DIY: Replacing a gasket can be simple as 1,2,3, and sometimes we’re not as lucky. I’m this video I’ll show you how to replace the exhaust manifold or header gasket, it comes with some complications, but after watching this, you’ll have a better understanding of what you will deal with and try not to make the same mistakes that I did, my mistakes are your knowledge.
Tools need for this repair:
10mm socket
14mm socket (deep and sort)
3/8 or 1/2 ratchet (power tool will be quicker)
Extension 3/8 or 1/2 whichever you prefer
Cheater bar(pipe)
E8 torx socket
PB blaster (penetrating oil) whichever ones you prefer is your choice also.
Torque wrench (always torque to spec if you can)
Needle nose pliers
M10x1.25 tap:
www.amazon.com...
Torx Socket Set:
www.amazon.com...
Exhaust Manifold Gasket:
Part # 17173-46051 can be purchased anywhere eBay, Amazon or Lexus.
Here is a link to eBay (hopefully it’s still there)
www.ebay.com/i...
Amazon: (hopefully it’s still available)
www.amazon.com...
Disclaimer:
“Sokhom Garage” Will take no responsibility for any damages, injuries, losses or liabilities associated with performance on your vehicles or others property, you do this at your own risk, my video is for guidance, and educational/informational purposes. As always be safe and wear ppe (personal protection equipment)
#DIY #Lexus #Toyota #exhaustManifold #headers #gasket #IS300 #GS300 #SC300 #2JZ #2JZGE #SXE10
Негізгі бет 2JZ Exhaust manifold/header gasket replacement GS300| SC300 | IS300
No video
Пікірлер: 14