Had one of those in my Baja, incredible motor for the price, just ordered one for my Kraken.
@eastsiderc
2 ай бұрын
@@knolatwood3201 sure is bro and a lot can be done to it to make it even more killer!
@gregorydobson4307
4 ай бұрын
Sounds amazing, and awesome rip. 😮
@eastsiderc
4 ай бұрын
Thanks Greg I appreciate it.
@thunderrc
Жыл бұрын
My bro that buggy sounds Like Eastside Perfection baby!👑🔥🔥🔥The gas king!
@eastsiderc
Жыл бұрын
🤣🤣 the Gas King I love that bro! I knew you would like it. It sounds so good for a bone stock Chinese engine! I really like 30 degree north
@soblessed6438
Жыл бұрын
Man son it was ripping good. Yes get it over here. It will be a blast!
@eastsiderc
Жыл бұрын
🤣🤣🤣 sounds good mom
@kgm5512
Жыл бұрын
She fired right up!! Sounds like a good ripper! Can wait to see tune set on kill!
@eastsiderc
Жыл бұрын
Hahah for sure brother ! Tune it set to kill 🤣🤣!
@DrJT-ly3vr
Жыл бұрын
Always learn great stuff every video... thank you, brother!
@eastsiderc
Жыл бұрын
Absolutely bro thanks for watching! I hope you n the fam have a super blessed week!
@tonymanna9160
Жыл бұрын
Rips good brother. I love how it sounds. Makes me want to go fire up my 37!
@eastsiderc
Жыл бұрын
Hahaha Im sure it does! And I was quite impressed with how good it sounded!
@colewoodruff6346
Жыл бұрын
Amsoil saber is for weed wackers, I use ams dominator or klotz.
@eastsiderc
Жыл бұрын
And dominator has additives for clutches in dirt bikes and its gooey. If we all used the same and did the same things this would be a boring hobby. You run what you run and I run what I run. Dominator is good for 60:1 Saber is professional oil not just for weed eaters. Real the label its good for all other two stroke applications as well. Dom and klotz are both good oils too.
@colewoodruff6346
Жыл бұрын
@@eastsiderc true i just prefer a good dirtbike oil and ive herd of ppl running 50 and 60to1 but all my cousins and friends that ride dirtbikes run 32 or 28to1 so that what i run.just my opinion, love tha channel by the way.
@JuanPerez-sp7xn
Жыл бұрын
That 38cc looks like it got some decent power
@eastsiderc
Жыл бұрын
Yeah it does. We will see more of it when I get it over to my brap spot!
@srerccustoms537
Жыл бұрын
Good video Jeff the 38cc is a great cylinder I use it on my 40cc .
@eastsiderc
Жыл бұрын
Awesome! How are you getting 40 ccs Allen said it can only be made a 39cc
@srerccustoms537
Жыл бұрын
@@eastsiderc I make my own crank ! 32mm
@DrJT-ly3vr
Жыл бұрын
Sounds awesome... so curious to see if the 38cc ends up being a killer engine... the Rovan 45cc just didn't inspire me on most vids (except East Side)... low revs maybe? I hope the 38cc will be good in 30°N DDT... I love the 2wd action though...
@eastsiderc
Жыл бұрын
The 45 is actually a very fun engine. I will make some vids with it this fall. I gotta rebuild the engine and Ill take it out. It does not rev high at all. But it aint too bad. This 38 seems like it will make some rpms so we shall see. I was surprised it went over 12k in such a short distance.
@kingkongrc247
Жыл бұрын
I've been waiting for this video now my mind is made up about to put my order in it looks like this engine is going to be a ripper thanks 👏👌👍 I have a obr side pipe I'm curious to see if it responds well with that pipe
@eastsiderc
Жыл бұрын
Brother that is great to hear. I think its going to be a fun engine when its ran in! it sounded great. I was shocked at the rpms and it was not peaking yet crackling. That was an out of the box tune! Im going to play around with it and find what it likes best as far as gears n Vstack n filter go!
@kingkongrc247
Жыл бұрын
@@eastsiderc looking at that little short rip I can tell that it has a lot more to offer
@garofalo1707
Жыл бұрын
Definitely a good idea to run a little rich with a 2 stroke.
@eastsiderc
Жыл бұрын
Yessir I run all my two strokes as rich as I possibly can on the low and clean up the tune with the high needle! I love making power! Beautiful Dog bro
@gazbo_RC
10 ай бұрын
I got a olimat silenced pipe, would that work with the 38-45 30DN / Rovan engines? It’s currently on my rovan 36cc Thanks in advance, another great video bro 👊
@eastsiderc
10 ай бұрын
It’s worth a try, brother it certainly won’t hurt it
@romper4444
Жыл бұрын
No bog or lag on the bottom end takeoff at all eh!
@eastsiderc
Жыл бұрын
No man it runs quite well for not really being done right 😆! Its cheap enough too and made of good quality parts! However as good as it runs there is A LOT of room for improvement in this little power house.
@dancj10
Ай бұрын
Why is it so hard to pull sometimes? For me, I had to pull so hard just to get it to start. Broke my rope twice and had to buy a electric starter to make it work and start with my drill instead of the pull string
@eastsiderc
Ай бұрын
The 38cc has some decent compression because of the small combustion chamber, if you load it with a little too much fuel ⛽️ that will increase the felt compression. That engine just needs a good ratcheting type easy start or a Taylor RC pull start those are tough and get it going. Fearless sells the ratcheting pull start you will have to change the flywheel though. But the pull starts come with the pawl assembly. They are really nice you dont need to yank the piss out of them. You pull the string until you feel the pawls catch and then you just pull the string up and the spring in the pull start helps spin the engine over. They are my favorite pull starts because breaking strings is no fun!
@dancj10
Ай бұрын
@eastsiderc lol thanks. Last time I flooded it and all the fuel finally came out. Then once it was all out (which by the way, I had it tipped over) it still felt hard to pull. It makes sense it is hard to pull it cause of the 38cc compression for sure just never knew it was so hard to pull without heating the engine with a heat gun.
@mossberg585
20 күн бұрын
Can you let me know what pull start you are running the factory one on the 38 is junk. It makes a horrible noise from the start.
@eastsiderc
20 күн бұрын
Agreed! How ever that is a similar styled one in my 38. The billet easy starts are much better and you can also try RV85311 its cheap from fearless rc . You will need the flywheel with the center piece milled down to accept the easy start pawl assembly . Its all a very cheap set up and worth a try bro. I hope that help you out man. Happy brapping to ya!
@joshchatwin8569
Жыл бұрын
Waiting for that 40gt install in that Baja 5b
@eastsiderc
Жыл бұрын
Yea man I will get to it. Ive been so busy I haven’t had much time to do what I want to do because Ive been helping others but Im all caught up now and can start wrenching soon. Ive got a pile of wrenching to do !
@joshchatwin8569
Жыл бұрын
Where's that rpm reader from and how you fit it brapp brother
@eastsiderc
Жыл бұрын
Its from DDM and it has a thin red wire that you curl around the spark plug wire and then zip tie it off. It works well and the most accurate one I have used. I have gotten one bad one though. They are 50 bucks and go on sale sometimes from DDM. You can also buy it from Detroit Performance RC on line
@RickysRcChannel
Жыл бұрын
hi pal ive just put mine into my q baja and it wont wheelie and ive had to take the air filter off just to get it moving, but with air filter off it only takes off at high revs and ye wont wheelie any help ty.
@eastsiderc
Жыл бұрын
Ok brother you may have an issue. Fearless RC got a bad run of 38’s and the crank seal on one side is not seated and walks out thus creating a lean condition killing power and burning up the engine. You may want to check your seals. If the seals are okay then your tune is way off and needs to be adjusted.
@Thunder_Road_81780
Жыл бұрын
I have the Taylor pipe on my 30.5 I think the pipe is a little to much for the little guy unless I need to re tune the carb☠️🛠👊
@eastsiderc
Жыл бұрын
If you have not retuned after changing the pipe then You definitely need to retune it. But it is also possible its to much for a 30.5. It has a rather large stinger. Tuner up brother💪🤝
@joshchatwin8569
Жыл бұрын
I didnt like it I loved it 🔥🔥
@eastsiderc
Жыл бұрын
Thank you man! When I get this to mom n dads with taller gears it should be fun to see and really sing a nice high note
@anthonythompson4718
Жыл бұрын
Hey brother I know u have plenty of engines I’m on the border line. What do u think for my Rovan Hybrid the OBR 34cc full mod 7.9hp full mod or the 38cc??
@eastsiderc
Жыл бұрын
Hmm well the 38cc is actually a good cheap option that pulls decent gears really. The obr is case read so you will loose a little torque their. Have you considered a Taylor 35? They cost about as much as that OBR but more powerful Id say.
@stuch77777
Жыл бұрын
where are you getting those 90 dgree brass fitting for the fuel cap? got a link please?
@eastsiderc
Жыл бұрын
Ebay and Amazon I dont have a link just type 5 mm 90 degree fuel fittings and they should pop up bro! Thanks for watching
@stuch77777
Жыл бұрын
@@eastsiderc the ones i am finding are not threaded. how are you mounting them to the cap?
@eastsiderc
Жыл бұрын
@@stuch77777 I tap the cap with a M5x8 tap and thread it on there. I have s full step by step video posted of how I do up the cap.
@Harvz78
7 ай бұрын
What steering servo are you using on it?
@eastsiderc
7 ай бұрын
A four-year-old stock, Roven one
@adamkeene6371
Жыл бұрын
Is 30 degree north an independent manufacturer, or is it made by another company?
@eastsiderc
Жыл бұрын
I honestly dont know but I can find out for you.
@adamkeene6371
Жыл бұрын
@@eastsiderc found it. It's made by kingmotor
@fpvandgasrc4321
Жыл бұрын
First... been awhile brother
@eastsiderc
Жыл бұрын
Hey bro hope you have been good 🙏🤝💪
@eugenewaller7257
Жыл бұрын
Was this the first breaking start up or, is it already broken in ?
@eastsiderc
Жыл бұрын
Very first fire up bro ! Its got a lot more to offer!
@eugenewaller7257
Жыл бұрын
@@eastsiderc oh wow bruh, I never seen nobody rip a little bit with a brand new engine with out putting it on the the stand and do heat cycles. I'm truly confused now?
@stevenpeters2593
Жыл бұрын
Nice rip all over dust and I hear cross street Karen yell stop make dust! 😆😆
@eastsiderc
Жыл бұрын
🤣🤣🤣🤣😆🤣😆😂😆I love you brother!
@stevenpeters2593
Жыл бұрын
@@eastsiderc love u back! 😆🤣
@khaosnitro
Жыл бұрын
it runs? 😦
@eastsiderc
Жыл бұрын
Yessir seems like its gonna run nice!
@thatoneguy2756
Жыл бұрын
@@eastsiderc is this a box stock 38cc engine , Taylor pipe, what gears and clutch spring?
@eastsiderc
Жыл бұрын
@@thatoneguy2756 yessir box stock . Stock gearing 17/57 and it will pull I would say 19/55 when ran in . Only mods are the Velocity stack thats it . Box stock tune too. I only adjusted the idle about a half a turn in . It will be a different animal at mom n dads with a spot on tune and long pulls to see what kind of RPMs it makes .
@thatoneguy2756
Жыл бұрын
@@eastsiderc wow! Looking forward to the run after the tune
Пікірлер: 72