Filmed in 4K with- GoPro HERO9: amzn.to/39PdARu Media Mod: amzn.to/3wBnEaL Battery Pack: amzn.to/3ut0fpW
@NextLevelTruth
3 жыл бұрын
Damn your slamming your hood with that nice car? That’s what I was told when I bought mine too. But I have my own technique. Close is gently, reach down to the hood latch, move the lever with your hand and push down 😁 You should be able to just push it down shut. No more slamming the hood 👍
@Wretched2JZ
2 жыл бұрын
Works sometimes, sometimes it doesn’t .
@RJon2006
3 жыл бұрын
I like my core support cover. I am keeping my OEM one but so far I like it.
@03boostedvenom69
2 жыл бұрын
I agree 100% with the 315 vs. 335's. Bigger is not always best for grip and traction.
@pnw_pharmer3990
3 жыл бұрын
Just came across your page. And definitely subscribed. Just got a 03 cobra and I can tel im gonna learn so much more from you bud. 👍
@Intervention302
3 жыл бұрын
Thanks for the sub!
@anthonylaudano9751
3 жыл бұрын
@@Intervention302 What exhaust do you have on the cobra
@CptJackMySparrow
3 жыл бұрын
I picked up jlt one piece rad cover, I just like that they cover the headlights portions
@svt_nick9056
3 жыл бұрын
I completely agree with the 2nd one! Had one on my 03 as well, and the fitment was horrible, ended up chipping paint off under the hood! Went back with the OEM one as well.
@jasonloesch8365
3 жыл бұрын
Great video! You've done a great job with that car and the mods compliment it well. Still a long way to go on my SB.
@sabinoguzman7780
3 жыл бұрын
U sold me on the TQ’s I was gonna buy 305/35/18 on the r888 but not no more after seeing those pictures
@Intervention302
3 жыл бұрын
The 305/35 are a good pick as well. Use with confidence
@MikesGarageRoute66
3 жыл бұрын
Can you do a video with the pro and cons for tires in the 500 - 600hp range. 555r, r888r, proxy TQ. Looking for longevity, handling, dry traction, and noise level comparisons. 315/35/17
@Intervention302
3 жыл бұрын
Sure I'll work on that
@MikesGarageRoute66
3 жыл бұрын
@@Intervention302 Thanks!
@joseMartinez-ly9dk
3 жыл бұрын
Thanks for the advice i just ordered a pair of 315 35 18 tq
@SVTgotti
3 жыл бұрын
two more weeks and i get my tf03's hell yeah
@g1rthbrooks016
2 жыл бұрын
you weren’t kidding at all haha nice meeting u g 🦉💎
@shaun6562
3 жыл бұрын
Nice video, thanks for the content!
@kennethdurbin3385
3 жыл бұрын
I like my Terminator cover. Fits good and the hood shuts perfectly. I'm running 17" staggered chrome replicas but after seeing yours, definitely gonna look into those. Did you shave that irs bolt down? My 315s in the rear only rub when it's on a lift and I have a set of the allen head bolts here. Been debating for over a month on swapping them out and upgrading my setup.
@Brett321
3 жыл бұрын
What gears do you run?
@Intervention302
3 жыл бұрын
Stock 3.55
@DriesOG
3 жыл бұрын
Your channel has made me want to get rid of my 2010 C6 GS... What's a realistic price for either the DSG, MG, or SB with 50k or less miles and a 2.9L? I'm looking to spend 30k or less. Is it possible?
@Intervention302
3 жыл бұрын
Id say it's still possible yes. But pricing is going up and UP so don't wait!
@DriesOG
3 жыл бұрын
@@Intervention302 absolutely! I want one by the end of this year!
@ivanpena1212
3 жыл бұрын
Why don't you bring your car to the car meet on nashua nh Friday afternoon Target plaza
@Intervention302
3 жыл бұрын
Because I work... Every single weekend, till the Fall. That's the life of a busy ice cream restaurant. Ill try to go in the Fall
@arnuflowzz7952
3 жыл бұрын
what springs do you run?
@midnight347
2 жыл бұрын
I'm not sure why guys in the terminator crowd say the 2650 isn't that good I seen a guy with a gen3r doing like 675 whp on pump gas with a bone stock long block cobra and no headers I mean that's pretty good power. I gaurantee if you had one on your engine with cams and a full exhaust and had it pullied down on e85 that thing is gonna make damn close to the same if not more power than a 2.9 whipple. They do as well or better than 2.9s on the gt500 and coyote platforms not sure why that wouldn't be the same with the terminator platform. The 2650 tvs rotor pack is stupid efficient for its size. I'm not a whipple hater by any means I'm just a tvs guy. I will say I'd go with whipple 1000x over before going kb I am NOT A fan of kbs lol. They're basically toaster ovens. The new 3 liter is really great and your 2.9 is making some damn good steam no doubt but I'd bet money a tvs could make comparable power give or take on a similar setup.
@nickmacias00
3 жыл бұрын
What throttle body would you recommend for a ported Eaton build?
@Intervention302
3 жыл бұрын
I ran my factory one up until I went Accufab on my Whipple 2.9
@ilsl04
3 жыл бұрын
@@Intervention302 Does your Accufab go to WOT to easily
@rnginu59
3 жыл бұрын
Did you run the vmp on your car at all?
@Intervention302
3 жыл бұрын
Sold it while still new in box and got 15% off the Crusher Gen 4
@rnginu59
3 жыл бұрын
@@Intervention302 10 4, thanks for getting back to me. Love your videos man!
@NextLevelTruth
3 жыл бұрын
Call me a newb, but what does twinscrew mean? Is that a super charger slang lol. My buddies Instagram name is that.
@mrdavis3298
2 жыл бұрын
Your all good, it is in ref to superchargers. Gotta learn someway!!
Пікірлер: 38