This one video is the Bible of Stepper Motor. No other video can explain better. The animation is superb. On any question on Stepper Motor, I shall come back to this video. Thanks.
@geozaf3679
Ай бұрын
Φψ
@marcbaptista
8 жыл бұрын
Can I say this HAS to be one of the most comprehensive and detailed instruction I've come across. I'm an active animator/filmmaker (65 yrs old!) and I'm getting back into creating my own art projects involving Arduino/steppers. Your clip was absolutely wonderful, and has given me the necessary insight and momentum to get this going. 30 years ago I had a multi-axis stepper-motor driven animation rostrum. It was massive & ludicrously expensive then. Times and the costs have changed the game. I'm excited, and you've given me the fillip to work with steppers again! Thank you. I WILL view your subsequent video on how to drive the motors via Arduino. Thanks again.
@BStateham
8 жыл бұрын
That's awesome. I'd love to hear about your creations!
@MarkMichalowski
7 жыл бұрын
Clearly and straightforwardly explained, great visuals, no irritating, pointless background music - excellent work! Thanks Bret! :)
@garybooting_co_uk5866
7 жыл бұрын
This has to be by far the most comprehensive explanation of stepper motor driving that I have seen. Well presented and a wealth of information, thank you for taking the time to present this tutorial. I wish every tutorial was presented in such a detailed, yet simple, method.
@Tocsin-Bang
7 жыл бұрын
Having been in education for about 40 years, I have to say that this is one of the best technical KZitem presentations I've ever seen! Superb.
@haroldadelman1130
7 жыл бұрын
Wow! Thanks, you saved me the trouble of taking it apart! Seriously, I am a novice Arduino user, and I love the professionalism of your videos. I have a lot to learn, and I thank you for being a good hands-on teacher!
@rayguyon6563
6 жыл бұрын
Probably the clearest and most comprehensive tutorial I have ever seen. In a word, superb. Thank you.
@GetchaPull
9 жыл бұрын
This was just amazing. Thank you Sir.
@BStateham
9 жыл бұрын
You bet! Glad you liked it. I need to get time back on the bench to finish up my Raspberry Pi and Arduino vides for how to use them. Hope to get those done soon.
@visionstills3700
8 жыл бұрын
Hi Bret, I had to watch this video twice for it to sink in and so glad I did. I'm getting incredible torque from this little stepper (same hardware setup as you show) in full step mode. You have a way of explaining complex subjects that makes it simple to understand. Thank you. My highest KZitem compliment, Subscribed.
@BStateham
8 жыл бұрын
Glad it helped you out!
@TheJuliusCo
7 жыл бұрын
Amazing, most videos just focus on the operation of the Arduino's Sketch and the proper code, but fully understanding a project like this is equally valuable, I'm a physicist trying to get into electronics stuff, and let me tell you've done it pretty good in applying electromagnetic concept. here, thanks.
@grumich4084
6 жыл бұрын
That was EASILY one of the best tutorials I've ever seen on KZitem; I now feel like a "Stepper motor EXPERT!" Now, while you didn't cover programming the servo, for me, at least, that's straight-forward, but it's nice to know how code can make use of such servos. Thank you for a truly great job!
@BStateham
6 жыл бұрын
Thanks for the nice words @Grumich. If you are looking for a programming tutorial on the Arduino, check out aka.ms/28byjArduino
@dougdoug2165
6 жыл бұрын
Excellent, amazingly well orchestrated presentation, impeccable graphics, nicely narrated, not the monotonic sleep inducing dialog we are used to. I have seen the light of steppers thank you for your evangelism!!
@DiySpeaker-Vn
6 жыл бұрын
Các bạn có thể tham khảo sản phẩm tại: www.sendo.vn/dong-co-buoc-giam-toc-28byj48-5v-9375261.html
@structure7
7 жыл бұрын
I bought this cheap little motor/board combo on Amazon and thought, "well, let's see if there's any good documentation out there." I watched this video and fell out of my chair! I know how long it takes to put something like this together. Thank you very much for doing it!
@ChinqMiau1
6 ай бұрын
The quality of instruction and detail is astonishing. Thank you for making this a sharing this video!
@fijisalt7327
2 жыл бұрын
Bloody excellent explanation. I had to watch a few times to understand why we have to know the stepper motor mechanism thoroughly. Thank you 🙏
@theotherbart
3 жыл бұрын
Possible the best explanation I’ve seen on this topic! Thanks for putting your time in this!
@bertbrecht7540
4 жыл бұрын
This video will be valuable for the next 100 years.
@SolCunningham
8 жыл бұрын
Aside from the operating system that I run, this is one of the greatest things MS has done! Thanks Brett.
@casnic
8 жыл бұрын
A fantastic tutorial on stepper motors. Very easy to follow due to being explained so well. Thank you.
@edsoncapitani
9 жыл бұрын
Hi Bret, After seeing your video I felt compelled to say: Thank you mate! for such a detailed explanation. Thank you for taking the time to do this. The animations were fantastic help.
@Taha-jj1kr
7 жыл бұрын
Possibly The Best Digestible Informative Explanation about Stepper motors KZitem
@BernhardHofmann
9 жыл бұрын
I was confused as to why it took so many steps to get a rotation on the output shaft when I fiddled about with this from my MSP430. Your video explains it perfectly, thank you.
@madmanscam
8 жыл бұрын
Is this a tutorial or what ???? OMG just fantastic...am a mech engineer....turned photographer who lost touch of technology a while back and am back on it with the Intel Edison which I won at the IOT.....now this video put into place so many doubts i had....thanks so much... you are Awesome bret!!!! Subscribing to you channel now :)
@NoxuzBlog
8 жыл бұрын
way more info than needed, and its apreciated, thank you a ton
@papabone61
9 жыл бұрын
Thanks for the video mate. I am new to this lark and just starting out playing with Arduino for astronomy projects. Now I know about the stepper, next stop for me the dreaded coding. Never too old to learn :) ( 54 by the way )
@jonathanramirez4183
8 жыл бұрын
This is just what I needed! This is my first build and I can't tell how helpful this video was.
@edgwatergirl4220
6 жыл бұрын
OUTSTANDING TOP OF THE LINE SUPREME PRESENTATION!!!
@AlanMedina314
8 жыл бұрын
I love you Bret, This video is really helpful for my assembly class. We are working on basic stepper control using 8051. And this video really helps to get a deeper intuition of motor operation. This video Rocks.
@malcolmhodgson7540
6 жыл бұрын
Such a clear explanation. Thank you for this. I now understand the half step mode which explains why my original program drove the thing at twice the rate (wave) I was expecting from the spec. A quick tweak of the code and all is now perfect. Great job great video.
@leonardoaraujocosta
5 жыл бұрын
Excellent video!! Thank you very much. I did the math, it is actually 4076 steps for a full rotation of the motor shaft in half step mode, not 4096 as mentioned. I rounded from 4075.77284.
@franscoisjordaan3292
4 жыл бұрын
Thanks a lot. This is definitely the best explanation I have ever seen on KZitem for anything. Now I have a full understanding on how and why I program the code in my Arduino to drive the steppers. Cheers!
@tracywallace9588
8 жыл бұрын
Outstanding presentation. I have been programming for over two decades and am finally starting to get into physical computing. This was perfect. I have motors spinning! Thanks.
@ErikBongers
7 жыл бұрын
I second what many others have said already: this was an extremely well prepared and presented presentation. Thank you.
@murrygans1786
9 жыл бұрын
Finally, I think I understand how this little stepper motor works. Very nicely done. I can hardly wait to get home and write some code for the Arduino that I can control.
@davidmiller5832
6 жыл бұрын
The Best Explanation of Stepper Motors And Controllers that I've come across yet. Saved to Playlist/Subscribed/Notifications On.
@50lane50
9 жыл бұрын
This is the type of videos I've been looking for. Very informative and complete description of stepper motors. Great video Keep them coming !!!
@johnblack9038
7 жыл бұрын
I've never actually enjoyed death by powerpoint before. That was informative, and well presented. Thank you so much.
@BStateham
7 жыл бұрын
Yep. It's all PowerPoint! :-)
@johnblack9038
7 жыл бұрын
And I guess that wouldn't be an example of death by powerpoint because it wasn't boring.
@codeclubburtonsaturday6268
7 жыл бұрын
Thanks for taking the time to share this awesome detailed vid. I picked up 5 of these off ebay for the kids at code club to play with (me first though of course haha). I'll check out your arduino vid too as that's what I'll be hooking these up to.
@BStateham
7 жыл бұрын
Awesome!
@yongminkim3187
4 жыл бұрын
I finally got to understand the step motor after watching this video. Thank you.
@mikeeangel1
8 жыл бұрын
Just awesome the way you explain such a complex thing. Before seeing your video i didn't knew pretty much about step motors. thanks a lot buddy! Greetings from Mexico!
@lindaxin5034
7 жыл бұрын
amazing tutorials. seriously you have saved my life. instructions are SO clear and diagrams are REALLY helpful. THANKYOU!!
@janverhoeff8688
9 жыл бұрын
It did help me unerdtanding / starting with stepper motor Very much thanks from the Netherlands
@gullit97
7 жыл бұрын
Thanks man! Best tutorial i've seen in a long time! If only all my teachers were this clear!
@saharazen
6 жыл бұрын
Excellent, thorough, no wasted time, and very helpful. Thanks!
@351yt
6 жыл бұрын
Great intro to stepper motors. Thank you for providing this.
@rknaik76
9 жыл бұрын
Very informative video. The gear ratio part was also explained nicely, I got that motor now, waiting for the female-male pins to arrive.. Thanks a lot.
@NiceAussie
5 жыл бұрын
Excellent and very clear explanation. About the only thing I can think of that’s missing is what these can typically drive. ie application, torque etc
@BStateham
5 жыл бұрын
Agree, I honestly haven't used them in a ton of projects (just a couple) so I'm not sure I'm the best person to say. I'd love to hear what others are using them for though!
@edwardshaughnessy1107
6 жыл бұрын
Excellent video...had to watch it a few times to fully appreciate the subtly of it all.
@mateusz4r
8 жыл бұрын
This is the best and complex stepper motor tutorial i've ever seen. Good job, Bret! :)
@chance1986
4 жыл бұрын
Excellent description of the various drive methods. Well explained, articulate, with easy to understand graphics. I learned a lot. Thank you so much. (subscribed)
@crocellian2972
7 жыл бұрын
I know this topic from working stack shot macro photo gear. You are a master teacher. Thank you.
@Azyro777
7 жыл бұрын
I rarely comment on KZitem, but your video is too great to just got a thumbs up. I enjoyed the presentation and its explanation, it really helps to understand. (..and one of a few tutorials that doesn't lulaby me to sleep :D ). Definitely worth the 200k~ish view :)
@BStateham
7 жыл бұрын
Thansk!
@adamskee01
6 жыл бұрын
Outstanding video!! You are very talented at explaining things in a clear, common sense approach. Great Job!!
@fcampanini
5 жыл бұрын
That's great Sir! It's clear, easy enough for a maker non professional and, moreover for me, it's straight to the point! So... THANKS!
@nailedart4431
9 жыл бұрын
Just what I needed, thank you for a great video, animation and explanation. Totally supporting people like you.
@rhysun
8 жыл бұрын
A beautifully crafted tutorial, thank you. Bookmarked for future reference!
@mrnelgin
8 жыл бұрын
Nice video which helps me understand some of concepts behind the programming on the stepper motor. Thanks for sharing.
@reeseyme9613
8 жыл бұрын
very detail tutorial on the motor, i will say the best in youtube. excellent work. please keep making such tutorial on peripherals for microcontrollers.
@ElProfeGarcia
9 жыл бұрын
Excellent!!!
@marcotronic
6 жыл бұрын
best explanation on this system ever. Excellent!
@NetWanderer101
8 жыл бұрын
Excellent and very informative video. My students and I benefit a lot from your videos. Thanks a lot.
@moegasim
7 жыл бұрын
amazing...i actually just went and bought these today because of your video.....great help. thanks
@senthilkumarm9248
7 жыл бұрын
This is awesome video with clear animations and explanations. Hats off Bret. :)
@waltsteinchen
9 ай бұрын
Absolute phantastic detailed video!
@epineh
6 жыл бұрын
Lots of effort put into making this video, great job and thank you.
@amtpdb1
9 жыл бұрын
Thanks for the video. I am trying to work with a mm2001 driver board which uses this chip. Your explanation clears some of my issues. Thanks and have a nice day.
@aminebenkirane3006
Жыл бұрын
Incredible Content, explanation, and graphics, Thank you for the knowledge you transferred to us!
@earlevans3851
9 жыл бұрын
One of the best tutorial videos I've seen. I'm digging out my 28BYJ-48 motors and ULN2003 boards right now to try some of this. Thanks so much. By the way, based on your gear calculations of 63.65 turns of the inner rotor for one turn of the motor shaft, I figured that 10,184 full steps (32 per inner rotation) will get you exactly 5 turns of the outer shaft. Does that sound right?
@tonyiannetta
7 жыл бұрын
Very good explanation and demo of internal operations.
@peteralexander478
8 жыл бұрын
Best video,and follow up I have yet seen, Nice one Bret.
@naga540
9 жыл бұрын
Great video man, I'm building an xy-ploter table and your video was really informative about the how this motors work!
@stevedayyne
8 жыл бұрын
Thanks Bret, a really well presented demo, with great graphics!
@gopalrao4548
10 ай бұрын
Excellent explanation of stepper motor... and driver...
@michaelcullis5071
6 жыл бұрын
Great video, I now understand steppers a lot more.
@thomasalexander1563
7 жыл бұрын
Nice visualization of stepper motor... and the explanation make everythings clear.. Thanks..
@tezz777able
9 жыл бұрын
well done and thank you for taking the time to do the video, that what makes youtubers great
@Asturiasgk
9 жыл бұрын
Thanks for putting in the time and making this great and informative video.
@timspychalla
7 жыл бұрын
Thank you so much for creating this video. It was super informative. I just ordered a couple of these motors off of ebay and am excited to try them out!
@derekhawley9660
2 ай бұрын
What a fantastic explanation, thanks Bret. Derek (UK)
@kommineninaveen
7 жыл бұрын
Very well explained, this is the best tutorial I have watched till date! 👏👍🏼
@huraibyel-huraiby7462
9 жыл бұрын
The go to guide for stepper motors.
@makingtechsense126
6 жыл бұрын
Thank you for the excellent video as well as the sample code on GitHub. Some people have been recommending physically modifying these stepper motors to force Full Step stepping. I thought it was rather odd since I was pretty sure you could just code it. Your video clearly explained how to achieve full step using code.
@annaoaulinovna
8 жыл бұрын
the best stepper motor video. thank you very much.
@darioIC
7 жыл бұрын
wow, that's a very clear and very informative video. Thanks for taking the time to make it.
@andrewa9496
6 жыл бұрын
This video is very helpful and informative. It helped me out so much on a project I am doing.
@petefrise6654
8 жыл бұрын
WOW, that is one of the best videos, you are so smart and I learn a lot, thank you for sharing
@meobridger4096
8 жыл бұрын
So true.
@MrTreeTiger
8 жыл бұрын
A very detailed and useful explanation - good work!
@hernandjavines2087
6 жыл бұрын
Wow! This is a great explanation of this little motor. Thanks you.
@jakekoethler7206
8 жыл бұрын
Really great video. Best stepper tutorial I've seen. Looking forward to the follow-up👍
@Booruvcheek
5 жыл бұрын
Great video, very clear and concise, beautiful presentation. Thanks a bunch!
@shahrukhali8704
6 жыл бұрын
Thank you, this was an amazing introduction to stepper motors!
@arufuredo
6 жыл бұрын
Just an excellent video, great job! Thanks for doing this. Cheers from Argentina.
@aspolat
7 жыл бұрын
such a beautiful explanation and tutorial. thank you so much.
@nicoladelia3488
7 жыл бұрын
Thank you for sharing, that was clear and easy to understand.......you have some serious skills! Really appreciate it!
@megantonioangel
9 жыл бұрын
This video deserves a like. Quite useful!
@user-wn4nl7bp9h
7 жыл бұрын
That is some thorough explanation... Thanks for this video
@jonponton
8 жыл бұрын
Extremely concise and well explained. Many thanks!!
@embeddedtechnologies9425
Жыл бұрын
you are amazing, Just one word is enough. keep doing this, will pray from the God, a health and wealthy life.
@DGIA
7 жыл бұрын
Great video, graphics and animation! good job!
@mozkitolife5437
3 жыл бұрын
Perfect. Can't fault that. It helped me a lot. Not sure where the dislikes come from on KZitem for videos like these. Dumbfounding.
Пікірлер: 479