Great video again Josh !! Keep up the vids coming.
@savagefabrication795
3 жыл бұрын
Awesome video!!!
@TheProchargedmopar
3 жыл бұрын
👍💪
@user-el4ii7zq6l
3 жыл бұрын
😂😂😂😂😂 the sales man telling the mechanic his truck drivers better but his has like 10% more HP on the dyno 😂😂😂😂 I'll take better to drive any day!!
@christophergonzales2627
2 жыл бұрын
Just got a 99 ram cummins. So would a intercooler be a good starting mod. What are the top 5 mods to do under 1k
@tiagopparaiba210
3 жыл бұрын
can i use a cp3 stock with a 12mm BD diesel? Cummins 5.9
@om603denis
3 жыл бұрын
Ugh why don't you show the finished product of the bead roller!!
@maxzwart2822
3 жыл бұрын
Bottom end work?
@CumminsWorks
3 жыл бұрын
Wagler Street Fighters and 14mm mains.
@j.c.316
3 жыл бұрын
Myer’s usually on camera like he walked out of a coal mine lol Hard working man!
@vincentknight5358
3 жыл бұрын
Every shop has one guy that gets wrecked 5 mins after walking in the shop. Myer could be that guy
@stevenragsdale9603
3 жыл бұрын
😂😂😂😂
@73cjproject
3 жыл бұрын
Love the content! That truck must be a party on the street! Burnout special for sure. Love the camaraderie and the support for one another.
@matt72991
3 жыл бұрын
can we get more info on the rack and pinion swap??
@TheProchargedmopar
3 жыл бұрын
Hahahhaa, Drive pressure? THATS JUST A NUMBER. 😝
@patchesproduction4762
Жыл бұрын
Yo, I love the video, is there a link to the intercooler you have on the video? I have a 02' 5.9 cummins and I want to upgrade the cooler....
@supercharged2414
3 жыл бұрын
Appreciate Meyer explaining why a 3 inch intercooler works better than 3 1/2. 45 degree drop in intake air temp is a big improvement. You need to sell the pipe Meyer makes with the intercooler. Of course you used Power Driven Diesel boots on it.
@woos31
3 жыл бұрын
Shawty is gettin saucy Mer!! Bad-A build man, I bet that's nasty on the street
@lyndonhamby7432
3 жыл бұрын
Vette killer 💪🏻💪🏻👍👍
@jamesmarlar696
3 жыл бұрын
Love it how would the adaptation be to a stock 12valve been Waiting for this since Meyer and I talked about this since I would be installing at home
@pigeondrama
3 жыл бұрын
ALRITE WERE GONA CUT THIS GUY OFF BEFORE GIVES OUT MORE BAD INFORMATION ......LMAO
@bcbloc02
3 жыл бұрын
Remember in a heads up rolling race Meyer would probably beat you because of spool time. Since power is only a couple hundred different.
@horsetorquesdiesel
3 жыл бұрын
He spins from a roll too. 4x4 for the win!
@bcbloc02
3 жыл бұрын
@@horsetorquesdiesel True! Meyer needs to 4x4 swap that thing. Or just go ahead and put the engine and trans in a 3rd gen to begin with. LOL
@DriftJesus
8 ай бұрын
good vid! more info on R&P swap?
@jeffbeaird747
3 жыл бұрын
I'm sure most of us are looking for the best daily driver, I think Myer takes this one to the bank..!!!!!
@cesarlozano9549
3 жыл бұрын
You made my day
@jakobcurtis9751
3 жыл бұрын
heard meyer talkin abt four linking the shorty in a past video. i would love a video of that happening if it’s not done already
@horsetorquesdiesel
3 жыл бұрын
Not done yet!
@mikestrucks
3 жыл бұрын
Awesome video guys 😬🤘🏻 Man the powerband was perfect on the last run !!
@horsetorquesdiesel
3 жыл бұрын
No kidding!
@j.c.316
3 жыл бұрын
Straight to it lol… Call out the crew on the daily driven HP ranks lol. Good content man.
@Sir.VicsMasher
3 жыл бұрын
I wonder if he could have swapped this into a 3rd gen reg cab, short bed, 4wd half ton... maybe upgrade the CV shafts if they become an issue.
@slowaf12v
3 жыл бұрын
Great Video Josh!!! Might look at them for a new intercooler!!!
@trevorhenry7339
3 жыл бұрын
So with some custom piping we can make a on3 cooler fit my p24v. Good to know 😉
@swift__
3 жыл бұрын
That MFers mean 🤘🏻🤘🏻
@TheDe3th
3 жыл бұрын
Order an on3 intercooler for my 2008, as soon as it was in stock, still sitting in the box
@michaelsmigelski7123
3 жыл бұрын
Kinda want to do a 3rd gen swap in my 2nd gen
@jmillhone5.9
3 жыл бұрын
I’ve been thinking the same thing
@Rx7man
3 жыл бұрын
Is that still on a stock HE351? He should definitely go to a 67mm turbine, hardly lose any spool up and flows far better, Compressor.. 62mm or 67 would probably be good too
@CumminsWorks
3 жыл бұрын
Nice to see you around still! It’s a 60/67. I’m sure a larger compressor would be beneficial for power, just not sure if it’s worth the spool loss.
@Rx7man
3 жыл бұрын
@@CumminsWorks At least it has the 67 turbine, that's a big restriction on the stock one.. I don't know if you'd notice a terrible spool loss with a 62 compressor, though a 67 it would be more noticeable
@IanYav5.9
3 жыл бұрын
Recently put in a new intercooler in my second gen, it was a swing and a miss on placing the mounting for my AC condensor correctly as well
@nevinbontrager8828
5 ай бұрын
Just bought an on3 intercooler last night for my 2nd gen 24v based on this video. Then they called me today and told me they are out of stock and building again in in 4 to 6 weeks. Lol facepalm
@horsetorquesdiesel
5 ай бұрын
Damn that sucks!
@nevinbontrager8828
3 ай бұрын
Well it finally came this weekend. It only took 10 weeks. Lol
@diesel_gee1187
3 жыл бұрын
Cool down equals more power, cool oil more power.
@bernhard8540
Жыл бұрын
We miss mers smiling face saying weird words on camera haha❤❤
@horsetorquesdiesel
Жыл бұрын
facts!
@drewsharpe7484
3 жыл бұрын
Is Meyer running a stock 47rh output?
@CumminsWorks
3 жыл бұрын
Yep! So far so good.
@jesserasso1042
3 жыл бұрын
A loco it's a 19 2005 a you crazy you gotta switch the intro to your new engine blowing up
@glennhobbs59
3 жыл бұрын
That’s impressive
@stanskate40
Жыл бұрын
Hey Myers , can you do a detailed show and explain on the rack & pinion steering and also brake hydro boost conversions 2nd to 3rd generation ?
@blakedismuke3656
3 жыл бұрын
Hey yeah man thanks for more videos. Also y'all should help push RPM the act.
@mvcg-cl4cr
3 жыл бұрын
Aint no body gunna follow them rules any way.
@horsetorquesdiesel
3 жыл бұрын
Have you read it like all the way through? It isn’t doing anything. Just words on a screen.
@blakedismuke3656
3 жыл бұрын
@@horsetorquesdiesel no I haven't read it yet but I will have to now I'm pretty tied up with what's going on in Arizona lol
@colinlawrence2186
3 жыл бұрын
That was an awesome video real world testing on trucks most people can afford i really appreciate the time you guys put into making these videos keep them coming As always God bless all of you and stay safe out there 🙋♂️🇬🇧
@g56mark17
3 жыл бұрын
How far out are you? I've got a 07 5.9 that needs the engine rebuilt.
@adrianmilissa9271
3 жыл бұрын
So even in a stock turbo setup an inner-cooler upgrade would be a good investment? Adrian
@raymey4011
3 жыл бұрын
Normal cruising rpm 3500 lmao
@robertd6925
2 жыл бұрын
Have you used their intercoolers before? How do they hold up?
@horsetorquesdiesel
2 жыл бұрын
They are outstanding
@jeffbeaird747
3 жыл бұрын
I was in your of the woods on Sunday, I drove down to Reno for work and almost made the additional drive to see if you guys were around but I chickened out and hauled ass for home. Still thinking what if... lol
@CumminsWorks
3 жыл бұрын
You would have caught us setting records with he351’s ha!
@jeffbeaird747
3 жыл бұрын
@@CumminsWorks dammit I should have made the trip, lol
@jacobormsby9241
3 жыл бұрын
this is just a suggestion but you might see more improvement by getting that filter out of the engine bay. sucking hot air is a HP killer.
@horsetorquesdiesel
3 жыл бұрын
Agree but we like to dyno them as we drive them
@jacobormsby9241
3 жыл бұрын
@@horsetorquesdiesel thats what i mean though, build yourself a true cold air intake and i bet you will see the same again improvements you saw with IC
@tessastump
3 жыл бұрын
Is the other guy single?
@CumminsWorks
3 жыл бұрын
Yes he is very single and looking for a good man or woman to fulfill his heart
@horsetorquesdiesel
3 жыл бұрын
He’s too busy doing hot guy shit
@CanoeBills
3 жыл бұрын
If you’re lucky he might take you to Hawaii
@zeharmbringer3397
3 жыл бұрын
How a man such as he who possesses not only haunting good looks, warrior like physique, Einstein-esque intellect, nigh mythical engineering prowess AND multiple trucks that are nothing short of absolutely staggering could ever possibly be single is beyond me
@bcbloc02
3 жыл бұрын
@@zeharmbringer3397 He needs money for the truck. Single life for the win!! lol
@dominicalvey2655
3 жыл бұрын
What cam is in it?
@horsetorquesdiesel
3 жыл бұрын
188/220
@njdevi11
3 жыл бұрын
What's done to Meyers he351?
@horsetorquesdiesel
3 жыл бұрын
Billet 60mm wheel 67 turbine
@njdevi11
3 жыл бұрын
@@horsetorquesdiesel How bad is that to do for the home gamer with a 10" lathe and/or a bridgeport?
@CumminsWorks
3 жыл бұрын
@@njdevi11 it’s just awkward to hold the 351 centered in the lathe, it’s not to bad though, and then I through it in the mill to take some off the face, again, wasn’t to bad just had to go by hand.
Пікірлер: 83