Nice job the lights really add another element of realisim i am tempted to do the same in my buildings and this video is down my path nice work.
@DonegalDadRail
3 жыл бұрын
Glad you found it useful.
@rydermike33
3 жыл бұрын
Very effective Mark. Many thanks for an informative video. Nice to see your trains all illuminated as well.
@DonegalDadRail
3 жыл бұрын
Glad you liked it Mike. Its good to have some trains running.
@normanrowe2831
3 жыл бұрын
Hi ya Mark. Great tutorial on LEDs. Short and to the point. Thanks. See ya next time.
@DonegalDadRail
3 жыл бұрын
Glad you enjoyed it Norman
@ModelTrainOutsider
3 жыл бұрын
Excellent walk-through and outcome! Great video, Mark.
@DonegalDadRail
3 жыл бұрын
Glad you liked it! Anthony
@martinwalsh3228
3 жыл бұрын
As the reopening of the Western Rail Corridor would be help to cut down on Traffic on our Roads in Donegal, Sligo, Mayo & Galway on stopping Car Accidents, Road Deaths, Pollution & Traffic Jams too St. Stephen's Day trains and 24 hour trains in the summer months too.
@DonegalDadRail
3 жыл бұрын
👍
@martinwalsh3228
3 жыл бұрын
@@DonegalDadRail Put it on every television programme of course.
@johnodonoghue7381
2 жыл бұрын
Very informative Mark
@DonegalDadRail
2 жыл бұрын
Thanks John
@scottmcneil1150
3 жыл бұрын
really useful, until now I've been a bit intimidated by electrics but this has limited my scenery, currently starting motorising points before scenery on a new layout inspired by the track plan at Donegal museum.
@DonegalDadRail
3 жыл бұрын
Don't be intimidated by the electrics, if you are stuck on anything I can always try to cover it in a future video.
@scottmcneil1150
3 жыл бұрын
@@DonegalDadRail thanks mark, appreciate that support, I know that once I get some experience it'll be fine. I'm fascinated by the Irish railway sytem's history, got lots of great books at the museum in August
@roystudds1944
3 жыл бұрын
Found this video really interesting. Just been sorting out my wiring for my points and signals. Got the points working but something wrong with the signals. Like the idea of lighting the coaches.
@DonegalDadRail
3 жыл бұрын
Glad you liked it. Are your signals wired to the points or operated by switchs?
@roystudds1944
3 жыл бұрын
Donegal Dad operated by switches. They did work for a while and sometimes flicker so I think there’s something wrong with the wiring but haven’t been able to work it out.
@DonegalDadRail
3 жыл бұрын
Are leds? Are they wired from the same power supply?
@roystudds1944
3 жыл бұрын
Donegal Dad they are the Hornby colour light signals. I run them from my my Gaugemaster Model D controller using the 16 volt AC output as per the instructions.
@DonegalDadRail
3 жыл бұрын
First thing is to test the controller output to make sure its working. But it sounds like a loose connection somewhere. Work back from the output to the signal to see where the issue is.
@casnewyddjunction3150
2 жыл бұрын
Hi Mark, great video. I have the same led lights as you, the ones with the clear plastic covering. How do you remove the cover to solder onto the copper? Do you just burn it away with the soldering iron or do you try and remove it with a knife? Thanks Steve
@DonegalDadRail
2 жыл бұрын
Hi Steve thank you, I usually use a craft knife to scrap away the insulation. I have another video on LED's coming out this Friday covering the use of some flashing LED's for different effects.
@georgiasunbelt
3 жыл бұрын
Nice light tutorial Mark....what ohm resistor did you use for the 12v power source? Hopefully, I asked that question right 😊....Anthony
@DonegalDadRail
3 жыл бұрын
It was 1Kohm resister, if the lights are to bright you can add another resistor in series.
Пікірлер: 26