Peter you are the perfectionist every time and a real pleasure to see your work
@TRXLab
2 жыл бұрын
Thank you
@BoB4jjjjs
2 жыл бұрын
Excellent work Peter. I like a radio that is not covered in surface-mount components. There is something to look at and admire in a radio like that. These days it is like grains of rice scattered over the board! A big processor, a few chips, display drivers, well, you know what I mean. Nice work, repairing the radio. Clever, using a bulb as a fuse to protect the front end. As always, I find your videos very entertaining and educational. 👍 😎 I like your work, very thorough and precise, a joy to watch a professional at work :-))
@TRXLab
2 жыл бұрын
Thanks for feed back
@waynethompson8416
2 жыл бұрын
That little bulb did its job!!! Saved the more expensive parts from disaster. Of course, it was a pain in the butt to replace, but it was worth it.
@TRXLab
2 жыл бұрын
So it is :-)
@ve99online
2 жыл бұрын
Hallo Peter, wie immer eine professionelle und nachhaltige Reparatur. Ich schaue immer gerne über deine Schulter und kann sehr gut beurteilen wieviel Arbeit in den Videos steckt. Vielen Dank! 73, DG3JA
@TRXLab
2 жыл бұрын
Vielen Dank Jörg! Freue mich das dir meine Videos gefallen und es ist gut einen wirklich sachkundigen Fachmann hier zu haben! Alles Gut 73
@davidniemi4051
2 жыл бұрын
Thanks, Another great repair video Peter. Love the little "oops" at around 24 min in, "do you know where to put these back in?". Excellent reminder for all of us to take pictures or video!
@TRXLab
2 жыл бұрын
LOL yes if you forget it you are really lost..
@Joe_HamRadioGuy
2 жыл бұрын
Hi Peter, it's great to see another video. Looks like that customer was very lucky but definitely a lot of work to just switch a bulb for sure lol Thank you for sharing always look forward to your videos. 73
@TRXLab
2 жыл бұрын
Thanks for feed back
@onurbespinar
2 жыл бұрын
Lift up the board? I will literally burn down that radio :) Thank you Peter. As a new ham operator i learn a lot from you.
@TRXLab
2 жыл бұрын
Thanks glad that you liked it..
@OleF112
2 жыл бұрын
Dear Peter, nice too see you back here on our playground! Nice fix once again, one oft the best sold TRX worldwide saved..73 de Olaf. Ich freu mich, Peter. 73 de Olaf
@TRXLab
2 жыл бұрын
Thank you Olaf. Yes we love our playground :-) Take care.
@M5AXA
2 жыл бұрын
Loving the cheerful start to your video's. Have a great weekend. De M5AXA
@TRXLab
2 жыл бұрын
Thank you
@philkennedy342
2 жыл бұрын
It’s a pleasure to watch 👍👍👍
@TRXLab
2 жыл бұрын
Thank you
@Pedro8k
2 жыл бұрын
I still have one of these from when I was first licenced unfortunately not working unless I can find a scrap one not that I need it but a shame really glad to see someone with skill and equipment still repairing these old radios
@TRXLab
2 жыл бұрын
yes it is a nice oldie
@bblod4896
2 жыл бұрын
Nice quick repair. Buddy from The Radio Shop has run across that issue before. Thanks for taking the time to produce the video.
@iw0hex
2 жыл бұрын
Hi Peter, during these day I repaired a Yaesu FT-767GX and I have seen on RF board the same lamp !!! I think it was very used in the past. Thanks for your video my friend and stay safe. 73s Pasquale IW0HEX
@TRXLab
2 жыл бұрын
Yes it was always used in those old rigs.. Thanks for stepping by and all the best and stay safe my friend 73
@emylrmm
2 жыл бұрын
Great advice about taking a photo or two BEFORE removing the connectors on all those wire harnesses!
@lylewatts6370
2 жыл бұрын
Another great video Peter, Had the same problem on a FT-101 and the bulb was on the rear of the radio. Very easy to change. Thanks for the info.
@TRXLab
2 жыл бұрын
Glad you liked it
@silvanomoreno6950
2 жыл бұрын
Excellent video showing the trouble, this time was very easy, the same work I make on 757GXII but less tilt up the PCB, but changing the minilamp ( 8 volt - 0,1 Amp ) directly from the top of PCB. Very often I found this trouble in Yaesu radio due to excessive RF or static voltages on antenna System. 73’s Silvano I1WSM
@berndb.5097
2 жыл бұрын
"Mostly used in FM" 🤣 maybe 27.xxx MHz😉 The user group for this radio has changed from HAM to CB operators. Thanks for the nice video. 73 de Bernd
@TRXLab
2 жыл бұрын
sometimes yes :-)
@stevemercure902
2 жыл бұрын
A very informative video, thank you! I had to learn that lesson on taking pictures before pulling connectors the hard way.
@dennisqwertyuiop
2 жыл бұрын
great work,lots of work for bulb replacement
@TRXLab
2 жыл бұрын
Thank you Dennis!
@enigmarbs2886
2 жыл бұрын
Hallo Peter, wieder was von Dir gelernt. Alte Geräte haben immer noch ihren Wert! Danke für die super Erklärung in allen Deinen Reparaturvideos. 73 de Stefan DG4RBS
@TheMaddogronh
2 жыл бұрын
Thanks for another fine video to go with my morning coffee !!!
@TRXLab
2 жыл бұрын
glad that you liked it
@dickvancampen3318
2 жыл бұрын
Very nice lesson to be learned
@TRXLab
2 жыл бұрын
Glad that you liked it
@MrKelendros
2 жыл бұрын
Hi Peter, a pleasure seeing a new video from you. An excelent job as always. Thx for sharing with us a bit of knowledge )
@TRXLab
2 жыл бұрын
Thank you
@tlrptg
2 жыл бұрын
these vintage radios are 100 times better made than today's radios. they were made when designers thought about the users. Transmit into the radio with 100 watts? Lightning strikes the antenna? no problem, the user has to change a bulb worth 80 cents. Back on the air in one hour, maximum. The new generation of transceivers? they go faulty just by the position of the Sun and the planets, or if a bigger bird sits on the antenna. Of course, they can be fixed by changing a bunch of SMD semiconductors and passives, or by swapping out the whole board. The cost? well... let's not talk about the cost.
@TRXLab
2 жыл бұрын
perfect
@andybonneau9209
2 жыл бұрын
Great repair Peter. Wish I had some like you near me for repairs.
@TRXLab
2 жыл бұрын
Thank you
@Derrick6162
2 жыл бұрын
Enjoyed the repair. Thank you for sharing. ⚡
@TRXLab
2 жыл бұрын
Thank you
@johngulliver6151
2 жыл бұрын
Another very informative video from you peter, thanks for posting
@TRXLab
2 жыл бұрын
Thanks for watching
@peterwaine923
7 ай бұрын
That repair on the over voltage 7100 was brilliant... 73 De Peter M0JFK.
@billnicholson2470
2 жыл бұрын
Been wondering where you went. Glad you are ok. Great video. Thanks Peter.
@TRXLab
2 жыл бұрын
No worries I'm always here :-)
@regularuser492
2 жыл бұрын
Jetzt hab ich was zu tun, diese neue video von Peter anzuschauen ! Danke dir !
@TRXLab
2 жыл бұрын
Hoffe es hat dir gefallen :-)
@regularuser492
2 жыл бұрын
@@TRXLab hundertprozentig, Marke Peter garantiert dafur ! ;-)
@a2phil
2 жыл бұрын
If I may offer a suggestion, whenever I have to take wire harnesses apart, I label them with a piece of masking tape, even if you're just using numbers, it helps!! On reassembly, just reverse order!
@theteagues6792
2 жыл бұрын
Thank you Peter.. I have a very similar FT-757 II and wondered how well the bulb protected the Rx circuitry.. Knew it would open on a major spike, but was unaware of it progressively increasing resistance / protection as it heats up above normal current / signal levels.. Cool! Good job Yaesu! And thank you for the explanation.. Forgive me for a couple comments.. - although it might not be considered good practice, if you had clipped the leads off the old bulb, and soldered the new bulb to the old leads, you might have avoided heating the PC board & having to flip it.. just a thought.. - looking closely at the underside of the PC board, about 21:51, it seems there might be at least two other cracked solder joints on through holes & one end of a surface mount that might have benefitted from a reheat while you were there.. Thanks again.. Dennis
@TRXLab
2 жыл бұрын
No problems with comments...Yes clipping might avoid open solder joints but you never know. I always check those jobs to be sure all is fine... at 21:51 must be a reflection...
@michaelclutton8446
2 жыл бұрын
Thanks Peter, nice work as always
@TRXLab
2 жыл бұрын
Thank you Michael.
@extreme978
2 жыл бұрын
So glad to see you again!! I was afraid you had quit again. please keep the good videos coming!
@TRXLab
2 жыл бұрын
Glad that you liked my videos..
@jurgentraude4365
2 жыл бұрын
Nice to see you back Peter, thanks!
@kevingray707
2 жыл бұрын
Thanks for the video. Sure hope the next one is right away. Look everyday.
@TKomoski
2 жыл бұрын
Saturdays only
@TRXLab
2 жыл бұрын
Thanks for watching
@johnathanasiou9284
2 жыл бұрын
Fantastic video Peter & thanks for sharing. Awesome troubleshooting approach. For us hams who can't afford such a good radio test set I would love in a future video if you could explore alternative, cheaper options. I'm always learning something useful in each video you post. Huge apologies, I accidentally hit the dislike in a rush but all good now. God bless you always Peter!. Bis bald & tschuss
@TRXLab
2 жыл бұрын
Yes you are right I should show how to do nearly the same with cheaper devices. Hope I find some time...
@BoB4jjjjs
2 жыл бұрын
You can change it to the thumbs up button, but the thumbs down button works just as well for KZitem :-))
@shadetreetrader1135
2 жыл бұрын
Peter you're back!! Missed your videos.
@user-ro1re2ox2l
Жыл бұрын
Good work Peter
@RGB06084
2 жыл бұрын
Thanks Peter! Great work!
@TRXLab
2 жыл бұрын
Thank you
@alexanderm7316
2 жыл бұрын
Good job and nice video.
@TRXLab
2 жыл бұрын
Thank you
@hancecrawford
2 жыл бұрын
Peter have missed your videos have you been keeping well that little lamp could it not substituted by a Zener diode were over power could to ground nice little old radio and you have given it more life again well done :)
@TRXLab
2 жыл бұрын
Thank you John!
@chinsta00
2 жыл бұрын
There is a TVS transorb diode already in the circuit. You can see it in the schematic diagram, Peter's pointer is pointing exactly at it at 8:08
@dl7majstefan753
2 жыл бұрын
Hallo Peter, direkt hinter der Anschlußbuchse "RX Ant" ist eine Schutzdiode D1 (Suppressor oder Transzorb?) parallel zum Eingang. Ist die nicht zerstört?
@TRXLab
2 жыл бұрын
Hallo Stefan, du meinst bestimmt die D116 der Transidient Suppressor. Dieses Bauteil ist noch nicht gefährdet wenn ca. 15 Watt direkt in das Gerät gelangen. Bei 15 Watt haben wir ca. 27 Volt und da passiert noch nicht wirklich was mit Bauteilen die eine viel höhere Spannung "abfangen" sollen....
@dl7majstefan753
2 жыл бұрын
@@TRXLab Hallo Peter, OK, Danke! Wusste nicht, dass das "nur" 15W waren. D1 = D116 - tja meine Augen ... hi.
@matt9c1
2 жыл бұрын
Great video Peter !! Well done !
@TRXLab
2 жыл бұрын
Thanks
@cornelishummel7987
2 жыл бұрын
hi peter have a nice day greetz from holland
@TRXLab
2 жыл бұрын
Have a nice day too!!
@miltonball2591
2 жыл бұрын
Nice job peter
@TRXLab
2 жыл бұрын
Thanks
@wkjagt
6 ай бұрын
I'm probably seeing it wrong, but the blue electrolytic capacitor right next to the bulb looks to have a hole in the side. Visible in the video at around 17:25.
@dondonaldson1684
6 ай бұрын
Easy fix, except for gaining access to the solder side of the board. -118dBm for 10 dB SINAD on 40m? Pretty darn good.
@petenikolic5244
2 жыл бұрын
Hi Peter did you spot the other fractured solder joint diagnoly right and down by the othre small chip cap .
@TRXLab
2 жыл бұрын
Yes I have seen it while I was editing the vice but I'm sure that was a refection....
@petenikolic5244
2 жыл бұрын
@@TRXLab hope so i have seen many like that i hate solder like that i will go over a complete board if i find 2 or more bad joints .
@eugeneleman4933
7 ай бұрын
Hello. my 40? year old 757 that is stuck in transmit, any ideas? Only power is connected, no mike. Eugene, WA6JZN
@jasonbordley7137
Ай бұрын
Can you tell me what is happening on my 757 gx I am only getting an orange on air light nothing else
@sveinfarstad3897
2 жыл бұрын
Got an 747GX in working order, this plastic box.
@TRXLab
2 жыл бұрын
still a good radio...
@sveinfarstad3897
2 жыл бұрын
@@TRXLab It works good and not seen the golden screwdriver. Good audio on it, thanks for reply Peter, have nice day.
@TKomoski
2 жыл бұрын
Peter what are those bent row of jumper wires for? At 12:19 there are 7 of them
@TRXLab
2 жыл бұрын
To my knowledge those jumpers are often used to be able to connect test equipment...
@TKomoski
2 жыл бұрын
@@TRXLab That's what I thought Peter, but you never know with radio's. *Cheers* *73*
@DK5ONV
2 жыл бұрын
👍👍👍🙋♂
@hamelmer4827
2 жыл бұрын
great video peter, just wondering? Where did you learn such good English?
@TRXLab
2 жыл бұрын
Oh thank you normally I get criticised for my bad English
@BoB4jjjjs
2 жыл бұрын
@@TRXLab I understand you perfectly well. You on the other hand might struggle with my accent from Doric part of North East Scotland :-) Your English is better than my English 😎
@hans429
2 жыл бұрын
If ya dont hear, switch the radio on...if you still dont hear...switch ya ears on...
@unknownerror542
2 жыл бұрын
@time frame 21:47 it appears there's another cold solder joint on the right hand side of the frame, left of the surface mount resistor/capacitor.
@unknownerror542
2 жыл бұрын
Ah I just saw another response where you believe it's a reflection.. I thought about that, wasn't sure. Do you think it was a reflection from that resistor or cap right beside it?
@wendelljackson1488
2 жыл бұрын
Are such replacement bulbs readily available today?
@TRXLab
2 жыл бұрын
you need to search for it
@mattaitchey4917
Жыл бұрын
hello from australia I am fixing this bulb with my radio :) thankyou for the information. My donor radio bulb looks very good but is 8 ohms I was expecting closer to 0 do you think 8 ohms is good? I would like to buy a new bulb however i cannot find 6-8v 100mah locally
@TRXLab
Жыл бұрын
Use white diffuse LED's, 3600 Kelvin types instead
@mattaitchey4917
Жыл бұрын
@@TRXLabare you sure? this is for the Rx protection fuse bulb
@TRXLab
Жыл бұрын
@@mattaitchey4917 Sorry, me bad off course not the LED for the front end protection...
@a2phil
2 жыл бұрын
I was just thinking, if that bulb is such a PITA to replace, is it also pure unobtanium?
@TRXLab
2 жыл бұрын
What is PITA and what is unobtanium?
@johnb1642
2 жыл бұрын
Pain in the ass. Unobtainable.
@maninthevan53
2 жыл бұрын
is that SMD I just saw in this old radio?
@TRXLab
2 жыл бұрын
No that is THC
@Bass.Player
2 жыл бұрын
That pin being loose makes you wonder if this radio ever had any intermittent problems. It's actually a good thing the fuse blew so the pin could be fixed...K5AZE
@TRXLab
2 жыл бұрын
yes that is true...
@chinsta00
2 жыл бұрын
I have a FT-757GXII myself. Biggest job so far was to remove the seized rotary encoder for dismantling and lubrication. Removing the encoder required disconnecting all those cables from the boards, before finally separating the front panel from the chassis. So I know the pain! While the covers were off, I also took the opportunity to perform one of Peter's modifications, using a PTC thermistor to temperature stabilise the master oscillator kzitem.info/news/bejne/rK6MsJquoqlljYY Such stability is probably overkill for HF SSB, but the temperature drift became problematic when using FT8.
@TRXLab
2 жыл бұрын
Thanks for feed back
@user-cx6zp8lp4r
2 жыл бұрын
Thank you Peter! Volodymyr UR5NET
@jozefbezan2501
Жыл бұрын
Danke für das tolle Video.Ich habe die gleiche Station,nur 10m,28MHz funktionirt nicht,alles andere in Ordnung.Was denken Sie,warum 10m(28MHz) nicht funktionirt .ES ist eine meine erste(1989 Lizenz)wertvollen Stationen.😊😊😊.73,de Jozef OE1CJG,(S56CJG).
@TRXLab
Жыл бұрын
Hallo Jozef, aus der Ferne nicht einfach zu sagen, aber wenn nur 1 Band nicht funktioniert, könnte es etwas in den Filterbänken sein.
Пікірлер: 126