Regarding the use of a magazine as a tool; Observe that the base of the magazine has a rounded protrusion at the front, which is optimally the same profile as the spring cap cut in the bushing. Use the base, instead of the side, and the rounded protrusion mated to the bushing cut out will facilitate bushing rotation. This is also a reminder to remove your magazine, and verify clear, before disassembly.
@davesgunchannel
Жыл бұрын
Thanks for the tip!! Great info, much appreciated! Dave
@Armory52
7 ай бұрын
Helpful and no nonsense. Thank you
@davesgunchannel
7 ай бұрын
I’m so glad it helped and I really appreciate you letting me know!
@dr.g6105
11 ай бұрын
Excellent and helpful. Thanks so much.
@davesgunchannel
11 ай бұрын
You're very welcome! Thanks for watching and leaving a comment! Dave
@livebreatheadaptevolve
Жыл бұрын
Great video and amazing focused video. You're a wizard as most videos are filmed downward vs your close up with detailed view. Excellent sir!
@davesgunchannel
Жыл бұрын
Wow, thanks! I appreciate that! Thanks for watching and leaving the comment! Dave
@philwilliams8328
Жыл бұрын
Really like that bench block! Just placed an order for one.
@davesgunchannel
Жыл бұрын
thanks for the comment, I use mine all the time! Dave
@lestercoons3962
Жыл бұрын
I will have to try this. When I was young and did not have severely arthritic hands, I could do all this fairly easy. Now I am old and it is very difficult and somewhat painful for me. I haven't touched my 1911 in several years because of this. Thank you
@davesgunchannel
Жыл бұрын
I'm sorry to hear that! Hopefully, this will work for you! Thanks for the comment! Dave
@richard3716
Жыл бұрын
are these barrel bushings all the same size regardless of its a 45 or a 9mm ? i have a ria 1911 fs tact 2 in 9 mm
@davesgunchannel
Жыл бұрын
I do not know, that’s a great question! I will have to get my hands on one and take a look. Dave
@marshallohio5512
9 ай бұрын
I was gifted an Auto Ordenance 45 where the barrel bushing was so tight that I used pliers in removing it . And then, I used mini files in removing bushing material around the outter bushing until bushing could be reinstalled by hand only. What a major pain. I always wonder if all low end 45 bushings were like mine ? 😢
@davesgunchannel
9 ай бұрын
I hope not! I think if the bushing is lubed each time it is removed, it will not freeze like that.
@DG-oq8hj
Жыл бұрын
Hi Dave, I bought a RI 1911 with full length guide rod. I am thinking of putting a government model guide rod and barrel plug in it. Can I use the original spring or does it have to be changed? I hate the original barrel plug and want to be able to field strip it without any tools
@davesgunchannel
Жыл бұрын
What model is your 1911?
@jamesdelong6401
Жыл бұрын
Very nice! 😎🤘🍻🇺🇲
@davesgunchannel
Жыл бұрын
Thanks ✌
@kurtjensen7264
Жыл бұрын
The first way is wrong. It’s a good way to lunch the bushing across the room.
@davesgunchannel
11 ай бұрын
These methods all work. Removing parts that are spring loaded always comes with a risk of launching something across the room or into your face. That is why I dress Eye Protection and to perform all these methods carefully. Thanks for the comment! Dave
@mani1357mani
Жыл бұрын
Thanks for the video. Do you answer any questions about 1911 Gov?
@davesgunchannel
Жыл бұрын
I can certainly try! What is the question?
@mani1357mani
Жыл бұрын
@@davesgunchannel I remember from my father's handbook in the Iranian Imperial Navy I read that in case someone got your 1911 away from you, if you hit the barrel with your palm, gun will go on half cocked position and gives you a chance to wrestle the gun out of enemy's hand. When I went to army I tried the same technic with 1911 Government and it was true, however later on when I tried the same thing with modern civilian brands of 1911, it didn't work the same way. I tried a few brands like Sig Sauer, Springfield Armory and Colt. I even searched on internet to find some information about this topic but found nothing. Could you please shed some light on this issue?
@kurtjensen7264
Жыл бұрын
You need to cup your hand so you don’t launch it across the room.
@davesgunchannel
Жыл бұрын
Good idea! thanks for the input! Dave
@aspiring_soldier
10 ай бұрын
i do that but it won't come off
@davesgunchannel
10 ай бұрын
You may need to get some lube in there to loosen it up.
Пікірлер: 29