Had this Done to my 2002 at dealer before i ever took it home, 207,000 Miles 18 years later still rides and runs great, for 18 inch rims the biggest tire you can Put on before rubbing is 285 65R 18
@acast6961
4 жыл бұрын
You think it’s the same for single cab?
@BENDOVER-xr8pc
3 жыл бұрын
@@acast6961 wdym?
@ghostkutz
4 жыл бұрын
hey bro sick truck, was wondering if you could send me some pics of your truck with the 3/8 drop, been wanting to buy the same kit and wanted to see what it would be like with the 2 in drop shackles aswell as the kit
@Daniellopez-ki4oz
2 жыл бұрын
aye bro did you end up buying and installing the kit?
@pandawillymofo6518
5 жыл бұрын
Link to kit?
@RecklezzLTX
5 жыл бұрын
Is the 3/6 drop from spindle source? If so how does it ride? No problems aligning?
@manuelalanis3860
4 жыл бұрын
Can ii use old shocks?
@TonyStony
4 жыл бұрын
will wear out real quick
@yamahar1castillo923
4 жыл бұрын
Yo yo yo !!! Que paso cortastes el chasis o nk ! Tengo una daytona que quiero bajar
@TonyStony
4 жыл бұрын
si la bas a bajar mas de 6 pulgadas de atras si tienes que , yo tengo la mia asta el piso
@mbgglomar2956
Жыл бұрын
I’m here 3 years after how did you remove the springs from the front with out them jumping out?
@marcusdeleon5045
5 жыл бұрын
Have you had any problems with hitting the frame without the c notch? About to do the same drop on my sons truck and don’t want to cut the frame.
@MidnightPolaris800
4 жыл бұрын
nice truck man, check out my 03 hemi ram!
@1984tonyz
2 жыл бұрын
do you want to sell the datsun?
@CarlosGonzalez-he2ws
3 жыл бұрын
Rear shocks are upside down
@andyfaze1163
3 жыл бұрын
Bro where did you get the kit
@dlo__3929
4 жыл бұрын
Where did you buy the kit bro
@cobysgarage3085
3 жыл бұрын
What tire size is that
@brianbenitez7514
4 жыл бұрын
Did have to weld the flip kit?
@Chin_gon29
4 жыл бұрын
Brian Benitez no bro flip kit is all nuts and bolts
@Rudy.78
4 жыл бұрын
Brian Benitez only got to weld the perches. If not you’ll have problems with your pinion angle which could be dangerous if you don’t
@FatCat405
4 жыл бұрын
@@Rudy.78 what are the perches
@Rudy.78
4 жыл бұрын
fight dice www.dodgetalk.com/threads/welding-perches.215082/. Read through this and you’ll understand
@FatCat405
4 жыл бұрын
@@Rudy.78 Thank you!
@erikcgalcocerventura66
5 жыл бұрын
What kit do you have? Barely bought one for an 06 ram from spindle source. Looks alike. 3/6 drop too. How does it ride?
@RecklezzLTX
5 жыл бұрын
Erikc G Alcocer Ventura Is it a good kit? Thinking in ordering the same kit for my 06 ram
@erikcgalcocerventura66
5 жыл бұрын
@@RecklezzLTX yeaaaa, parts feel super strong. Doesnt look cheap. Its hard to find a good kit for 06-08. .im going to get it installed tomorrow with a friend. I got 2in shackles, so in total itll be a 3/8 drop.
@RecklezzLTX
5 жыл бұрын
Erikc G Alcocer Ventura How did it go
@ghostkutz
5 жыл бұрын
@@erikcgalcocerventura66 did you even put the shackles on with the kit? i got some shackles a while ago to level out my truck and im thinking ab getting that same 3/6 kit from spindle source
@erikcgalcocerventura66
5 жыл бұрын
@@ghostkutz yeaaa, i left the shackles on there. I just had the kit installed yesterday. Im running a 3/8 drop now on 275/55r20 tires. The rear tucks on the tire. I had to roll the fenders. The front is low too. A little bit less than 3 fingers of wheel gap. good quality riding kit. Rides smooth
@DavidPerez-oj7br
5 жыл бұрын
Hey bud do you have any issues with your pinion angle?
@FatCat405
4 жыл бұрын
What's the pinion angle
@BENDOVER-xr8pc
3 жыл бұрын
@@FatCat405 the front
@lilwano713
5 жыл бұрын
What shackles did you use ?
@thtblack5.7
2 жыл бұрын
Stock shackles, a flip kit drops the back 6 inches
Пікірлер: 41