Why wouldn't my tuner be picking up what I'm playing? It stays blank with no movement. It's turned on. It works on other instruments in Ableton. I'm trying to use the "choir ahhhs melody gmin 115" sample.
@matttinklermusic
Ай бұрын
There's 2 main reasons: 1. Sometimes the pitch of the note isn't super obvious from teh frequency content, so the tuner has a hard time identifying it 2. The sample is playing more than a single note at once. Tuner is only able to identify single notes. I'd recommend using either EQ8 or Spectrum to identify the pitch of the fundamental frequency (the lowest, most prominent frequency) and then that tuning to that! :)
@xh3b4sd
5 ай бұрын
This is what the music industrial complex does not want you to know.
@rayderrich
Жыл бұрын
Please don't give us so much cool stuff to do in Live, I want to buy more hardware and run out of reasons to ;-) Great ideas as always, Matt.
@matttinklermusic
Жыл бұрын
😂😂 Live is just so powerful!! Thanks for watching my friend! :D
@HeavyMetalBoomerMobile
11 күн бұрын
This is amazing and motivated me to explore amazing sounds from scratch! Thank you! There was another technique to combine for example 3 or 4 different sounds from single audio channels and then group them (in a Sampler i guess) and then record them all with the midi controller, i just can't remember how exactly this was done... Have you a video about this? (Sorry for not asking the question clearly😂)
@matttinklermusic
8 күн бұрын
I'm really glad you liked the video! Are you talking about creating a rack of some kind? I'm a little unsure on what you're asking, sorry. 😅
@HeavyMetalBoomerMobile
8 күн бұрын
@@matttinklermusicYes, a rack in the Sampler! And then next step was to record either a whole octave (with the midi controller) or just 4 or 5 tones from this octave, here is where I don't know how it goes further...
@Drunk-on-Bleach
Жыл бұрын
Something heavily crackling in your mic audio, still good vid...
@matttinklermusic
Жыл бұрын
Yeah I had some sample rate issues with my capture software when recording this video, but I decided I'd keep it instead of re-recording because I was happy with how it turned out. Thanks for watching! :)
@O2regulator
5 ай бұрын
Now how do I make one of these samples longer
@matttinklermusic
5 ай бұрын
I'm not quite sure I understand what you're after.
@O2regulator
5 ай бұрын
@@matttinklermusic once I get the sample to play as midi is there anyway to play it where the sample will play the entire time I hit the key cus it cuts off when the part of the sample I have selected ends is there a way to extend it?
@matttinklermusic
5 ай бұрын
You will probably need to loop the sample with the 'loop' button if you're in the classic mode. :)
@smakauz
Жыл бұрын
What an amazing method) Thanks for sharing this. Honestly, I try to avoid using synths for anything but basslines. creating something entirely new from samples is much more creative and inspiring than tweaking presets for hours and end up sounding like everyone else.
@matttinklermusic
Жыл бұрын
You're welcome! Thanks for watching and I'm glad you enjoyed the video. :)
@boontan07
Жыл бұрын
Good job.. ❤
@imghostkitty7297
6 ай бұрын
is there any way to make it not ovbiously loob? it sounds choppy
@matttinklermusic
6 ай бұрын
It really depends on the sample, but the only way is to just experiment with the loop start and end and the crossfade length. Sometimes it's possible to get it seamless, but other times it is really tough. In the context of a whole track it tends to be OK though. :)
@aaronsbeats
5 ай бұрын
When I’m doing the first method I can’t hear my sample. Do you know why this would happen?
@matttinklermusic
5 ай бұрын
There could be a variety of reasons! It could be to do with not sending the track MIDI, the track being muted or something else being solo'd, not having enough volume on the simpler, but I don't really know without more info.
@aaronsbeats
5 ай бұрын
@@matttinklermusic I figured it out, I had to create a midi track and double click to get it in. Thanks for the response
@23rdJar
Жыл бұрын
That last one was crazy (in a good way). It seems as though with sound design I'm always attempting to create the "right" sound that's in my head. That can be cool at times, but the idea of just discovering a sound without any end goal in mind is a lot more freeing. Great tutorial
@matttinklermusic
Жыл бұрын
I'm glad you liked that last one! I won't lie, I had to really think about the best way to showcase that last one, haha. My favourite part about sound design is just experimenting, it's so much fun!
@progmaster15
6 ай бұрын
as someone who does live beatbox sampling, I have to say this video was a game changer for me these techniques are great for real time vocal sourced sound design thank you for the tutorial, you just saved me sooo much time
@matttinklermusic
6 ай бұрын
You're welcome! 😁 Thanks for watching. :)
@user-gl2qt1mt3o
7 ай бұрын
this click and dragging does not work
@matttinklermusic
7 ай бұрын
You need to make sure you're dragging onto a MIDI tracj, not an audio track.
@Branadot
4 күн бұрын
Youuu are some awwesommeee.
@matttinklermusic
3 күн бұрын
Thank you for watching! :D
@ThatKidFromTheTown
Ай бұрын
subscribed. Thank you so much man, amazing explanations. Also, yes, like others said.. thank you for saying something about the audio. Had me tripped out about my speaker as well😭
@matttinklermusic
Ай бұрын
Thank you for watching! :D So sorry about the audio, hahaha
@ihsas92
3 ай бұрын
Honestly top tier! Been through COUNTLESS videos trying to figure this out for what seems like forever now, FINALLY came across yours! THANK YOU! And to top it off, you apologize for the clicks and crackles in the audio, was worried something was wrong with my audio until I read that 😂. Absolute win mate.
@matttinklermusic
3 ай бұрын
Thank you so much! I'm really super glad you found the video useful. It's my pleasure to help out. :) Also, glad to hear the disclaimer about the audio crackles didn't go unnoticed either. 😅
@LoRdeShellz-ff4vi
Жыл бұрын
BleSSingZz
@simranjeetdhaliwal8653
2 ай бұрын
Why is it that even though i do the same exact thing that's done in this video, i can't get such an amazing sound as he made?
@matttinklermusic
2 ай бұрын
There could be a few reasons for this, but it most likely has to do with the sample you're starting with! Can I ask which of the methods you're trying to replicate?
@matttinklermusic
2 ай бұрын
There could be a few reasons for this, but it most likely has to do with the sample you're starting with! Can I ask which of the methods you're trying to replicate?
@simranjeetdhaliwal8653
2 ай бұрын
The third. I took a mechanical sound from splice and used it, but it sounds so basic, whereas what you've made? It's incredible
@midhunshankar747
5 ай бұрын
Bro!!! That was awesome 🔥🔥💯💯 been searching for past 2months & finally 👍👍Keep doing Bro 😍😍🖤🖤
@GKArAj
2 ай бұрын
Same. I've been searching for this for a while, lol thank you !!🎉
@caitlindrumz
5 ай бұрын
OMG yessss finally have found exactly what i've been wanting, sick video man!!
@matttinklermusic
5 ай бұрын
I'm glad you l found it useful! Thanks for watching. :)
@0x80O0oOverfl0w
Жыл бұрын
Would love to see more Ableton Live videos using Simpler and making/using samples in general. One think that I don't understand about Simpler is how to export all the samples once you get a good slice. I haven't been able to find a way. I also haven't been able to figure out how to delete "bad" slices, for example parts where there's no audio.
@matttinklermusic
Жыл бұрын
I can definitely do more sample videos! To 'export' the samples from simpler, when you're in 'slice' mode and have found the slices you want, you can right click in the sample area and click on 'slice to Drum Rack'. This will convert all of the individual slices to pads on a Drum Rack. From there you can process each slice differently, and even remove the silent slices, as you mentioned. :)
@emcee19.05
5 ай бұрын
awesome explanations, the algorithm did right this time by recommending this :D subscribed
@matttinklermusic
5 ай бұрын
Thank you for the kind words and thanks for watching! :)
@solnova7928
Жыл бұрын
I'm having some difficulties with the first method. I wonder if its the sample I chose
@matttinklermusic
Жыл бұрын
It could be! You need to make sure that the sample you choose has a single musical note held for a decent length of time, otherwise you might not be able to get a clean loop. Let me know how you go! :)
@bassplusro
Ай бұрын
I am a novice and this looks like so much value, thank you!
@matttinklermusic
Ай бұрын
You're very welcome! Thanks for watching. :)
@Serge_Era
Жыл бұрын
Third method good for plucks, I suppose)
@matttinklermusic
Жыл бұрын
Definitely a nice way to create a pluck! But depending on the sample you start with it can be great for anything!
@NeostormXLMAX
6 ай бұрын
0:52 literally never explained how to fucking play the sample….. didnt show hotkey used lmao
@matttinklermusic
6 ай бұрын
Sorry about that! There was assumed knowledge there on my part. All you need to do is send the MIDI track some MIDI with either a MIDI keyboard, a MIDI clip or by using the computer MIDI keyboard, which you can activate with the 'M' key on your keyboard and then use the middle row of your computer keyboard as the 'white keys'. You will also need to make sure the MIDI track is armed. :)
@cryptochris9001
Жыл бұрын
The last method is what ive been trying to figure out for a long time thank you
@matttinklermusic
Жыл бұрын
You're welcome! Glad I could help out. :)
@ShorKaichi
Жыл бұрын
Wery unique tutorial ❤🔥
@matttinklermusic
Жыл бұрын
Thanks for watching! :)
@ManushJohn
Жыл бұрын
Liked and subscribed!
@matttinklermusic
Жыл бұрын
Thank you! :D
@mmbmashup7048
Жыл бұрын
So good
@matttinklermusic
Жыл бұрын
Thanks for watching! :D
@OscarSlapp
9 ай бұрын
💯
@matttinklermusic
8 ай бұрын
🙏🙏
@seraikdm2340
Жыл бұрын
You are the best ableton tutor bro thanks for all the knowledge.
Пікірлер: 67