Stay tuned for more! Until then follow us everywhere else! TikTok- vm.tiktok.com/ZMRtRVb2o/ Facebook- facebook.com/profile.php?... Instagram- / con. . instagram.com/nickdavis5.9?ig...
When you have a 30in tire and a 32in tire you are not actually gaining two inches of clearance because the circumference only adds one in on the bottom and one in on the top which only gives you an extra one inch of ground
@2up2down45
7 ай бұрын
For sure but 29.5 vs 32s is a big difference
@lisforlifer
7 ай бұрын
@@2up2down45 and everything I have seen shows that the larger tires turn it a little bit slower and don't break axles. So for sure they are a benefit to be a little bit larger than factory tires. And I have watched a lot of videos to come to that conclusion.
@902crew
8 ай бұрын
I have a 2020 Rene 1k xmr will I be able to spin 31 inch og outlaws without it being clutched
@2up2down45
8 ай бұрын
Yes it will
@livelaughlove20able
Жыл бұрын
What spring and weights were you running in your cvtech primary with the 29.5 assassinators??
@2up2down45
Жыл бұрын
16 gram 1017 spring with epi red secondary spring was my first time tuning a clutch could have definitely done a tad better
@livelaughlove20able
Жыл бұрын
@@2up2down45 that’s the same setup on my outty 650 max I’m running with my assassinators but still seems to be lacking a bit I was thinking about going to the white epi spring or something more but definitely staying with the 29.5 because I don’t wanna do floorboards just was wondering your opinion thanks!
@2up2down45
Жыл бұрын
@@livelaughlove20able get a ecu reflash and do the epi white secondary spring and might have to take a little weight out the primary
@livelaughlove20able
Жыл бұрын
Thanks for all the info
@joesquire7
Жыл бұрын
Are your tires cut and grooved? If not U should get them done
@2up2down45
Жыл бұрын
Mine aren’t but I definitely want to it makes them much more lighter!
@kevinfebo797
Жыл бұрын
when you had 29.5" and clutch what was the max speed for low/high?
@2up2down45
Жыл бұрын
Could run about 50 mph in low I never run high but I hit 60 a few times in high never maxed it out
@kevinfebo797
Жыл бұрын
@@2up2down45 okey, well guess i Will order a cvtech. Your bike is sick btw :D
@2up2down45
Жыл бұрын
@@kevinfebo797 appreciate it 🤙🏼
@korybliss915
Жыл бұрын
What floor boards do you run?
@2up2down45
Жыл бұрын
Custom built floorboards
@joshuayoungblood8634
Жыл бұрын
What about on a 570? 32 too heavy?
@2up2down45
Жыл бұрын
As long as you clutch it really good and get a good tune and exhaust id say you will be fine
@joshuayoungblood8634
Жыл бұрын
@@2up2down45 alright thank you ima look into it all if it’s too much I’ll just get 29.5.
@destinhook3826
Жыл бұрын
The 570 headlights make it a bitch to run 32s
@justfishing6686
Жыл бұрын
Does it have a lift on the 1000?
@2up2down45
Жыл бұрын
It’s a 650 and no lift
@Mudderking20010
Жыл бұрын
You shouldn’t need clutch work to turn 32s on a 1000
@2up2down45
Жыл бұрын
You definitely want clutches to turn 32s yes it may turn them but your loosing so much power and it will smoke the belt in thick stuff
@Mudderking20010
Жыл бұрын
@@2up2down45 so I need to go out and spend 2k in primary and secondary clutches to turn 32s or a clutch kit?
@2up2down45
Жыл бұрын
@@Mudderking20010 clutch kits are a waste of money definitely go aftermarket primary
@lisforlifer
7 ай бұрын
I thought I heard in the video that someone said that the comparison to 29.5 let's just say 30 in tires compared to 32in tires is another to in more ground clearance which is incorrect because the tires are split between the extra tire height because you get one in up on top and one in on the bottom for a total of 2 in which only gives you an extra one in ground clearance. So between a 30 inch tire and a 32 inch tire you do not actually get to in because one in is on top of the tire and one in on the bottom of the tire if you don't totally understand that Google it and figure the fax out
@lisforlifer
7 ай бұрын
Someone said that between a 30in tire and a 32in tire that you would get an extra 2 in of ground clearance that is incorrect you only get one inch of ground clearance because the extra circumference of the tire gives you one in more on top and one in on the bottom which only gives you one more in ground clearance.
@Devin.Plyler
Жыл бұрын
What psi?
@2up2down45
Жыл бұрын
I always run 0-3 psi if they are beadlock wheels and 3-8 if they are non beadlock wheels
Пікірлер: 39