Awesome idea. It is similar to how the big box stores do it. When I empty a box, I tear the label off and keep it in the cup holder of the truck to remind me I need another box. 👍
@TheHonestCarpenter
3 жыл бұрын
I used to do that exact same thing, Sgt! I’d be carrying them around like trading cards 😂
@bengoolie5197
3 жыл бұрын
Again, O Honest Carpenter, you speak words of wisdom. Many thanks.
@theresak4343
3 жыл бұрын
Being someone who has to read everything, I do this naturally, but not as organized! Good to know I'm doing something right!
@Jay_the_Caffeinator
3 жыл бұрын
Same here. I still have boxes from the last 20 years. It is nice to know what size I need.
@MRrwmac
3 жыл бұрын
I use the boxes they came in also but I’m a deep enough drawer to put the boxes on end and read the end label. Same concept and works great for me . Thanks for showing others.
@habbadabbado5765
3 жыл бұрын
Really like that idea if you can afford the space -- well done McGyver!
@johng.4959
3 жыл бұрын
Great idea! In fact, I always emptied my supplies into bins (as shown) and it makes no sense in reality! I love the idea that is proposed! Thank you!
@scottroy6195
3 жыл бұрын
Woodworker mainly rather than carpenter. I like having them in a case with a variety of sizes. Don't use many different types. But can see your way working if you have that many types too.
@JohnD-JohnD
3 жыл бұрын
I built a 20ft workbench several years ago and designed drawers into it.. The drawers are perfect depth to store boxes of screws, nails, etc.. Works great. Yes, I keep them in their original box for the same reasons mentioned, real easy to see what's inside, length, etc..
@johnstran
3 жыл бұрын
I like keeping It in original box and using clear packaging tape for tape support. Clear is better.
@habbadabbado5765
3 жыл бұрын
Much cheaper than painters tape too
@mr_tom_1_0
3 жыл бұрын
Yeah big +1 on that. Get the heavy duty shipping tape (e.g., Scotch), not the chintzy flimsy stuff. But even that helps, a lot. BONUS: you can run it across the top to fix the flimsy cellophane window falling off when it comes unglued.
@HBSuccess
3 жыл бұрын
100%
@waynesligar5948
3 жыл бұрын
I've always keep them in the boxes they came in for the same reasons you talked about but now that i can't work anymore I've got so many nails and screws and all kinds of other products i guess I'll have for a very long time. Please i hope 1 person will listen to this, get help when lifting heavy stuff, i hurt my lower back bad enough the doctors can't do anything else to help me so i live in extreme pain every day. Yes i know there are people a lot worse than me and i know God has a plan for me, be safe and always be respectful to others
@Andrea-bw8xm
3 жыл бұрын
Sorry for your pain, Wayne. Many years ago I did some serious damage to my lower back...heavy lifting improperly...but I was lucky. I preach to all the hard workers all the time about proper lifting techniques as well as insisting on using another person on the awkward heavy lifts! There's nothing better than staying strong and pain free. I feel for you!
@DCS026
3 жыл бұрын
Oh my gosh. You have just solved a huge problem for me. I still have them in the boxes, but not a dedicated tray, which I will jump on tomorrow. Thank you.
@banto1
3 жыл бұрын
Best is plastic ice cream tubs. They stack well, easy to label with a sticker on the short side, ... and make a great excuse to buy and eat more ice cream.
@penjon
3 жыл бұрын
I keep my screws/nails in their original boxes for the most part, but I also have a container which has a handful of each of my most commonly used screw sizes that I hang on my pegboard next to my drill/driver. Plus a couple containers for miscellaneous loose fasteners.
@AmosLee2613
3 жыл бұрын
I store my nails and screws in the original boxes on an 8" shelf mounted to a wall. Instead of the painters tap, I use clear packing tape when needed. It is a little higher cost, but far stronger, and the contents of the box can be read.
@eggsngritstn
3 жыл бұрын
Ditto.
@christopherrto
3 жыл бұрын
Clear tape is an obviously better option. I don't think it's more expensive though, is it?
@eggsngritstn
3 жыл бұрын
@@christopherrto Depends. The cheap 2.5 mil tape, no. The longer-lasting 7 mil type, yes.
@AmosLee2613
3 жыл бұрын
@@christopherrto The way my wife yells when I touch her packing tape, I figured that stuff must be expensive. It holds better than that blue tape, and I need a lot less of it than the amount of blue tape used in the video.
@christopherrto
3 жыл бұрын
@@AmosLee2613 Regular packing tape is only a buck or two a roll. The stuff at the dollar store works fine. The most expensive clear tape I have, tuck tape clear repair tape, is like $10 a roll, so it's kind of pricey. But good painters tape starts about $3 for the wide.
@danielwhittles1393
3 жыл бұрын
I’ve been putting off building a storage area for all of my nails and was definitely going to transfer all of the nails into plastic storage bins. Now that I saw your video, I’m keeping them in their original boxes and building shelves as you have showed.
@mitchjohnson4714
3 жыл бұрын
Procrastination pays!
@SteveSilverActor
3 жыл бұрын
I like to throw them all together and search for the right one when I need it. It's like playing Where's Waldo every time I need a fastener. Keeps things fun.
@ljevers
3 жыл бұрын
Been doing this for years, my job has our family move often-- typically less than 1 year at a location, that forced me to think about both storage and space I keep about 80% of my most common fasteners in a toolbox in their original boxes, just grab the tool box when I go to work on a project and they are already labeled Love the tip of using tape on the boxes, I have been using metal duct tape on mine because it doesn't degrade over time on boxes that I don't access very often (like masonry nails) Great chanel, great tips, love that you are straight forward on what people really need
@dougsweldingfabrication953
2 жыл бұрын
I agree. Everything is labeled and it takes the same amount of time to wrap some tape, as it does to put them in another container. Great storage idea !!!
@lesliemccormick6644
2 жыл бұрын
I’ve always kept them in the original boxes for every reason you just shared! Glad to see I’m not the only one - thx for more handy, common sense advice keep it coming!!
@vincentwesolowski459
3 жыл бұрын
A great common sense approach to storing all of your nails and screws. Thank you.
@DudeSawdust
3 жыл бұрын
There is so much useful info on those boxes and I can't remember everything I want to know just by looking at any random fastener, so the box is what I do too. Thanks for confirm a great idea that I have already been doing too.
@TheHonestCarpenter
3 жыл бұрын
Exactly, Dude! I’ll probably do a video just on box info someday-gauge, length, coatings-it’s all right there where you need it. Impossible to transfer all that stuff to labels.
@DudeSawdust
3 жыл бұрын
@@TheHonestCarpenter you should come up with a video what to do with all of the miscellaneous fasteners. That’s an even bigger problem for a lot of us
@felixf5211
3 жыл бұрын
Couldn't agree with you more. I've been watching organization videos in hopes of bettering my setup. I work with metal and have a couple of hundred taps and countless drills, not including fractional, metric, wire gauge, and letter indexes. At this point everything is organized in one large toolbox drawer in the original packaging as often as possible. I do like the shelf you built. Makes a lot of sense with wood screw boxes. At this point I'm coming to the conclusion that bettering my own setup for efficiency isn't easily done. Enjoyed the video. Thanks!
@rodalm1694
3 жыл бұрын
I have recently started using food storage containers in my garage, they are fantastic. I don't buy the super cheap ones because they become brittle. I get bundles of 3 for less than $3 and store nuts, bolts, screws and anything that will fit. The best thing is most of these containers are made to stack and they become a great space saver.
@strixt
3 жыл бұрын
Great idea with the tray shelf! I think when I build one I'll put it just above the workbench, but have it less deep than the cabinets above so it doesn't restrict the work area. Thank you!
@melissastroud9238
3 жыл бұрын
Being a beginner with very limited storage, I use a divided carrier and put the screws in tall snack size zip lock bags. I either label it or cut off the description from the box and stick that in the bag as well. I plan to modify a small 10x12 shed into my work/storage space after I get it leveled and start planning the space. But right now, my fasteners live in my bedroom.
@debbiekerr3989
3 жыл бұрын
My uncle Al used a lot of fasteners, and always kept them in box storage, that is he kept them in the box. The ones that he used most often would be in jars with the lids nailed to the shelf.
@lauralewis5129
3 жыл бұрын
When possible store boxes on their side instead of on top of each other...easy in and out. I like putting mine in empty medicine bottles and tape one nail, screw, etc on outside when possible. Works great for me and fits easily in my pocket. A wrist magnet is useful while working. Since you have such a grand "operation" going on compared to me as a homeowner, "you did good" (local expression). I learn lots from your videos. Thank you.
@TheHonestCarpenter
3 жыл бұрын
Thanks, Laura! Taping on a sample fastener makes all the difference in that case. That way you don’t have to squint and speculate 😅
@doordoc35md
3 жыл бұрын
Packout works wonders
@kmwrites7456
3 жыл бұрын
@laura lewis: I just started saving my medicine bottles to put small items like washers and nuts in .
@gerdberg4188
3 жыл бұрын
Medicine bottles are not big enough they don't hold a whole box of fasteners
@marshallkatz8615
3 жыл бұрын
I have been doing that for 50 years. Nice to see someone else thinks storage stuff is a waste of time and money!
@jeanine6492
3 жыл бұрын
Great idea IF you buy in bulk, but as a smaller builder and fixer of things I often only buy the small pack so I find three organisers with adjustable size bins inside works great. 1 is for screws 1 for nails and one for bolts etc. I cut out the size off the label and that sits in the bin on top. Very easy to see what you have and don’t have I find.
@chriscolameco6850
11 ай бұрын
Horrible idea in bulk I buy 25-50lb tubs. I save the tubs but transfer into the ridgid packout organizers based on application. (Exterior, drywall, structural, ect)
@anthonylau3065
10 ай бұрын
What a great idea to organize separate parts organizer for screws, nails, bolts, etc, instead of haphazard as I have been, since I have plenty now than I did several years ago.
@paulsmith9341
3 жыл бұрын
Thank you for your channel. I don't work anymore after 40 years of some form of construction. I accumulated a lot of bits and pieces in that time so I have to organize it I'll never find what I need when I need them. I also keep the pound boxes of screws and nails. I use those heavier cardboard display boxes from the grocery store and put the pounders on them, then on a shelf. I keep all those little ziplock bags that hardware from the stores come in now days for small amounts of hardware. I punch a hole just below the zipper and hang them on a pegboard. I also like clear plastic jars as they don't break and can instantly see what it inside. Lastly I still use steel coffee cans for larger hardware that won't fit in in any of the other method. Keep up your great work. I find it helpful. Thanks!
@jimf.625
3 жыл бұрын
Great advice. After years of organizers, trays, etc. I just keep them in their original box and have a dedicated shelf to stack them. I dump the contents and reinforce the inside of the box by re-lining it with some thick card stock. Just trim pieces to go around the interior sides and then the bottom and spray glue them in. I know it's a little extra work but you now have a heavy dury box clearly labeled that will.last many years. When I get additional screws or nails I just replenish the same old box.
@toms9738
3 жыл бұрын
took me 20 years to figure this out. i built a 2' x 4' shelf unit for the boxes. so easy. 👍👍
@rickpouley2857
3 жыл бұрын
Great idea for sure. I have always taken the screws and nails out of the boxes and put them into containers like you showed. This makes perfect sense. You can tell exactly what you have with sizes etc.
@dscritter614
3 жыл бұрын
I am a 66 yr old woman who is just getting started with tools. I swear I was just wondering how 2 organize my accumulation of nails/screws. DUH! Leave them n the damn boxes. GENIUS!
@davidahart2476
3 ай бұрын
I've been thinking the same thing, I have a several fasteners that my dad just bought loose, I've been using metal coffee cans for them, but the ones that are in the box, I'm just going to leave them in the box.
@eggsngritstn
3 жыл бұрын
I use the original boxes for the same reasons. I simply won't take the time to create and label a system that I won't bother to update as I add things. I like your shelf location. I currently have mine in two of the deeper drawers of my mechanics rolling tool chest.
@user-em6ie2be7x
3 жыл бұрын
I typically sort my screws in The plastic bins of my toolbox since I typically use 4 to 4 1/2 size screws. But next time I run out I'll keep the box for any screw I won't need. Thanks for the Video!
@sunkissie24
3 жыл бұрын
So happy I found your channel. I live in an apartment but your tool tips video was awesome and really helpful. Would you be able to do a video on the minimum basic tools an apartment dwelling DIYer and a homeowner should have that can help them with small jobs they may need to do? Also what to look for in a toolbox/bag? You explain stuff so well I would love for you to do a video and mini explanation of this. Thank you again have a wonderful day.
@mountainmanmike8383
3 жыл бұрын
I don’t have a shop and work out of my station wagon. I use the craftsman container and absolutely love that system.
@ItsAsparageese
3 жыл бұрын
I sorta kinda have shop space in my storage unit but mostly work out of my Ford-Explorer-home. Gonna build an attached folding-out standing desk/workbench for it soon! Got any tips for the vehicle-based shop? I finally beefed up my solar power system's inverter so that I have the wattage to run power tools now, so I'm going to be building in some storage space soon for tools and hardware, would love any of your ideas!
@darkllil
3 жыл бұрын
The big plastic 9 container is the best for me. Easy access to multiple size, perfect for DIY you take the minimum quantity of multiple size and keep the left over in a special place. Keep them organize by category. Outdoor screw, indoor screw, indoor nail, and galvanize nail, and an other set of finishing gun nail. Little tips: take those from homedepot hdx. Cheap, fit perfect, small and low profil. Of course if you are a framer you take the big cardboard box. Oh and easy to carry.
@julesberglund880
Жыл бұрын
This is exactly what I am creating in my reorganized workshop, right now. I got the Husky containers and planned to label them exactly as you described. I'm actually on my way to get more containers, tonight. Label the outsides of the containers on all four edges, and easy to see all content from the top. I love his idea of keeping them in the boxes, but two things work against me on that: 1. the mass majority of my screws and nails are a mixture of things I've accumulated over the years, and the boxes no longer, or never did, exist. And, 2. most of the stuff I get isn't in the bulk boxes. So, I think the 9 container tray system will work best for my needs.
@jcricket1001
10 ай бұрын
I am trying to organize all the misc. fasteners and whatch-a-ma-call-its that I have accumulated from my parents, step-dad, and myself into the multiple boxes in one plastic containers. I first bought these organizer containers from Home Depot and Lowe’s. But I finally found that the same clear multi-use organizers are much cheaper at craft stores, dollar tree, etc. My problem is knowing how to categorize and label them. Thanks for your tips on categories. Do you or anyone else know of a website or book or somewhere I can find more lists or categories and sub categories and labels? Also, how to find out what are names, sizes, etc., of all the whatch-a-ma-call-its or hoo-didy-whatch-its or whatever y’all call them? :) Thanks!!!!
@scotthughes29
3 жыл бұрын
Totally agree! All my screws and nails are still in there boxes. Nuts and bolts…in bin storage…but keep those in boxes as long as possible.
@jean-paulramjattan1920
3 жыл бұрын
Just started getting into woodworking and your videos have been a great help. Thanks man! Your intro music rocks too 😁
@joeladam742
3 жыл бұрын
I keep all my fasteners in the original boxes also. I store them in a dewalt organizer box that is just high enough so the boxes can be stored on their side with the fastener description showing. That way when the pack out box is opened I can easily grab the box I need. It is an easy way of moving a lot of fasteners from the shelf to the workbench or to outside the workshop . Thanks for doing the videos, I find them very helpful
@omnarasi9637
3 жыл бұрын
Yet another invaluable tip from the Honest Carpenter. I was wondering how I should handle something like a dozen screw/nail boxes efficiently. Now, I am going to build a (smaller) tray shelf. Thanks, HC.
@billb.2673
3 жыл бұрын
100% agree. Bins absolutely suck. Stuff is always cross pollinating across the bins and you end up spending way to much time reorganizing and relabeling.
@TheHonestCarpenter
3 жыл бұрын
So true, Bill 👍
@seanhiscock
3 жыл бұрын
Sometimes, the simplest ideas are the best. Thanks Ethan.
@1monagale
3 жыл бұрын
As I build a van conversion, tool storage and screws have become is a priority. Great ideas! Thanks 😊
@johnvodopija
3 жыл бұрын
That make perfect sense to me. Unfortunately as a DIYer I don’t use the quantities to buy boxes of 100+ at a time. Most of the hardware I buy is in odd shaped plastic packaging designed for hanging. My different sized brads stay in their boxes but the odds and ends are in hardware cases. Keep up the great content . Cheers 👍😎🇦🇺
@_J.F_
2 жыл бұрын
I always keep my screws in the box they come in for the same reason you mention in this video. I don't use that many nails, and have an organizer box with a clear lid for the most common nails. Nails for nail guns I keep in their original boxes. I have drawers under half of my workbench, and I have made two of them up to hold my boxes of screws and nail gun nails/brads, with a sliding tray to allow for two layers and making the most of the depth of each drawer. Seems to work fine and being drawers I don't get saw dust in my boxes, which seems to be the case with everything else that is stored on shelves.
@1DangerousTripod
2 жыл бұрын
Totally agree, I have used this method for 20+ years! Mainly because I'm cheap and couldn't bring myself to buy a "box" and throw away a perfectly good box.
@danalaniz7314
3 жыл бұрын
Great video. I recently started keeping my nails and screws in their boxes as well. It made a big difference today when I finally cleaned up my work bench.
@tomhostetter8516
3 жыл бұрын
Simple idea and that's how I've stored my screws for years, I don't use nails much but I recently bought some storage containers from Harbor freight and found that the kreg plastic lids fit over the top of the containers in the main box so all my kreg screws are now in one container
@olderendirt
3 жыл бұрын
The tape is a great idea. I think I'd use clear, but it will be helpful for lots of storage situations. Thanks!
@johnnybear111
5 ай бұрын
I agree. I bought big containers of every size of drywall and decking screws and i have two assorted containers for each to put in my trailer
@ronadkins8997
3 жыл бұрын
Very helpful video, a simple solution to a organizational problem! Thank you! 😊
@PeteLewisWoodwork
3 жыл бұрын
In my 40+ years of being a UK Carpenter, I have always used the same system I learned as a trainee - use the box. Keep nails and screws separate. We always use more different sizes of screws than nails, so screws are ordered in length first and head second - so, a 2" x 10 will come before a 2" x 8 and so on. When it comes to small sizes, when it is more difficult to guess them, we tip the box on-end to show what they are. Most boxes come in standard sizes and the system works as well as it can. When you learn and become fluent with your own system, you know exactly where to go for each size.
@NWGR
3 жыл бұрын
I definitely prefer to sort into bins. With all the hardware I have personally, there's quite a few different box sizes. In fact, that was the main factor in me choosing to sort them in bins. With a couple of bin sizes, I have all my storage needs handled, and organized. Still a great tip if all the hardware you buy is in the same size boxes.
@MelbourneAlan
3 жыл бұрын
i believe in a hybrid aproach. i use a dewalt toughsystem organiser for each fasner or fixing type that i use on a regular basis , like screws, brackets, stainless screws, electrical clips, plasterboard fixing etc. this way i have a selection i can bring and it will do most jobs. its great to have that small bit of each type there in case you need them. then i have 40 feet of shelving that i store all the boxs . bringing the box is great if your doing a decent size job and you will use loads. its amazing how many boxs of screws and fixings that you accumulate over time.
@grammyspa-jammies1737
3 жыл бұрын
I've been using the box storage system for a few years now. I have recently started using clear plastic bins to transport several boxes at a time. Great video for newbies.
@theUntouchables96
3 жыл бұрын
Always kept nails and screws in their boxes! Love the table/tray shelf!
@jimaronson2323
3 жыл бұрын
I actually started doing exactly that way a couple years ago. I hated sorting through misc screws, nails, bolts, etc. just to put them in a bin/tray. My issue is having the space to store the hardware boxes, so my inventory is less than what I'd like. Great idea. Keep us updated on what you're building in the shop.
@TheHonestCarpenter
3 жыл бұрын
Thanks Jim! More coming soon 🙂
@pops71
3 жыл бұрын
Great idea and video.I think clear packing tape would be even better than painters tape.
@ItsAsparageese
3 жыл бұрын
I'd say it depends on the tape quality and how much longevity you want from it, depending on how fast you go through the fasteners. A really good clear packing tape may last longer than a super cheap crappy painter's tape, but really any packing tape (even a cheap one) will generally cost more to begin with than any painter's tape (even a good one), and especially in sunlight over time most packing tapes will get brittle and peel. Both create a nice water resistant barrier that holds firm. I'd roll with (ha) painter's tape because it's just cheap abundant stuff that's good to have around, lasts plenty long even in sunlight if it's not the ultra cheapest brands, and you don't need a ton of extra strength for this purpose.
@tomgio1
3 жыл бұрын
I just appreciate that he refers to the channel/episodes as The Honest Carpenter Show. The “show” part is a nice throwback term to a TV show, even though this isn’t one. IDK, it just lands well with me.
@AutonomousVII
3 жыл бұрын
Throwback term, man you’re making me feel old 😆…
@rogerlafon6717
3 жыл бұрын
I completely agree with storage in the original boxes. That's what I do, always have, and will continue to do so. Straight forward, simple and they flat out work with no added expense with the flimsy bins. The old KISS method at work: Keep it Simple Stupid. Works for me. Thanks for bringing it up. Nice refresher.
@MoranGuyVideos
3 жыл бұрын
Sometimes the screws sells in a plastic naylon bag...not a box. Especially if you not buy a huge number from local hardware store. I found those divder boxs for screws are good. You can categorize them. Like pocket screws, nails, wood screws, botls , washers , etc. As home owner / hobbiest qoodworker its perfect.
@juststephen93
3 жыл бұрын
I always have a hard time with garage organization, particularly when it comes to products/materials (like screws and nails) that are accumulated in such vast quantities and varieties. Your solution is so simple but makes perfect sense. I would love to see some more organization content like this. Thank you.
@trep53
Жыл бұрын
BTW you may be the only KZitem creator advocating using the original boxes, but I agree with you. My first effort to organize hardware was using the original boxes. I then went on a quest to figure out a “better” storage box but was put off by the price and inflexibility of the boxes. Not to mention storing the storage boxes! For me a simple eye-level shallow shelf to line up the hardware in their original box is best.
@henryskinner1092
11 ай бұрын
I have been saying this for years. Thank you Sir.
@TheHonestCarpenter
11 ай бұрын
👍😁
@woodworksbygrampies1284
3 жыл бұрын
I'm super glad you made this video, I actually thought I was alone with the painters tape trick. I can tell you that this really works and "replenishing inventory" is a breeze. To see and hear this from a Pro like you put a big smile on this grumpy old man's face. Have a good one :D
@garykorzelius5930
3 жыл бұрын
I have been using bins for a long time. Bur now, I will be using the box method it really does make a lot of sense, I just never thought of it. Thanks
@georgecasillas9182
3 жыл бұрын
You are right . I really like your idea . I do keep the boxes just need to build the storage cabinet. Thank you.
@mdunbar008
3 жыл бұрын
I have rarely EVER had a box survive until it was empty. I found some small clear plastic boxes with locking lids that were just slightly larger than the factor screw boxes that worked really well for ME. I will agree with you on it being a good idea to just keep them in their original boxes, provided you are not blessed with the talent for destroying them quickly.
@vane5736
3 жыл бұрын
Great idea, never thought of that. Great way for me to save space in a small workshop!
@davidkahler9390
3 жыл бұрын
I love the plastic boxes GRK screws come in
@TheHonestCarpenter
3 жыл бұрын
I’ve got a ton of those around the shop too, David
@tassie7325
3 жыл бұрын
I guess it comes down to your job. As a carpenter you use a tonne more fasteners than I do as a DIY type of guy. In my case I use segmented easy to carry containers that are dedicated to screws, nails, bolts etc. This way I can take the whole container to the place where I am working and be sure I have a variety of fasteners available for the task. The dedicated containers also hold the special tools needed for the fasteners ie the nail box also holds nail punches. The screws container has a variety of screw bits.
@bnrlabs5923
3 жыл бұрын
Having that variety with you at the work location is key to me. I kept them in the box for a long time but got tired of being working on something and finding I had the wrong fastener. Now I bring all the fasteners to the location and never don’t have what I need, unless I don’t own it at all!
@MrBrianDuga
3 жыл бұрын
I have spent way too much time thinking about this. I adopted clear acrylic containers I get from eating my favorite sauerkraut called Wildbrine. They fit snuggly into my tool pouch and I can reach into them with my whole hand. When I bend forward the container doesn’t fall out of the pouch and when I am done, the container gets pulled out of my tool pouch and back into storage. The tool pouch no longer becomes a catch all for a mix of fasteners. I pull the labels off and then rub the adhesive off with a mix of canola oil and baking soda. Then I use my label maker to put labels on the side and top. I love how clear they are not being glass.
@TrekTracks74
3 жыл бұрын
Like the custom cabinet great solution, 👍 much better than my 5 gallon bucket between the seats that’s now a sadistic finger grinder to stick your hand in 😁
@peteraldino3423
3 жыл бұрын
Definitely store in the boxes - Like you I've had some of the boxes for years, and they fit nicely in the lid of a printer paper box!
@kenn1936
2 жыл бұрын
Thank you for the fabulous tips. I will keep everything in their boxes, from now on.
@adamlaski9128
3 жыл бұрын
I keep most nails and screws in the box as well. However, I install a lot of cabinet doors and hardware so I keep a case I can carry easily into a job with small hinge fasteners, machine screws and some brads
@sparda169leon
3 жыл бұрын
Duct tape the inside of the boxes. Helps more than taping the outside. And you can still painter tape the outside when in rainy conditions. Though, since we deal with 1" + bolts more than carpentry, we use old coffee cans and a tool box with labels. I'll be making a spot under the workbench now tho for woodworking/"small" jobs. Great idea and thank you for this video :)
@TheHonestCarpenter
3 жыл бұрын
Good call, Sparze! I’ll try interior duct tape on the next go round 😄
@garymcconnell602
3 жыл бұрын
I store most of my fixings that are in my van in storage cases with clear tops but also put excess ones in a shelf at home then top up storage cases as when needed ..I find the storage cases better when out and about on jobs
@coburn_karma
3 жыл бұрын
I do the same, so much more easier to transport. Also, taped up the box after one of them spilled out everywhere. Common sense wins out this time.
@TheHonestCarpenter
3 жыл бұрын
The taped box is eternal, Ollie! 😆
@firstlast4229
3 жыл бұрын
Nice elegant solution. Speaking of using tape for storage, I use big, cheap plastic storage drawers and wrap them in gorilla tape so they don't fall apart when you lift them.
@ColoradoTodd
3 жыл бұрын
Great video! I like the idea of using the boxes. I've done that myself, but I have to admit that it's a result of laziness. Side note: you gotta do something about the echo in your new shop! Maybe put something soft up on the walls or ceiling so the sound doesn't bounce... You could do one of those rubberized floors, but I always feared that would make it hard to sweep up.
@dalebabbitt6185
2 жыл бұрын
Good video!! I like taping the inside bottom of the box so no information on the box gets covered up.
@edover50
3 жыл бұрын
Good video Ethan, I’ve tried different methods over the years and find that modified pack outs with tubs are best for me. Pack outs give me the selection at a glance while on a job without having to read /search and the gallon sized tubs for specific jobs (drywall screws, deck screws etc.)
@rodcormier7428
3 жыл бұрын
Exactly... I've been doing that for years ... the boxes the nails and screw come in always worked for me .... I have 3 draws designated for my nails and screws and works for me .... thanks for the video
@Simon-kh2dd
2 жыл бұрын
Been doing it like that for some time. I keep a few in a carry box for moving about the house etc. But all the others stay in the box for exactly the reasons you say. I have even fixed the boxes on some because some suppliers boxes sort of fall apart once opened. I don't think there is a wrong way, as long as it works for you then its right!😁 I really like the long shelf idea, I may put one in but above my cabinets just above eye level Thanks, all the best. S
@bryanwelch766
3 жыл бұрын
If I have the box, your approach is great. Larger screws and nails from a garage sale or Restore go in a wide mouth plastic jar like those from peanut butter or pickles. Smaller stuff goes in a plano type plastic box with 20+ sections sorted by size and type.
@kentuckywildcat2592
3 ай бұрын
I was wondering where you were going with this.... and I agree WHOLEHEARTEDLY! The boxes are the way to go. My problem is the items that didn't have a box. I have a farm so, I keep every size nut and bolt combo so I don't have to run to town in an "emergency" repair situation. Now that is down to old labeled pickle jar.
@darrinwesterfeld8948
3 жыл бұрын
I always keep them in the box. For all the reasons you gave. Much better for storage AND retrieval.
@mickjager5974
3 жыл бұрын
I used to store all the left over odd ones together on a plastic box that was say 15"x 8" x 4" deep. Then when I needed to find a particular one I used a trick a co-worker showed me. Dump them out on a sheet of tough paper or flexible cardboard where you could spread them out into a single layer and see what you wanted pretty quickly. Then you could just pick up the paper/cardboard by the edges and hold it like a half funnel and pour them back into the container pretty quick and easy. My wife thought that was disorganized and so put them into several adjustable compartment boxes. But truthful I think the one big box and just dumping them out was easier and took up less room. For all the ones that I have a lot of the same kind I just keep in the original box and put all those boxes somewhat neatly in a large plastic box.
@philippebleau4809
3 жыл бұрын
Since you ask, I prefer your storage trick. Btw, I can’t wait for your new shop setup.
@BigTrainBuff
3 жыл бұрын
Good ideas to improve the life of the boxes.
@rukadorehosa3917
2 жыл бұрын
I like this idea a lot. I am in the middle of a shop remodel. I am going to try this. Thanks!
@stevekiss616
3 жыл бұрын
I tried numerous systems over the years, but eventually settled on storing the bulk in the original boxes. I do keep a working supply of the most common fasteners in a parachute bag for quick grab and go. I put the information tab from the empty boxes in the sections of the bag for reference.
@gilbertramirez4294
10 ай бұрын
You're right. I do that also - leaving it in the box, it helps identify the size and type when storing. I throw away the old broken used box and i get a new box when i purchase additional NAIL/SCREW.
@TheHonestCarpenter
10 ай бұрын
Yup, Same here, Gilbert!
@SteveMonk1956
2 жыл бұрын
I'm with you 100% always keep mine in the box they came in.
@PJSGBC
3 жыл бұрын
Fwiw, I put masking tape on both ands and write screw length in sharpie really big, so I do not have to see top of the box... also, memorize box colors of types of screws helps too... oh and store all same direction so you can grab and open without needing to look at box... good stuff on this one!
@angelafox4380
3 жыл бұрын
Keeping everything in their boxes makes sense!! Already labeled, ready to go!!!. Thank you for sharing your idea😉😉😉
@angelmunozjr
3 жыл бұрын
I use packaging tape on the bottom of those boxes so I can still read the side labeled information. And I just have more packaging tape than I do masking tape. Also I tend to use the packaging tape on the top part of the box when the clear part of the box is broken due to the high heat here in Arizona. It allows me to view what's inside of the box. When I get too much tape that actually seals the Box closed I just trim it open with a razor blade.
Пікірлер: 526