You got me into RC rock crawling and 2 years later I am still hooked haha
@RCReviewChannel
7 ай бұрын
So good to hear. Adds smiles to this life.
@tonsoffun49
7 ай бұрын
While I have had no issues removing the body, this is awesome, and will definitely help a ton of people out.
@RCReviewChannel
7 ай бұрын
Exactly, that is the goal. Folks with soft hands. :)
@Duke_Nuke
7 ай бұрын
Cool mods, but there are a few downsides that people should take into account. On the front the front tires rub a lot on the lowest position when crawling and barely rub at the top position. On the back, you can use the higher position to disable the lights. I normally run mine with the back all the way down so my lights work and the front on the higher position so the tires don't rub. The tabs have loosened up a lot since I got it. FYI, here's a cool light mod. On the body, move the headlight plug down one so it's in the DLR slot then move the brake lights into the headlight slot. The headlight switch on the remote actually has 3 positions. With the above setup, but turning it halfway you get the headlights only and going all the way gets you taillights also (you lose brake lights by doing this). As a future mod I'm going to replace the rear blinkers for some white LEDs and plug it into the back slot so I'll have backup lights.
@garybeckwith9045
5 ай бұрын
My system had nothing in the brake light slot. I had backup, which only works in the f/b/r dip selection. Not critical, just informing. I LOVE the mount mod, though.
@RCplamodel
7 ай бұрын
Your FMS FCX10 looks awesome and it's a wonderful wet adventure! 👍🤘👏 Many thanks for sharing that adventure! 🤠💯🙆♂
@RCReviewChannel
7 ай бұрын
Glad you enjoyed it
@Sir_crawls_alot
7 ай бұрын
This tip and trick is sooooo worth it. Thanks for sharing!!!!!
@RCReviewChannel
7 ай бұрын
You are so welcome!
@rayurena3789
4 күн бұрын
Could you do a review on the New RGT EX86170 PRO 1/10 brushless
@JN-qr4yt
7 ай бұрын
Is it possible to raise the magnet bed on the frame or lower it from the body so it'll still hold the rear end down in the "high" position? I clipped the rear tabs but still want to run it in the high position unfortunately lol
@Rcworldshop
7 ай бұрын
We like the struggle better then holes in the body ❤
@RCReviewChannel
7 ай бұрын
The struggle is real! Yeah, no way I'm drilling holes on my new green body.
@garybeckwith9045
5 ай бұрын
Thank you!
@Casitascrawlers
7 ай бұрын
Nice mods mine is a day away from arriving. 👍
@RCReviewChannel
7 ай бұрын
Can't wait! You are gonna be so stoked. Report back please.
@MegaTapout01
3 ай бұрын
Has anyone had issues removing the stock wheels? I removed the nut but it seems like the wheels dont want to pop off the axles.
@dutchbiker7874
7 ай бұрын
Really helpfull!😊👍
@RCReviewChannel
7 ай бұрын
Glad you think so! Really seeing the improvement in usability too on our end.
@dutchbiker7874
7 ай бұрын
@@RCReviewChannel That's a good part of the fun, love watching your videos🤗
@shelbycobra1580
5 ай бұрын
Pero no le queda el cuerpo del trx4 verdad?
@AaronWright-j8r
7 ай бұрын
Oh Snap!
@RCReviewChannel
7 ай бұрын
Snap-on!!
@collinbooker
7 ай бұрын
I would of loved this if they made this body swappable with the Fj40 body
@RCReviewChannel
7 ай бұрын
That's the hardbody I believe. I'm sure a lot of bodies are coming for this chassis this year. I hope that's one of them.
@HorslONE
7 ай бұрын
Does the TRX4 Defender Body fit it?
@RCReviewChannel
7 ай бұрын
Same wheelbase for sure. That body usually comes with wheel wells attached to the body so that needs to be removed. The matching wheelbase will make it possible IMHO.
@DoubleADay
7 ай бұрын
Defender is 12.8. I believe this body is 12.3
@RCReviewChannel
7 ай бұрын
This FMS FCX10 chassis is 12.8 inch as well.
@LEORedSun
7 ай бұрын
I don't have any problem removing the body. You just got to press and lift at the right place.
@RCReviewChannel
7 ай бұрын
Sure, that's what I do. The thing is, one has to do both at a time. Get passed the magnet, get passed the first notch, get passed the second notch. Not impossible but not obvious either for most.
@daijoubu4529
7 ай бұрын
Instead of cutting maybe just heat shrink the 1st notch so it slides over?
@RCReviewChannel
7 ай бұрын
I did try that but it wouldn't go in the chassis hole. One could bore out the chassis frame mount holes but I didn't try that.
Пікірлер: 40