Ciao Daniele, tutte valide e veramente a costo zero, ma lo spellafili è diabolico! veramente ottimo! più semplice di tutti quelli in commercio e più sicuro di un coltello sguainacavi senza contare che con le forbici da elettricista se non hai la mano spesso si tagliano dei trefoli! ciao e ai prossimi video
@DanieleTartaglia
4 жыл бұрын
Grazie Zola, il taglierino l' ho creato li per li, non avevo un' idea ben definita, mi è venuta mano a mano che lo costruivo visto che, se lo dovessi rifare adesso, lo farei molto più funzionale.
@zolatanaffa87
4 жыл бұрын
@@DanieleTartaglia beh posso dirti che è veramente un bomba così... se magari hai voglia di fare un upgrade sarei curioso ci vedere cosa ci aggiungi, ciao
@paolociravolo6867
4 жыл бұрын
Queste idee sono OTTIME, FAVOLOSE!!!!👍👍👍👍👍
@Derakkon2
4 жыл бұрын
I think your definitions of simple and no cost are completely different from mine. For one thing, with the cost of all the tools and hardware needed to make these DIY tools, is it really that out of reach to just buy the actual tools needed to perform those functions? That being said, I do admire your ingenuity.
@justalonglivednoob
4 жыл бұрын
The first 2 are real life hack if you ever done those work. They need special tool to be done, but screw and wrench are way too common, so if you're not a worker who already have those tool lie around, you don't have to buy those tool just to work it out on some hole in your house. And yea, it'll definitely save you some bud if you buy those tool just for 1 time use.
@charanjeetsingh5067
4 жыл бұрын
@@justalonglivednoob all
@suryas6429
4 жыл бұрын
I agree. Not all DIY; in fact, about 90% are being done with all modern tools. In any case, the efforts and ideas are appreciated.
@enricotosco
4 жыл бұрын
Fatti! Bravo siamo compatibili....
@anonuser2640
4 жыл бұрын
All of them are the best but third is super
@robertoroybal791
4 жыл бұрын
Muy..pero muy ingenioso. Gracias por compartirlo. Saludos de Uruguay🇺🇾 Roberto...un viejo apasionado de la mecánica y las motos.
@MacStrange
4 жыл бұрын
Davvero belle idee originali, bravo e bel lavoro. Con il bullone forato ho avuto un bel flashback tra i miei ricordi felici. Un caro saluto. Ciao Daniele
@DanieleTartaglia
4 жыл бұрын
Ti ringrazio :-)
@facavocemesmo1323
4 жыл бұрын
Hi!! Very good tool!, Congratulations, Carlos Alberto from Brazil
@cesareabbate7436
4 жыл бұрын
Grande Daniele sei il numero 1
@jhonrg5405
4 жыл бұрын
La mas inspiradora pagina. Saludos desde Panamá Big Fans.
@tylerbennetts8079
4 жыл бұрын
3 simple easy to make useful items. The best video like this I've seen for ages, thank you.
@matiasreincheski5268
4 жыл бұрын
Un clásico , no nos deja de sorprender... muy interesante vídeo , sin comentarios....
@JoshuaRilliet
4 жыл бұрын
The last tool is very good, i think i will try to do something identical👍
@commonb
4 жыл бұрын
Just use pliers.
@marko176schneider5
4 жыл бұрын
Super ❤
@ihsanmuhammad8003
4 жыл бұрын
This is brilian idea, good job
@GURUNADHARAOBVS
4 жыл бұрын
All 3 tools are good.
@r02g
4 жыл бұрын
I watch you from Iraq ❤️ You are awesome keep going ❤️
@luigialbino9263
4 жыл бұрын
Ottime soluzioni ! Grazie Daniele ....
@tayebcherfa6648
4 жыл бұрын
Merci pour vos nouvelles astuces. Bonne continuation et à très bientôt.
@user-hb9mz2hp2g
3 жыл бұрын
isolation removal tool is fantastic !
@javiersanchez43
4 жыл бұрын
Simplemente, sensacional, felicitaciones por tu canal
@marko176schneider5
4 жыл бұрын
Super Video.Danke!
@rodrigodanieli4309
4 жыл бұрын
Bellissimo lavoro! Idee semplici e buone. Congratulazioni!
@lucareghellin
4 жыл бұрын
Bravo!
@sepbarokahsuposo3979
2 жыл бұрын
The last solution to tricky .. better use cutter blade directly .. for no 1 and 2 I agree good solution.. thanks for share
@eliaszogaib3714
2 жыл бұрын
Muchas gracias desde Nicaragua
@davidbrunelli6795
4 жыл бұрын
Creatività e precisione. Davvero molto bravo
@DIlic-iz9tx
4 жыл бұрын
BRAVO PRIJATELJU.
@xavipro9570
24 күн бұрын
Muchas gracias por el video thanks for the video
@LordBionik
4 жыл бұрын
Very smart daniel 👍🏻
@PhilippusCesena
4 жыл бұрын
The last is awesome
@vadegdadeg
4 жыл бұрын
Ножик для снятия изоляции очень понравился!
@romanabbasov4597
3 жыл бұрын
Great tools.thank you so mutch...
@TheSimpson73
4 жыл бұрын
WoW grande!!! Bellissimo lo spelafili, meglio di quelli in commercio!
@TechsScience
4 жыл бұрын
The last one is quite useful
@suryas6429
4 жыл бұрын
Last idea was impressive.
@radnazona3979
4 жыл бұрын
Top top top.... Amazing.. Thank you Super si, najvise mi se svidjaju stvari oko lemljenja, fluksa i sl. Lemilica T80, tinol zica.. Pratim te doveka. Hvala ti.
@fabrip4682
4 жыл бұрын
Top job come sempre; utili e raffinati. Grazie.
@coskunmustafa7440
3 жыл бұрын
gercekten süper yetenek ve beceri takdir ediyorum
@allenberryhill6118
4 жыл бұрын
Useful! Your genius is my favorite subscription. Allen, U.S.A.
@shrikantjalihal1544
2 жыл бұрын
Excellent Danielle
@dailybread7638
3 жыл бұрын
Bro. You are geneous. It's excellent, superb idea. Its a innovative & very useful tool. I appreciate your brilliance. Wish you all the very best for the future projects.
@CreativeToolWorld
3 жыл бұрын
Nice creative ideas
@TechnoSAP
4 жыл бұрын
nice video
@scarafaggio84
4 жыл бұрын
Bellissimo, continua così.. sei il numero 1 in the world.
@lamacchinadeltempo5737
4 жыл бұрын
Fantastico amico, non capisco che gusto ci trovano a mettere i Dislike, non li meriti!
@DanieleTartaglia
4 жыл бұрын
Lasciali mettere, si vede che qualcosa non gli è piaciuto :-) Problemi loro, io non ci faccio caso.
@lamacchinadeltempo5737
4 жыл бұрын
@@DanieleTartaglia Qualcuno, l'ho preso anch'io, e sembrava strano, poi, ho un piccolo canaluccio, ci può stare... Vuoldire, che facciamo qualcosa meglio di loro, lasciamoli rosicare... Buona serata... Ottimo lavoro, comunque!
@andersonfelisdorioaraujo1931
4 жыл бұрын
Grazie per queste tuo vídeo.
4 жыл бұрын
The third diy it’s a great idea 👍🏼
@electronic7979
4 жыл бұрын
Good ideas 👍
@NivaldoVieira
4 жыл бұрын
excelente..
@coolmate7276
3 жыл бұрын
Very admiring!!! Really appreciate your hard work... 👍🏻
@tonycosta9891
3 жыл бұрын
Tronçonneuse télescopique
@pugalstech
4 жыл бұрын
Super idea sir
@3DIYOriginal
4 жыл бұрын
Awesome IDEAS !!! 😎👍🏻👍🏻👍🏻
@dipterixbig2418
4 жыл бұрын
Ingenious talented and very creative, great video Thank you for teaching.
@TubeUnderdeveloped
4 жыл бұрын
The cable stripper is really great. I will make my own later. Thanks a lot. Your work is always precise. Keep safe in Italia. Are you living in Italia?
@pavelgrygoryev1140
4 жыл бұрын
For me this cable stripper seems useless. I do same cable stripping with usual knife with trapezoidal blades. Same result, and faster. But I really like his ideas with rivets. Rivet guns are quite expensive, and if you need to install just few rivets this devices can really help you.
@wernerviehhauser94
4 жыл бұрын
I would like to disagree. The cable stripper works similar to some "professional" tools I own, and should work fine and keep your fingers safe (and also look better than my tools). The rivet tools, on the other hand, seem to work but are really slow. I own a couple of rivet guns, and normal rivets as well as rivet nuts only take a couple of seconds to mount using them. And they are not really expensive, for 20 to 50 bucks you can get some decent ones that save you a lot of time if you use rivets more often. If they save me a few hours of work, they've paid themselves off.
@TubeUnderdeveloped
4 жыл бұрын
Sorry, I am not familiar with rivet guns since I have not used it before. But for wire stripper, I have used some professional ones. It is really good of course. But for doing the thing in a different way, especially do it use your hand made tools it gives you some sense of accomplishment. Otherwise the invention channel in KZitem has no meaning existence. His work always precise even from small things. I like his work very much. Also I will Hacker his work in a different way. In fact, recently I have done one of them. Just begin. I am shamed my rough work compare with his fine art masterpiece. You can check here if you want to say no again. Thanks. kzitem.info/news/bejne/z4qsnoSFoHZpeaQ @@wernerviehhauser94
@pavelgrygoryev1140
4 жыл бұрын
@@TubeUnderdeveloped interesting idea!
@pavelgrygoryev1140
4 жыл бұрын
@michel777ification factory-made knife looks worse than this device? Hmm, interesting thought... Not agree! And if it you can not control the depth of cutting, maybe you just need more practice. Of course, I know about special tools "cable strippers". Yes, I use them when working in workshop. But, for portable use I prefer small and multifunctional tools which I carry in a small bag with me.
@davidch880
4 жыл бұрын
Ehi Daniele, buongiorno. Mi è piaciuto molto il tuo tagliafili / spelafili. Che idea assolutamente geniale. Grazie compagno. Dall'Australia. Ciao... :)
@marche5936
4 жыл бұрын
bravissimo come sempre!!
@leeleebinojer4517
3 жыл бұрын
Good shearing tutorial 🙏🙏
@stopmotionstudio1019
4 жыл бұрын
Super
@SergioGonzalez-vo3wx
4 жыл бұрын
Wow like my friend 👍
@leobrynn4171
4 жыл бұрын
Столько дорогущего инструмента, чтобы сделать дешманский заклепочный пистолет я еще не видел!
@FIXDIY
4 жыл бұрын
Good my dude
@bengkelku
3 жыл бұрын
Very good...👍
@jonnyshoestring9368
4 жыл бұрын
All very good ideas and yes the last was the best, Excellent!! May I suggest a slight change to the stripper/cutter, I would extend the blade so it was exposed at the end, then blunt the tip and possibly tape the top. Now you have a save pressure point to press the blade with. Of course my suggestion may be useless🗑
@tructieptinvui1248
4 жыл бұрын
Great job, good job, see you all
@maurizolibero9189
4 жыл бұрын
Ciao Daniele, very good this projects!😉
@tobydyes
3 жыл бұрын
Cool ideas keep them up
@robertoc4414
4 жыл бұрын
great!
@ultralyon7944
4 жыл бұрын
Grande, che percorso scolastico bisogna fare per fare questo?
@skyvojager
4 жыл бұрын
Quello che fa lui non lo insegna nessuna scuola, è un dono che se lo hai sei molto fortunato...
@TanvirKabir0461
4 жыл бұрын
Great 👍
@barry-cq4xg
3 жыл бұрын
clever and imaginative. great video.
@King-Merlin
4 жыл бұрын
👏👏👏👏👏👏 cool idea
@malinoisattack
3 жыл бұрын
Super Einfälle meinen Respekt!!! Weiter so 👍 💪 🇩🇪
@sergiosandragarciagarciare602
3 жыл бұрын
Top demais suas ideias
@tibany5
4 жыл бұрын
Really? Do have all these tools but not revit clamp or wire stripper? WOW man
@ritchie65
4 жыл бұрын
You really didn´t get it. I think he has more tools than a hardware store. He just give you examples to save money and build such tools the easy way. Stupid idiot!
@marcolin2249
3 жыл бұрын
che bell'invenzione quella dello spella cavi!
@idealumchihuahua578
3 жыл бұрын
el rivet se ve que no es tan duro, de que material es o como se pide, hay de varios materiales y cual usaste? Gracias
@jitendra5012
4 жыл бұрын
all 3 are super , pls change topic to revetting for simplified youtube search
@TheSpecialsCaos
4 жыл бұрын
Seguo tutti i tuoi lavori con estremo piacere, bravo Daniele! P.s.: l'ultimo lo farò anche io 😊 non tanto per i cavi di piccola sezione, io lavoro spesso con cavi più grandi
@DanieleTartaglia
4 жыл бұрын
Infatti, ne voglio fare uno più avanti anche per quelli :-) grazie comunque
@CreativeHRM
4 жыл бұрын
wow
@jedhatcher252
Жыл бұрын
What was that first thing called? A nut sert or something? Where do you buy those?
@mahmoudajjan466
4 жыл бұрын
Woooow, thanks dude for sharing this video with us, and the last idea is the greatest, thank you again.
@yahyaa1
4 жыл бұрын
Excellent photography
@widicahyono5028
3 жыл бұрын
The best one... love it
@joseantoniosilva5521
3 жыл бұрын
Muito bom gostei valeu
@umberto9438
4 жыл бұрын
Maestro.
@eltonreis463
4 жыл бұрын
Great. Chariots of Fire, Vangelis?
@rameshnankoe7757
4 жыл бұрын
Great video. Thanks
@smartphone9828
4 күн бұрын
il rivetto filettato funziona anche in un foro cieco, ovvero ha una buona tenuta, riempie uun foro poco largo all'estremita? ci sn anche misure piu lunghe, tipo da 1 cm o circa? grz
@369Eletricidade
4 жыл бұрын
Muito bom, Good job.
@zakariamimouni9394
4 жыл бұрын
Very helpfull idea thnx Daniele
@lucasdetex8703
3 жыл бұрын
No cost solution indeed, but you need to have a grinder, a 3 types of vise, a vertical drill, a belt sander. OBS: I'm just beeing sily, don't take it serious.
@tony001212
3 жыл бұрын
this is only as educational purposes, wire stripper are really cheap, so not point in doin one yourself.
@freespirit7279
4 жыл бұрын
Dany ma il bulino a scatto dove lo trovo?
@DanieleTartaglia
4 жыл бұрын
Su banggood, lo trovi nel video che ho pubblicato un po di giorni fa
@cyberspider78910
3 жыл бұрын
Threaded rivetting is ok, wire cutter ok but for simple rivetting , buy a manual rivetting plyer....it will be easier than buying a drill press for making a fine hole in a bolt....!!! lol...Excellent work ideas though..
@waheedchanna1494
4 жыл бұрын
Nice tools
@zeljkodzunja
4 жыл бұрын
Hello, can you tell me, what is the diameter at the top (flat part) at 12.4 mm countersink drill bit ??? Thank you ...
@sinanates9635
4 жыл бұрын
You arso beitiful
@ErCapoAlex
4 жыл бұрын
Sempre originali
@karm4vitch918
4 жыл бұрын
This is awesome n helpful ..thankz for sharing this bro ✌😊
@wilsonwagner2302
4 жыл бұрын
Perfect.
@coolmate7276
3 жыл бұрын
Can you make a video on how to make Honey Comb design Grill on Acrylic without using CNC Machine?
Пікірлер: 201