Just got into the precision rimfire stuff telling myself it would be cheaper than shooting my center fire stuff all the time… LOL. Anyways I bought a ruger LRT and hate it. I didn’t know what I was buying at the time and going to swap it out for a CZ457. If I’m going to swap the barrels out on it, is there any reason to buy the 457 precision trainer MTR over the regular precision trainer? There’s about a 400 dollar price difference but if I’m swapping the barrels out I don’t see the need to spend the extra cash.
@biagiocozza8875
2 жыл бұрын
Great series Josh. Which chassis do you like best so far. Which version are you taking to a match?
@CobosDoesItAll
2 жыл бұрын
Any chance you could do some videos with a savage mark ii fv-sr?
@ihunt_
Жыл бұрын
I do love the series on the build but can’t justify the limited increase in accuracy over the stock gun…especially with not testing more ammo…for similar money I would rather bite the bullet and buy a custom barreled action. But love the video series.
@PursuitofAccuracy
Жыл бұрын
Yeah i can totally understand that
@jamesheath9385
2 жыл бұрын
Wow. You found your lost razor.
@SundayNews27
2 жыл бұрын
When you put your Victor Company check rest on the manners VPT was it to wide and flare the ends out? Just got one and it’s a bit tight
@CHenry1951
2 жыл бұрын
Josh, how's school going ???????
@robertmikell7938
2 жыл бұрын
Hello josh, you mentioned some 22 ammo boxes made by someone on Facebook and I can't find them or the video they were mentioned in now that I am ready to purchase can you please let me know
@stevereese6488
Жыл бұрын
I looked at the standard element 4, not the magnesium one, and it says factory magazines only for the cz457. It looks like you are using the anarchy mags with extensions just fine. I was thinking of getting a standard buffer tube with a magpul prs gen 3 buttstock and add the barrel channel weight under the Lilja barrel.
@PursuitofAccuracy
Жыл бұрын
Hey Steve. My daughter uses the element 4.0 and she is using the anarchy mag extensions. Now I will say the ACC is a very tight fit. Meaning you don't have much room to sneak a finger in there to release the magazine. I'm just extremely use to that setup so it's not an issue for me.
@stevereese6488
Жыл бұрын
@@PursuitofAccuracy I'm leaning between this stock and the pdc custom g5c, either one I'm sure I will have to add weight. I just installed the Lilja barrel a little over a week ago. Very happy with it but it's still in the pro varmint stock. I did do the Pete's pillars and the aluminum magwell with the anarchy outdoors extended mag release that is not made out of metal. I have several anarchy mags with the mag extensions and the short action custom extra mag holder. Pretty messy weather this week.
@PursuitofAccuracy
Жыл бұрын
@@stevereese6488 having seen both id steer you towards the element 4.0. The pdc custom is a good chassis but the finish is just very rough.
@stevereese6488
Жыл бұрын
@@PursuitofAccuracy well, pretty much all the aluminum chassis out there are from a few months to 7 month wait, so I narrowed it down between the krg bravo and the mdt xrs. I went with the xrs and added the weight and their 10.25 inch mlock arca rail, the weight is about a 2 month backorder but the rest should ship this week. Maybe one day in the future I will look into the aluminum chassis again but I think this will do fine for now and I think I can adjust it short enough on lop for my grandsons.
@thangcung1993
2 жыл бұрын
Hey josh how it take for the shipping?Thanks❤️
@randomidiot8142
2 жыл бұрын
Cold weather does funny things. Yeah, it makes the lube cold and your latest project breaks your heart when it doesn't feed. Or it drops a shot low after a 30 minute wait for a pest to peak it's head out of a hole..
@hangarpilot1895
2 жыл бұрын
Is the aftermarket aluminum chassis any better than the stock one from CZ?
@hotchihuahua1546
2 жыл бұрын
What power on your scope do you find yourself using at 50 & 100 yards ?
@OrangesmokeM7
2 жыл бұрын
👍
@visiter127
2 жыл бұрын
What size target do u shoot at 400 and 500 with this please
@lw8447
2 жыл бұрын
What scope ?
@arkimedelab
2 жыл бұрын
Just seeing these videos I suffer too much. from me in Italy this kit costs 1900 euros while you pay $ 500 for it. is there a good soul who can send it to me ??? thank you
@brianschmunk9490
2 жыл бұрын
absoultily no offence to rimfire, their cheap to shoot and had have fun with, but my 338 lupia will??????? sory bout spelling, lernt to shoot before spell
@randomidiot8142
2 жыл бұрын
338 Lapua is overpriced and overhyped. Might as well shoot a 50 bmg for the money you're spending. More bang for the buck. Lol.
Пікірлер: 41