Awesome! More MR2 content! I found this right after watching the first two episodes of the Gears & Gasoline swap.
@CedricParker
Жыл бұрын
Thanks for the support, the G&G videos are great and can't wait to see their Mr2 on track
@potatogamer5559
Жыл бұрын
lmao me too
@BoostedorNA
Жыл бұрын
Nice to see another Spyder build!
@CedricParker
Жыл бұрын
Thanks for the support
@IGDesigns
Жыл бұрын
Good luck!
@CedricParker
Жыл бұрын
Thanks for the support
@dimitriliving
Жыл бұрын
Looking forward to see the results.
@CedricParker
Жыл бұрын
thanks, it should be a blast to drive when done
@hekticone
Жыл бұрын
Looking forward to seeing your swap!
@CedricParker
Жыл бұрын
Thanks for the support
@e5141981
Жыл бұрын
I plan on doing this same swap so i will be tuned in.
@CedricParker
Жыл бұрын
I should have a new video out by the end of the week with some updates
@p2skater1
Жыл бұрын
I didn't see you 2022 at TF. I drive a 1993 MR2 turbo (yellow.) I just did a 2gr swap in it and I'm definitely going up for TF 2023! The 2AR will feel crazy up there.
@CedricParker
Жыл бұрын
I'm planning on being there this year. Let's try and get a run or 2 in together
@kdotdo
Жыл бұрын
Looking forward to your swap!
@CedricParker
Жыл бұрын
Thanks for the support
@blugecko1978
Жыл бұрын
subscribed for the build 👍
@CedricParker
Жыл бұрын
Thanks for the support
@LaredoCourtCrushers
Жыл бұрын
I’m not an expert on the 2AR platform or anything, but from my understanding the 2AR FXE from a hybrid camry or lexus es 300h is the 2AR that can do around 260 hp with a small modification done to the timing of the hybrid motor and by replacing the exhaust for an OEM intake cam. The 2ARFE in the scion tc only outputs around 180 hp, and has a much lower compression ratio, so you can’t really get much more hp without doing throwing in a turbo.
@CedricParker
Жыл бұрын
So the same guy that discovered making power with the hybrid motor also developed cams and an intake for the regular 2ar. with that set up it makes about the same amount of HP as the Hybrid with the 2 intake cams. But id really like to know how much HP Papadakis 2ar made without a turbo.
@CedricParker
Жыл бұрын
In case your curious kzitem.info/news/bejne/p6eEuXmErmRqlKA
@CedricParker
Жыл бұрын
Yes, Marcs been doing alot of delopment with this motor and is pretty much the aftermarket support, his discord is worth joining. And yeah I wish that more info was out there about the drift tc.
@JuanMacarioksp
Жыл бұрын
Amazing! I had a 2001 with a type r K20a swap with matching 6 speed with lsd most fun I’ve ever had in a car. Still miss it. Expensive swap though I wonder if this is cheaper and how it performs! Best of luck!
@CedricParker
Жыл бұрын
I bet a k20 would be fun
@firstwordcar
Жыл бұрын
I don’t know where you’re located but I’m in Cobb County and attend the ARSCCA Autocross events. I’d love to see this build. My first 1zz went out the same way and I have been torn between turbo, K swap, and 2GR swap ever since. If you want to sell me the 1ZZ I’ll buy it if the price is right haha. Looking forward to seeing how this build goes 🤘🏼
@CedricParker
Жыл бұрын
I'm in Augusta but not much is going on here, so I end up going to events in the nearby cities. And I'll let you know about the 1zz. Part of me wants to keep it and learn building an engine, maybe put it in an aw11
@firstwordcar
Жыл бұрын
@@CedricParker I think a 1ZZ in an AW11 would be great. If I ever do a Kswap I was thinking of doing the same thing with my 1zz 😂 I just want to have another one laying around so I can have it ready for when this one pops again. The main reason I stayed with the 1ZZ and built it is because they’re cheap and easy to come by. Also I love the torque curve and sound of these things.
@CedricParker
Жыл бұрын
@@firstwordcar Yeah, i think the 1zz was great in the mr2 spyder, that weekend I destroyed the engine, I was keeping up pretty easily with a turbo fd rx7. He would pull away in the straights but I would quickly catch up in the corners.
@firstwordcar
Жыл бұрын
@@CedricParker Hey man. I just met you at C&O today. It's funny just 4 months ago I was OK with the 1ZZ but I'm already switched to the K swap idea again. Hopefully we can compare swaps when I'm done haha
@ctr6224
Жыл бұрын
I'm having a hard time setting up my car. Which spring rates you recommend
@CedricParker
Жыл бұрын
that's a loaded question, whats done to the car and what kind of driving do you do?
@ctr6224
Жыл бұрын
@@CedricParker touge
@CedricParker
Жыл бұрын
@@ctr6224 For me the best mod I did for suspension was whiteline swaybars front and rear. I dont know all the maths behind it but swaybars effect your springrate. I was able to pretty much eliminate body roll with swaybars alone. I have Stechs , my only complaint against them is, I'm a little to low. If I had coilovers id go a .5 inch higher all-around
@lltysonll
Жыл бұрын
Are you around savannah? I have a mr2 spyder in SAV. Im K24 swapping mine next week.
@CedricParker
Жыл бұрын
I'm out of Augusta Ga
@paulshibbs
Жыл бұрын
Let me know when you’re in Savannah. I’d love to see the 2AR. I can show you my 2GR swap spyder. Do you go to Hutchinson Island?
@CedricParker
Жыл бұрын
will do, id love to ride in a 2GR Spyder, And yeah I've done autox on Hutchinson island a couple times
@michaelscholten9753
Жыл бұрын
It’s such a great swap
@CedricParker
Жыл бұрын
Yeah, I hope so I've never driven one, but on paper it makes a lot of sense
@michaelscholten9753
Жыл бұрын
@@CedricParker the first time you drive it is a little scary
@CedricParker
Жыл бұрын
@@michaelscholten9753 yeah....That's a good thing right? Did you swap yours as well
@michaelscholten9753
Жыл бұрын
@@CedricParker I think I was the first person other than Marc to complete the swap. Nov 2019
@CedricParker
Жыл бұрын
@@michaelscholten9753 this is still a pretty new swap then, if one of the first ones was done in 2019
@stanleybacklund5614
Жыл бұрын
What hardtop is that?
@CedricParker
Жыл бұрын
Its the OEM Hardtop from Toyota. I sourced it from the UK as it was never for sale in North America
@rolldog82
Жыл бұрын
How much is the swap? Keep us posted
@CedricParker
Жыл бұрын
I think all in, car + hardtop + swap and aftermarket parts I'll be right around C5 Corvette prices
@rolldog82
Жыл бұрын
@@CedricParker 10-12k? Why not kswap?.I like it that its a 2ar-fe 👍
@CedricParker
Жыл бұрын
@@rolldog82 Ill make a video about it eventually. The cost of a reliable ksawp that can run laps on a track is a lot more then the 2ar. It's hard to find a k that isn't clapped out and needs a rebuild. It's even harder to find a low mileage 6 speed. I didn't want to separate the block and head. It cost more to make the same amount of power as the 2ar. And the community/discord server for the 2ar / 2gr is way more supportive. Any question I've asked on FMWs discord someone will answer it or point me in the right direction. When I was doing research on the kswap I'd just get people telling me to search.
@rolldog82
Жыл бұрын
@@CedricParker am glad you to see more 2ar keep it in the family name. Thanks for letting me know idk I had to rebuild or added more parts on k24 to Rev so high also what am hearing which extra money right. I appreciate your honesty everyone tell kswap or nothing... Haha your right doing your homework and asking people is best thing to do. Man 10k for kswap here in Los Angeles now is Krazy.
@rogerlee2771
Жыл бұрын
Bro you live in Georgia?
@rogerlee2771
Жыл бұрын
I'm in Covington, shit I would love to help you with that build lol. I'm definitely going this route as well.
@CedricParker
Жыл бұрын
@@rogerlee2771 that would be dope, I'm going to try and go to tougefest, but it'll depend on how long it'll take to get parts
@rogerlee2771
Жыл бұрын
Whens tougefest?
@CedricParker
Жыл бұрын
@@rogerlee2771 it's always the first weekend in November. This year it's the 4-5
@ProfessorOzone
Жыл бұрын
You're not the only one with this problem. I've had 3 of these engines go in this fashion. The 1zz is a total piece of crap. Good luck with the build.
@CedricParker
Жыл бұрын
The 1zz going out, was a blessing in disguise
@ProfessorOzone
Жыл бұрын
@@CedricParker Yeah, I think so. I replaced mine with a 2zz, but honestly I'm still not that impressed with it either. If it gives me too many problems, I might go K swap or something.
Пікірлер: 60