Hi everyone! Let me know if you have any questions about this process in the comments below! :)
@noelpalapuz2390
4 жыл бұрын
Where can i find the subdivision menu? Nothing appears when i right click the plane
@TheCGEssentials
4 жыл бұрын
@@noelpalapuz2390 Are you in edit mode?
@noelpalapuz2390
4 жыл бұрын
I found it in modifier
@noelpalapuz2390
4 жыл бұрын
Sir why is bolean doesnt work to me. I find it difficult to figure it out.
@armadhanyprakawidhi8261
3 жыл бұрын
5:44 i only can select one, need help
@josephvanwyk2088
3 жыл бұрын
Been looking for this FOREVER, thanks!. Would love to see more of the tools been demonstrated in this way. Makes learning soooo much easier if you can see the "whole picture" of all the techniques.
@Maculata.
3 жыл бұрын
*t h a n k y o u*
@doobore
4 жыл бұрын
I have been looking for a tutorial that’s quick and well explained for so long, and yours is exactly that. Thank you man, your tutorials are great.
@TheCGEssentials
4 жыл бұрын
Glad it helped!
@levon024
Жыл бұрын
You are, by far, the best blender teacher on KZitem! Take it from a Noob with no experience in design. Through your videos, I get it!
@thefederationfiles8938
3 жыл бұрын
I appreciate your teaching style. Every sentence pushing the lesson to better understanding. I watch a lot of Blender tutorials and yours are the best.
@yootoobnoob1
3 жыл бұрын
The third way was what I needed. Straight and to the point! Excellent tutorial.
@TheCGEssentials
3 жыл бұрын
Perfect!
@wtrf22
3 жыл бұрын
Finally some who can explain this quickly and clearly.
@RafaelZavalaMotion
6 ай бұрын
I've been learning from the shadows not really commenting since I'm new to blender. I must say thank you for your videos. You really take your time to teach in a clear voice and explain the subject very well.
@thomasremastered6941
6 ай бұрын
The third method is just amazing ! I didn't even know about the boolean modifier, for me it's the easiest way.
@LovelyRavenBelly
9 ай бұрын
3yrs later and still saving the sanity of blender beginners everywhere!
@sdavies121
3 жыл бұрын
hay man im just an amiture blender user i find it very calming to play around with i love the content you have helped me out a lot i appreciate all your knowledge you share im creating things i didnt think i could in ways i didnt realise was possible im always getting stuck and trying to find other ways and new stuff to do Thank You
@KismetBP
2 жыл бұрын
Yet again a wonderful guide... The Bridge Edge loops totally just helped me do a cut out way easier.. Thanks! Much Love!
@GreenMagic0
2 жыл бұрын
Fun Fact: We love your cute dog in the thumbnails!
@000pdx
3 жыл бұрын
Thank you, known about booleans for 25 years but I didn't know you had to hide the object, learning the awesome features of blender and thanks to you ;)
@ZemiousKatarn
Жыл бұрын
Hi. Thank you for this video. Also, thank you for the way you don't expect any knowledge to already be learned in your videos, but you gently explain everything in a way that beginners and experts can listen to, keep up with, and not feel frustrated. I appreciate you and your channel. (Also, I know this is a 3 year old video, but this goes for all of them, so...)
@paulhoover5511
2 жыл бұрын
Great tutorial! Thank you for the clear, concise and informed presentation. All 3 options are very helpful.
@poetic0justice
6 ай бұрын
Gosh, thank you! This video saved my day. I was searching the whole day for a good tutorial and most of them wasn't what I was looking for (sometimes such old versions in which the layers were somewhere else and so on). The first technic did unfortunately not work completly for me, but the second and the third (those I needed as a beginner!). So thank you! This was a really great and super simple video, love it! Greetings!
@foxfoxy5220
3 жыл бұрын
I've been desperately looking for the Boolean Function, you saved me lot of sufference! really perfect video!! thanks again!
@TheCGEssentials
3 жыл бұрын
Glad I could help!
@pilotdawn1661
2 жыл бұрын
Thank you for these nitty gritty videos on specific functions! They are tremendously helpful.
@andreykhazhevskiy3230
Жыл бұрын
Select a vertex, ctrl+shift+B to bevel vertex. Set profile to 0.1 and increase the number so that it looks like a circle. Click ctrl+(-) , this way all the inside vertices will be selected, then right click and dissolve vertices. Then use extrude manifold. Or alternatively, select 2 vertices on both sides, follow the same steps and then instead of extrude manifold right click and bridge loops. This way you wouldn't have too much geometry.
@nutbunny10
3 жыл бұрын
That alt+shift+s function was very interesting
@TheCGEssentials
3 жыл бұрын
Glad you liked it!
@courtykayoss7797
2 жыл бұрын
The boolean modifier is exactly what I needed to know! You totally just saved my ass, cheers man!
@irCurts_Old_Gamer
4 жыл бұрын
thanks, buddy, that helped. :) It is nice to see stuff done on the 2.80+ Blender.
@TheCGEssentials
4 жыл бұрын
Awesome - glad it helped!
@tumblesstudios7082
3 жыл бұрын
Thank you! This Helped a lot!
@t4concepts
4 жыл бұрын
I remember when I was following your Sketchup tutorials, but I switched to Blender ; ) I love the way you explain things, very easy to follow ................. But I have a question for you. What if I needed to scale my cut hole to a specific diameter? Say 120mm. Could you possibly show us how to setup Blender for precise metric units please? Would be very helpful to many of us I think. Many thanks. Now Subscribed ; ) TURK
@therandomshow1265
3 жыл бұрын
T u rk
@koreboredom4302
2 жыл бұрын
No joke man you should probably trademark your intro.
@anicepop
Жыл бұрын
The first solution was exactly what I was looking for! Thank you very much!
@Glitch_the_chicken
5 ай бұрын
THANK YOU thank you thank you i have been trying to find a helpful video for hours. thank you for showing what mouse/keyboard buttons you press! thank you
@mikestl100
3 жыл бұрын
Great, concise explanation of cutting holes. It helped a lot, thanks
@TheCGEssentials
3 жыл бұрын
Glad it was helpful!
@greeniegringolrg6576
2 жыл бұрын
been wondering how to do the boolean hole for ages, thanks! super cool
@Franandphotos
2 жыл бұрын
Thank you! read a few tuts and watched videos but none of them said to hide the shape to be able to see the hole!
@ava33372
2 жыл бұрын
Thank you, Joker.
@NotAJiveTurkey
Жыл бұрын
Learned how to use Blender from your videos....thank you , liked and subscribed.
@ngendomuhayimana2158
Жыл бұрын
I'm blown away. Thank you
@Rachelsfunvideos
Жыл бұрын
For anyone struggling to figure out how to get to vertex editor since the number one isn't working for you, just go to the top right corner-ish area of the screen, next to where it says "Edit Mode". There you should see 3 small icons with cubes and odd white shapes on them. Hover over each of the icons with your cursor, wait 'till some text comes up telling you whether each one is vertex, edge or face select, (the first one should be vertex select, 2 edge and 3 face) and then just click on vertex select. Even though I already technically knew how to do this, he said vertex "editing" for some reason instead of vertex "select" which made it confusing to me, since "select" is the real term for it. Hope this helps someone! 🤗 Edit: Thank you The CG Essentials for the the tutorial!
@MattRigidBear
2 жыл бұрын
Just started with Blender and this was really helpful!! Thank you
@mineisthelefthandseat4768
2 жыл бұрын
Bridge edge loops was just what I needed, thanks
@arshiesugarbaby7833
2 жыл бұрын
Thank you so much! You saved my life.
@thearianatosado
9 ай бұрын
Thank you!! I really needed that bridge edge loops trick!
@TheCGEssentials
9 ай бұрын
Glad it helped!
@duppy404
Жыл бұрын
Great tutorial.
@flinn9090
3 жыл бұрын
5:10 best method in my opinion in my opinion
@FrazerGoddon
2 жыл бұрын
Nicely done man. Helped me cut a whole :D
@Shy-Shadow
2 жыл бұрын
This tutorial Came in Clutch for me Thank You So Much man! You just got a Sub. But I have one question. Can you do the Boolean Modifier Multiple times on the same object?
@puppetmasterin
2 жыл бұрын
Thank you man, the 3. option (make a hole with bolean) is what I was lookig for! Thanks so much!
@theodoros_1234
8 ай бұрын
Great tutorial, thank you!
@KoMaHu3aM
3 жыл бұрын
keeping those algorithms happy...
@TheCGEssentials
3 жыл бұрын
By providing valuable, step by step information that actually helps people solve a problem? Doing my best :)
@adorablegodzilla5628
2 жыл бұрын
You're a lifesaver! Thanks.
@discotec70
4 жыл бұрын
Thank you. Interesting, I learnt some new things!
@TheCGEssentials
4 жыл бұрын
Glad I could help!
@HappyHarbl
Жыл бұрын
This will help me... Thank you!
@ragavdeepak2204
3 жыл бұрын
Super helpful, tnks
@TheCGEssentials
3 жыл бұрын
Glad it was helpful!
@SourceAwareness
Жыл бұрын
Super helpful, many thanks Justin!! You are Awesome. 😎
@smolworm4468
3 жыл бұрын
I just want to thank you sooo much! I knew how to do the first couple of parts for the last option but was a dummy and forgot to select "object," so even though I was able to put in my rectangle it wasn't cutting into the object.
@TheCGEssentials
3 жыл бұрын
Yeah that's going to be important :)
@juleswombat5309
2 жыл бұрын
Is there a Menu Item for the Alt Shift -S: "Treat as a Sphere". I am not at all good with all the ctrl, alt memory unless I practice it many times, and would like to know where in the menu hierarchy I can find this for in frequent use.
@samfriedman9334
4 жыл бұрын
best boolean tutorial ever
@marissaninawork
2 жыл бұрын
Thank you. Your tutorials are amazing.
@TheCGEssentials
2 жыл бұрын
Glad you like them!
@illdie314
Жыл бұрын
This tutorial is really great, thank you so much!
@Spaniard47
2 жыл бұрын
THANK YOU!
@nowaaaaaaayyy
Ай бұрын
Bridge edge loops! Thank you was trying to make a window but kept deleting the middle of my rectangle.
@gooverto1344
3 жыл бұрын
Very Very Helpful
@Cevowo
10 ай бұрын
Yes this was helpful thank you
@ahora3854
2 жыл бұрын
Good job 👏 😊
@TheCGEssentials
2 жыл бұрын
Thanks 😄
@artemaung5274
Жыл бұрын
This is awesome! Such a simple thing, but this Alt+Shift+S is a game changer for me. You gonna laugh but last time I had to make a perfectly circular hole with good geometry (for a kitchen sink) I made chatGPT write a script to rearrange vertices in a circle to achieve that. Although it was easy and took only like 5 min, Alt+Shift+S is definitely easier :D
@gelfeatherweight5335
2 жыл бұрын
Using the third technique, how do I make this hole permanent? Does the shape that creates the boolean hole need to remain in the file? If I use this technique multiple times in a project, I imagine the file being full of invisible meshes
@zenginellc
2 жыл бұрын
Just select "Apply" in the Modifier menu and it will commit to it. Without doing this, it leaves it open to being changed.
@MorgsDuane
2 жыл бұрын
Thanks, Found this helpful
@TheCGEssentials
2 жыл бұрын
😎
@santx8923
3 жыл бұрын
Man you´re my hero
@NealjanYT
Жыл бұрын
thanks for this awesome tutorial
@1mrlee
4 жыл бұрын
this was helpful and quick and easy thanks mate!
@TheCGEssentials
4 жыл бұрын
Thank you - glad you liked it! :)
@chrisgo
3 жыл бұрын
Thanks for this, very clear.
@MagicxReal-Studio
2 жыл бұрын
It was perfect, I knew both except the bridge edges part
@MorrisseysMonkey
3 жыл бұрын
Excellent! I'm building a bridge viaduct and this helped alot.
@TheCGEssentials
3 жыл бұрын
Awesome - glad it helped!
@gaston.
2 жыл бұрын
excellent info!... nice basics that I first need to learn.. thanks for sharing
@bubuti15
3 ай бұрын
Thanks so much!
@themauriciobunch2442
2 жыл бұрын
Thanks so much for all this amazing info.
@daschtheducc
2 жыл бұрын
Thank you! super easy tutorial
@dplasvegas1
3 жыл бұрын
Great examples! Thank you!
@creationwithbeast12
3 жыл бұрын
Really helpful, But I have a problem when I switched to edit mode hole filled up again with the shapes.
@bimirthepointy7614
3 жыл бұрын
this was very helpful thanks
@TheCGEssentials
3 жыл бұрын
Glad it helped!
@deadhouse3889
Жыл бұрын
Thank you.
@siljeolsen2728
4 жыл бұрын
Just what I needed thanks:)
@TheCGEssentials
4 жыл бұрын
Glad you liked it! :)
@ritageraghty3261
2 жыл бұрын
Extremely useful tips. Thank you for sharing. 🙂
@FerziIsayev
3 жыл бұрын
Thanks, Bro I forgot this method you helped me to remember it.Love you from Azerbaijan
@TheCGEssentials
3 жыл бұрын
Glad it helped!
@tonyblack1981
4 жыл бұрын
Fantastic! Very informative and straight to the point. that was just the tutorial I needed. Thanks man.
@TheCGEssentials
4 жыл бұрын
Glad you liked it! :)
@allstargraphics1552
2 жыл бұрын
Really helpful tutorials. Thanks a lot.
@TheTrue_Burger
Ай бұрын
Thank you, I am going to use this for my hotdog costume in the future! I might even post a video about it if anyone wants to see it! 🤔
@Analisem1
3 жыл бұрын
Very helpful. Thanks!
@DeliciousCake_
2 жыл бұрын
THANK YOU SO MUCH
@moseechevowo
2 жыл бұрын
Boolean method is exactly what i needed. Thank you!
@prisminite2148
3 жыл бұрын
This vid really helped me
@skybyte4me
2 жыл бұрын
Very helpful
@presidualist4587
2 жыл бұрын
Very helpful I appreciate it
@TheCGEssentials
2 жыл бұрын
Glad it helped!
@socrates112
3 жыл бұрын
Great video. Many thanks for this.
@adamirani1474
8 ай бұрын
The way you're showing works great but how to we permanently make the hole? When I goto render it still shows the cylinder. Thank you in advance and awesome video
Пікірлер: 391