Strange I posted a comment last night disappeared , so here goes. 1/Depending on year Eliminators have differing piston seals 2/Theoben piston seals very difficult to find , many owners reduced to making them or having them made. 3/Gas rams burn out piston seals faster than steel spring guns 4/Your Eliminator may well be over pumped as is, dropping the pressure will bring up the power. 5/Remove dust cap screw in rear of cylinder. this reveals aircraft grade Schrader valve 6/a standard car tyre pressure bleeding tool will undo valve and bleed air. 7/cylinder can be refilled from a standard high pressure pump bicycle fork or PCP or divers air cylinder. 8/you will need an adapter 9/ optimal pressure for ram varies depending on type early piston types require a low pressure around 750 psi if memory serves later HE types are higher pressured, ram pressure also caliber related. 10/ worth checking condition of barrel pivot bolt these can suffer if worn replace.
@razor1962
Жыл бұрын
Great info, David. Thanks so much. I will refer to this as I get more involved with the rifle. Much appreciated, my friend.
@davidprocter3578
Жыл бұрын
.@@razor1962 a firm in devon makes adapters not expensive.old piston seals can look good but be rubbish. pressurize with nitrogen if pos if not dry air. take pressure up slowly my own theoben only takes five strokes on the stirrup pump to overfill.
@razor1962
Жыл бұрын
@davidprocter3578 Good to know, David. Thank you so much.
@stillair1
Жыл бұрын
Thanks for the video, having owned an eliminator in .20 and .22, rule of thumb is to run them on 2/3 throttle and adjust the pressure with the most accurate pellet. Once you charge up to full pressure on the ram they can become harsh to shoot. You also risk the possibility of burning the piston head out. There are two adaptors for the pump which suite different models of Theobens. If you can acquire a dampa mount that will help the scope stay together. Early units used a bolted on theoben specific dampa . Some later model of theobens had a 11mm grooved action and could use the sportsmatch dampa .Both were made by sportsmatch. Back in the day being local to the factory my wallet was emptied as different models came out.🙂
@razor1962
Жыл бұрын
Excellent information, my friend! Thanks so much. I'm wondering what mount is on my example it's a solid mount, but it's too low based upon the height of the comb of the stock. I'd love to find something as nice only in a "high" configuration. That would make the rifle much more comfortable to shoot. Thanks again for a very informative comment.
@stillair1
Жыл бұрын
Hi, having looked at the rifle on full screen size that looks like the proprietary Theoben dampa mount fitted.(check by applying pressure to the rear of the mount and it should move a smidge as the rubber bushes in the mount compress. Theoben did offer half moon ring inserts and longer top screws at one time. I recall Theoben changed the piston head configuration at one time from poly to o ring to stop poly piston heads being burnt out.@@razor1962
@stillair1
Жыл бұрын
Hi a short term fix might help is to move the scope forward in the rings as its not central in the mount currently.
@jager8817
Жыл бұрын
Great video, as always. The power on the Theobens is adjusted by removing a screw on the rear of the cylinder. ( Exactly the same as you would with a Weihrauch HW90, fitted with the Theoben gas ram system). This gives you access to a small schrader valve. With the correct adapter, you can increase the air pressure in the gas ram with a stirrup pump. Such as one you would use for a pcp air rifle. The gun shop where I work in the UK, is pretty close to the old Theoben factory, & their employees often came in for pellets etc. One told me you could even recharge the gas ram with a bicycle pump, though it’s not something I’ve tried. I use the proper Slim Jim pump myself. Though you should never use a dive bottle, or an electric pcp pump, they deliver far too much pressure for a gas ram. Thanks again for a great video.
@razor1962
Жыл бұрын
Great info, my friend. Thanks so much for sharing.
@peteralexben
Жыл бұрын
maybe a hp bicycle pump thats used for race bike tires could work 10 bar tires , because the low pressure ram is somewhere between 20 to 30 bar filled , a hatsan carnivore 135 gas ram goes up to 160 bar , there you need a pcp hand pump ,because you control the pressure better than filling from a botlle .
@bernardvanderveen7656
9 ай бұрын
Mine eli .25 do 29fpe on 65 bar ram pressure with ftt 20 grain pellets. If power is low check ram pressure If thats ok replace piston seals
@razor1962
9 ай бұрын
@@bernardvanderveen7656 Thank you, Bernard.
@SedEdwards
Жыл бұрын
Wow, 25 ft lbs and pretty accurate. The spread is a bit high but I'm sure with a service you'd sort that out, it's got a nice stock as well. I'm from Wales in the UK 🇬🇧 were we are only allowed 12 ft lbs without a licence so I'd love that much power. Keep up the good work ✌️😎
@razor1962
Жыл бұрын
Thanks very much, my friend.
@whiskeykilmer1866
Жыл бұрын
That's a beautiful rifle. A forever keeper for sure.
@razor1962
Жыл бұрын
It is indeed. Thanks so much for watching, my friend.
@willytheekid
Жыл бұрын
So great to see a big bore Kevin 🥰 I was actually thinking 620+fps @ 25+FPE seems to be about right for a .25 (my .30 carnivore only does around 530+FPS @ 30-34FPE) ...but as your gong can testify too(Damn that hit hard!😂), its not "speed" that makes the big bores the best long range hard hitters! - its the Kinetic mass!! (And they retain energy soooo much better than the small bore's, so they slow down much less over distance, which equals more accuracy and more whack!!) Biggest tip I can share from my big bore experiance is the type of hold used...I honestly just can't get any type of decent groups if I use a standard artillery hold, instead I have to use a firm-ish grip and pull the rifle back into the shoulder, then my shot groups improve dramatically! ...But arent they just a wonderful "work out!" (Very wise of you to switch arms mate...keep that rotator away from that beast till your all fixed up💪) Thanks for sharing another great rifle and video with us Kevin Kia kaha ❤
@razor1962
Жыл бұрын
Great info, my friend. Thanks so much for sharing it. This will be the gun that comes out when I just want to demolish stuff.
@scottrobertson9452
Жыл бұрын
Kevin, I shot one of these that was at full power, at a airgun gathering in Penna. years ago. Was hitting a galvanized garbage can lid at 100 yards. I think with some tweaking, it can be brought up to full power and a better scope setup. Remember, the Webley Patroit was advertised at 775fps, so this should do around 815fps. My 2003 Beeman catalog has it rated at that. The trade off for me is the insane engineering that went into this rifle, the stock and the bluing. ScottinPa.
@razor1962
Жыл бұрын
It really is an elegant rifle. From what the comments are saying, lighter pellets may be just what the Dr ordered. Thanks as always, Scott.
@tqmfun8205
8 ай бұрын
Was exercising my .22 Theoben Eliminator today and have the Slim Jim pump. When I got it I was hitting 836 fps @ 22 fp. I pumped it up to 1000 psi and now consistently getting 880 fps @ 25 fp. Again like you, it’s a workout cocking this monster. I’m using 14.3 gr for above data.
@razor1962
8 ай бұрын
Hello, and thanks for watching. I need to get my hands on a pump for my Eliminator. It would be very interesting to experiment with different pressure settings.
@tqmfun8205
8 ай бұрын
I ordered my pump kit from Bestfittings in UK. It gives you the flexibility to go up or down in pressure to find a sweet spot. Also, if you do your own work, gives you the flexibility to bleed it all the way down and disassemble to check your crown.
@stevepowell3475
Жыл бұрын
Great Video. The Eliminators are well engineered Rifles, and yours looks a beauty. I think you probably need to do a bit of pellet testing to see what suits your barrel. I've got an HW 90 in .25 flavour but 12 ft lbs, which loves H&N Field Target Trophy's (20.06 gr) Keep up the great work... your videos are my early morning Sunday watch prior to going to my gun Club..
@razor1962
Жыл бұрын
That's great to hear, Steve. So glad that you're enjoying the channel
@davidcarter7310
Жыл бұрын
Kevin i had my Air Arms S410 PCP tuned by Ben Taylor and son Ben was half of Theoben Air rifle company he's a excellent engineer and inventor they made excellent rifle's so you have a good one there Thanks
@razor1962
Жыл бұрын
Thanks, David. It's truly a beautiful air rifle. Thanks as always, my friend.
@trevorpollock3024
Жыл бұрын
I owned one of these in .25 caliber about 23 years ago! It was called the Beeman Crow Magnum,same gun just bought into Australia from the USA by Beeman. I sold it about 15 years ago for $1200.00 after taking heaps of rabbits.Regret selling it as it was a beautifully made rifle,but very heavy. Last one I seen sold in Australia went for $2000.00 about 1 year ago. Very rare to see these now. Would definitely keep it though.
@razor1962
Жыл бұрын
Thank Trevor. I do plan on hanging on to this one. Such a well-made and beautiful rifle. Thanks so much for watching, my friend.
@iwanvanderhut4159
Жыл бұрын
I went to the Theoben factory in the late 80's and it was a incredible place. Great review.
@razor1962
Жыл бұрын
Thanks, Iwan. That must've been something to see. I'd love to have done that. Thanks as always, my friend.
@hauk65000
Жыл бұрын
It's a very nice result, very nice shooting. Must also say, a pleasant presenter who informs correctly and calmly. The best in this field so far 👏🤗
@razor1962
Жыл бұрын
Well, thank you so much. I am so glad to know that you're enjoying the channel. Thanks for watching, my friend.
@DomRivers67
Жыл бұрын
I believe it's a Lothar barrel, and they are very fond of JSB in my experience You'll get better power from a lighter pellet (in all spring/ram guns...the opposite to pneumatic/pcp) You'll be in the 700's and half that group with a lighter JSB. Theobens were always know for heavy cocking...but it's a hunter not a plinker....you only need to do it 3 times for 3 bunnies :-)
@razor1962
Жыл бұрын
Thanks, Dom. Very sound advice. Thanks so much for your comments. I very much appreciate your viewership, my friend.
@kris2435
Жыл бұрын
Thanks for sharing, look forward to video no 2 with this rifle 👍
@razor1962
Жыл бұрын
Thanks Kris! Stay tuned...
@arcticairgunner
Жыл бұрын
Outstanding video! Very happy I found your channel. 👍
@razor1962
Жыл бұрын
Thanks so much, and thanks for watching, my friend.
@neiledwards8931
7 ай бұрын
Kevin, the Theoben rifles are excellent the late. John Darling used one plus his HW80 , and they are very accurate and at range even in .25 cal all that is needed is a scope with a verticle reticle with lots of mil-dots to help out the trajectory of .25 , also a lighter pellet will help , nice video Cheers I am in Wales 🇬🇧 UK.
@razor1962
7 ай бұрын
Thanks, Neil, I'm finding your advice on lighter pellets to be spot on. As always, thanks for watching, my friend.
@springpistonriflefeverlone9611
Жыл бұрын
I'm impressed 🙂👍 25 FPE is good energy. I had a Hatsan 125 25 caliber that produced 34 FPE.
@razor1962
Жыл бұрын
Pushing the limits of the design. Interesting stuff. 34 is about as far as you can go with a gun of reasonable proportions.
@springpistonriflefeverlone9611
Жыл бұрын
@@razor1962It was a hammer 🔨. Looking to get one in 22.👍
@tonythomas9885
Жыл бұрын
What a lovely gun. If I was marooned on a desert island I would want that air rifle...and a couple of million pellets of course! Regards
@razor1962
Жыл бұрын
It'd be a good choice, Tony. Great Iguana gun, for sure. 🤣
@thomasbeavon6485
Жыл бұрын
It rang that bell properly👍
@razor1962
Жыл бұрын
Yes, it certainly doesn't disappoint. Thanks for watching, my friend.
@airgunnostalgia4210
Жыл бұрын
Gorgeous gun with some serious power! Thanks for sharing!!
@razor1962
Жыл бұрын
Thanks for watching, my friend.
@JohnVentarino-ey5ln
Жыл бұрын
H&N makes a 20 grain pellet in 25 caliber they will definately be at 700 plus feet per second.
@razor1962
Жыл бұрын
Thanks, John. I'll give them a try.
@junglie
Жыл бұрын
@@razor1962 The feild target trophys in .25 are abut 21 gn .
@paultowns9880
Жыл бұрын
Great video Kevin. The eliminator certainly rang that bell!
@razor1962
Жыл бұрын
Thanks, Paul. She certainly packs a punch.
@roberttaylor6075
Жыл бұрын
Kevin there is a guy over here in the UK doing replacement mounts for that rail. He is doing mounts for 30mm scopes aswell. He is on Facebook on the theoben site can't remember exactly which site but he is on one of them. They where known for destroying scopes I am pretty sure they used a twin o-ring set up aswell on the piston, it may be down a bit on power the one's I used to use where around the 28ftlb mark and after plinking for a few hour's your arm had a good workout. I don't know if the later one's used the parachute seal or if they where all o-ring setups.
@razor1962
Жыл бұрын
Great info, Robert! I'll look into those mounts. I can't thank you enough for the tip. Always a pleasure, my friend.
@roberttaylor6075
Жыл бұрын
@razor1962 I think yours will have the later piston seal, as it has the better trigger, the earlier one's had a webley type trigger and the later one's had the gamo trigger which was alot better in my opinion.
@razor1962
Жыл бұрын
@roberttaylor6075 I have no complaints with this trigger other than wishing that the 1st stage was a little lighter. Overall, a very nice rifle.
@davidprocter3578
Жыл бұрын
Rob the gamo units were only fitted to the rapid sevens. the gamo style units fitted to their other guns was I believe designed by Ivan Hancock. and was more akin to the quatro units Ivan designed for the Tomahawk and longbow. it was very remenicient of the gamo unit due to the horrid stiff safety catch sat gamo style in front of the trigger proper.@@roberttaylor6075
@peterconnor4193
8 ай бұрын
I bought a hw90k around 1998 I think, because the theoben was to expensive for me back then , still have the weihrauch, it's been superb
@razor1962
8 ай бұрын
Fantastic rifle! Thanks for watching.
@mark70s29
Жыл бұрын
Im in the UK. Theoben are no longer making rifles,to my knowledge, back in the day i always lusted after one! I liked the little Fenman. Never liked the fixed scope rings. They did later do one called The Evolution with dove tail. A little cheaper but still more than Air Arms and Weighrauch. Weighrauch made a rifle called the HW90 which had the theoben gas strut but an odd trigger not as good as the Rekord though IMO. I retrofitted a theoben gas ram kit into my BSA Supersport.22 very snappy lock time and smooth cocking.
@razor1962
Жыл бұрын
Hi Mark. I really like the feel of the gas ram rifles. I'd love to get my hands on a Fenman one day. I'm a little put off by the limitations resulting from the scope mount myself. Thanks so much for watching, my friend.
@earleysamantha
9 ай бұрын
Had a sirocco classic carbine with a venom short silencer on it,beutifull rifle ,and a hw 90 gas ram and just got a bad lightnig xl se,all seem to have the same firing cycle with the gas ram just have to get used to it 😉
@firecook4848
7 ай бұрын
to be honest that rifle is a piece of history there, theoben were in the day the best money could buy in the uk, for springers that is, i would love for you to find a webely patriot to do a good compare , i would rather the 22 in these guns but you get what you get, my friend has a theoben fenman lovely little rifle, you can also get the scirocco as well, look out for these they might become heirlooms.
@razor1962
7 ай бұрын
Absolutely! These Theobens are treasures with undeniable quality. I've got my eye out for anything from Theoben. Thanks so much for watching.
@gibstera5580
Жыл бұрын
Great video. Thank you for sharing
@razor1962
Жыл бұрын
Thank you, my friend.
@nilslarson7532
9 ай бұрын
fun and springer-gas ram challenge. reminds of the HW90, a real work out.
@razor1962
9 ай бұрын
A workout indeed. Amazingly smooth for a rifle making as much lower as it does.
@WalnutandSteel
Жыл бұрын
nice hunk of lead hitting that gong!
@razor1962
Жыл бұрын
I know. You should hear it in person. 🤣🤣🤣
@davidinghram2494
Жыл бұрын
If you hit a squirrel in the head with that hammer, it`s gonna rip it right off the limb. A very nice rifle, congrats for finding it!
@razor1962
Жыл бұрын
Thanks, David. They don't call it the Eliminator for nothing....🤣
@OceanTruth
Жыл бұрын
It looks and sounds like a beast of a rifle! You shoot it well too. I’m not sure I could handle something like that, but it must be nice to have a thumper like that in the collection. Thanks for showing us an interesting rifle!
@razor1962
Жыл бұрын
Thanks as always, my friend.
@regsparkes6507
Жыл бұрын
I've watched 'Squirrel Hunter ( England ) using a Theoben rifle, when trying to rid the forests of those darn grey squirrels, he's sure does have good accuracy with his rifle, although his is not a 25 cal. :) This 'Eliminator' model is a tad more than this old shoulder will enjoy shooting I can tell you, but in the video your target shooting was as accurate as need be for my shooting Kevin.. Nice one.
@razor1962
Жыл бұрын
Thanks so much Reg. Always a pleasure, my friend.
@marksanderson1332
Жыл бұрын
My Theoben SLR98 was only doing 9.6ftlbs when I got it. Only put 1pump in with a stirrup pump & it went up to 16 ftlbs. Had sit tapping the pin in the middle of the valve to get it back below the UK legal limit of 12 ftlbs. So you don't need much effort to pump it back up to the advertised 28 ftlbs.
@razor1962
Жыл бұрын
Thanks, Mark. Good info. Much appreciated.
@marcmyers1465
Жыл бұрын
@@razor1962SFAIK: You can make a simple shredder valve adapter for a PCP pump. 🤷🏼♂️
@marcmyers1465
Жыл бұрын
EDIT: Schrader Valve ! 🤦🏼♂️ God I hate Spallchuck !!! 🤬
@arcticairgunner
Жыл бұрын
You would have a magnificent career reading audio books. 👍
@vf19blue
9 ай бұрын
At full pressure, these are circa 35 ft/lbs (although I have heard the sweet spot is 27ish) With the 20 grain pellets, it should be around 850 fps. Seems like most .25 pellets are for PCP now, so finding something a little lighter is challenging.
@razor1962
9 ай бұрын
Yes, there does seem to be a shortage of lighter weight pellets in .25 Thanks for watching.
@bramster-b9v
5 ай бұрын
25 fpe sounds decent for a pellet in this weight class. Nevertheless, we are all looking for more muzzle velocity. Great vid.
@razor1962
5 ай бұрын
Thanks as always, my friend. I finally ordered some lighter pellets for the rifle. It'll be interesting to see how they perform.
@shanepitzer4126
Жыл бұрын
Nice shooting! Looks like a real nice rifle, thanks for sharing!
@razor1962
Жыл бұрын
Thanks Shane. Thanks so much for watching, my friend.
@Steve-Cross
Жыл бұрын
Great shooting, as always.
@razor1962
Жыл бұрын
Thanks Steve!
@markholmes7922
Жыл бұрын
Hi there i had one of these guns in a 22cal in the 80s i baught the a stirupump and adapter to pump it up. The recoil was so fears it broke every scope put on it and aventuality broke the stock these are great gun and well made i would leave well alone as regards to pumping it up if i had one today i would replace the gas ram with a spring hope this helps you i really do enjoy waching your videos keep up the good work. #mark holmes
@razor1962
Жыл бұрын
Thanks, Mark. You're probably right. I should leave well enough alone. I imagine that lighter pellets will make a difference. I sincerely appreciate your viewership, my friend.
@johnhauser4801
Жыл бұрын
Great looking wood. Thanks for shearing again. Hope to see ya next week.Hey Kevin, maybe if you shot a pcp for a few months your arm would be better....j/k...lol... 😍
@razor1962
Жыл бұрын
Hi John! Say, do you think that I could knock down one of those targets with my new Theoben? 🤣🤣🤣
@johnhauser4801
Жыл бұрын
🤣😅 uummm no... I already had to fix two target pattles from last match... Matter of fact....... I need your video to see who the bad guy is...@@razor1962
Oh, it's very powerful. It's capable of more than 30 ft/lbs. Thanks for watching.
@bernardvanderveen7656
Күн бұрын
Mine .22 set at 65bar ram pressure do around 28fpe. Use theH&N ftt pellets ore jsb 25 gr. The .25 version runs around 28-30fpe at 65 bar ram pressure. Its have a schradervalve in back of the action behind a screw. Im use a pcp pump with adapter to adjust ram pr
@benrobertson7855
Жыл бұрын
Hi,someone committed on a weberly patriot.had one 25 years ago,a real cannon of a air gun,right out to 150 m accurate enough to hit a magpie and kill. After 35+ air guns ,seen these for sale a couple of times but never thought the cost and long term parts were cool. I now have a hw 95 for larger pest ,but for accuracy get a fwb601 you can take the eye out of anything,they say only for target work but there’s no pests in my garden or orchard…. And that’s with the factory sight.the old story of accuracy over power…one shot ,you only get…..regards from nz.
@razor1962
Жыл бұрын
Thanks, Ben. You've owned some very nice air rifles. Thanks so much for watching, my friend.
@_stoatchaser
Жыл бұрын
I would be happy with 25 Foot pounds. More than double the allowed power in the UK for non firearms certificate rifles. A lighter pellet might up the fps a little. In any case a lovely looking rifle and nice content as always. My HW 95'is going feel quite sad when I next take it out in comparison
@razor1962
Жыл бұрын
Thanks, Darren. I'm certainly not displeased with the rifle. A lighter pellet may, in fact, up the energy as well. Thanks as always, my friend.
@armandogonzales9304
Жыл бұрын
I have been thinking about getting a .25cal Air Rifle.
@razor1962
Жыл бұрын
Not too many choices in.25 cal. springers. I believe that Hatsan offers one.
@peteralexben
Жыл бұрын
dont now if the rhino pellet is still available in .25 .but that was a 19 grain it was great in a hw 90 and 80 ,and the uk webley patriot
@razor1962
Жыл бұрын
Thanks, Peter. I'll keep an eye out for them.
@PeterAgostiniJdcap26
Жыл бұрын
Good shooting session .😎👍🏻
@razor1962
Жыл бұрын
Thanks, Peter. You can get in some shooting and a workout all at once...
@PeterAgostiniJdcap26
Жыл бұрын
@@razor1962 my Gamo bone collector is like that ! 💪
@briandelfino8863
Жыл бұрын
Make sure to try some 25.4's in that rifle. They are a standout in mine and many others' .25 springers.
@razor1962
Жыл бұрын
Thanks, Brian. Will do....
@WalnutandSteel
Жыл бұрын
Evening Buddy!
@razor1962
Жыл бұрын
Hey there Nibs!!!
@Strutingeagle
Жыл бұрын
I love the content of the video, but damn!!! Gona have to give up the man card If I listen to any more of the background music.
@razor1962
Жыл бұрын
Hey! What's wrong with the music? 😆 It's part of the laid-back vibe on the channel. Most folks seem to enjoy it. Check your man card at the door, please. 🤣 Thanks for watching, my friend.
@marcmyers1465
Жыл бұрын
I think you just need a .25 Webley Patriot... 😊 I wouldn't sweat the velocity. I assure you, you have more than enough energy to lob in sufficient .25 cal. luvvin anywhere on your property with absolute authority ! 😈 Probably deserves a good Sussing out though. 😉👍
@razor1962
Жыл бұрын
Almost snatched on up at the show, but it was pretty badly blemished in the grip section.
@marcmyers1465
Жыл бұрын
@@razor1962FTR: At 629 fps. appx. 4 mil dots holdover. 😉 or just down past the tip of the bottom post on the Hammer's slugger. 🤔
@peteralexben
Жыл бұрын
i think if its a first gen theoben ,its the same as the hw90 , 20 to 30 bar or so , later they added a high pressure gas ram like its common now , because of the asyer cocking little o rings dont now if that type is adjustable like a hatsan ram is , the fac eliminator should be 30 ftlbs or higher . not the most powerful springer anymore ,but a beautiful made gun
@razor1962
Жыл бұрын
That's what I thought, Peter. Still, 25 FPE is still pretty respectable. Overall, it's a very impressive rifle. Thanks as always, my friend.
@marcmyers1465
Жыл бұрын
@@razor1962I think this is highly likely, and honestly preferred for best characteristics... 🤷🏼♂️ More of a Blessing in disguise. 😉👍 I think pellet selection is the answer ? 🤔
@razor1962
Жыл бұрын
@@marcmyers1465 There's still a lot of pellets to try. I was surprised to see that group. I wasn't shooting that well with it before I turned the camera on.
@marcmyers1465
Жыл бұрын
@@razor1962Very curious what the BC is of those Hunter Extremes at 25 yards ? 🤔 They seem stable. 🤷🏼♂️
@JohnVentarino-ey5ln
Жыл бұрын
There 28 grain pellets and heavy if you use 25.39 grain JSB pellets i bet your FPS will be closer to 700.
@razor1962
Жыл бұрын
Thanks, John. I'm certain that a lighter pellet will bring up the velocity. From what I can gather, the rifle is capable of energies in excess of 30 ft/lbs. Currently, it's at 25. I was expecting it to be more based upon the amount of effort required to cock it. I can't imagine what the cocking effort will be if the pressure in the ram is increased. Thanks as always, my friend.
@mickchaganis6607
Жыл бұрын
I know you seemed disappointed with the pellet speed but the weight of it!!.......... A . 22LR rimfire is only a little heavier at 40 grains and travels at 1000 fps.
@razor1962
Жыл бұрын
I'm not really disappointed. I was more surprised due to the extreme force required to cock the rifle. I was expecting the rifle to be close to its maximum power output, which is in the 30 FPE range. As some have mentioned, a lighter pellet might be the answer. Thanks as always, Mick.
@mickchaganis6607
Жыл бұрын
@@razor1962 I've never cocked a gas ram rifle, I've heard it's a different feeling to a spring. In a couple of weeks time I should have an Anshutz 54 or similar, just waiting for my licence to come through 'finally'. I will put it through the chrono, be interesting to compare speed and ft pounds of a rimfire. 22 to a powerful air rifle. Always, good to do test ourself isn't it rather than Internet info.
@razor1962
Жыл бұрын
@@mickchaganis6607 Congratulations on the license and the new rifle that are on the way. That ought to be a rewarding rifle.
@mickchaganis6607
Жыл бұрын
@@razor1962 thank you Kevin.
@FrostiTheRoadman
Жыл бұрын
I think 28 ftlb was the nicest power for these to be and I bet if you use some lighter pellets say 21grain you might hit it. I reckon fat 33ftlb it would eat scopes lol.
@razor1962
Жыл бұрын
No doubt about that, my friend. I'll have to get my hands on some lighter pellets. Thanks for watching!
@jamesdenny4734
Жыл бұрын
Use a lighter grain pellet!?
@razor1962
Жыл бұрын
Yes, that has been suggested. It certainly won't hurt to try. Thanks for watching, Janes.
@junglie
Жыл бұрын
That's about average for the high power theobens Kevin, i prefer the HW90, easier to cock & better trigger.. Bit heavy for my taste though ,
@razor1962
Жыл бұрын
Thanks! 25 is still a lot of horsepower. I was told, however, that these guns were capable of well over 30 ft/lbs. I guess I'll enjoy it where it is then. It sure is fun to plink with it. I appreciate your input as always, my friend.
@junglie
Жыл бұрын
@@razor1962 The cocking effort would be higher as well , you don't want to strain your good arm Kevin too....Rare guns over here too think most went to the usa ,.Only seen the odd one in gunshops racks (usually at inflated price too.) Nice high comb stock on it though, seems more ergononic than the HW90 stock. . If you do have to work on it be carefull when tapping the schrader valve to depressurise it too hard will break the seals, as I found out when working on a pals old battered one, but it was probably due a new valve by then. the piston seal & internals were servicable though after many thousands of shots, they need a tablespoon ful of motor oil in the ram too . Shame your not neaarer i have a spare adapter to repressuris it, you can do it carefully with few pumps of a stirrup pump though.. got it to do that HW90 but fits most later theoben valves too.
Пікірлер: 143