Nice job with the turbos, Austin. I'm extremely pleased with they way they turned out. I wish I would have stayed with the 3000GT bearing housing instead of the Volvo housing because all the threads on the 3000GT bearing housing are 1.25 thread pitch and the Volvo bearing housing are 1.5 pitch. I'm having a very difficult time finding an adapter for the rear oil feed (m12x1.0 female to m12x1.5 male) and a long coolant banjo bolt (m12x1.5x1.5"(38mm)). The front turbo oil feed was a 10mm and on the Volvo its a 12mm so I had to modify my front oil supply line to work with a 12mm bolt instead.
@byangAR15
4 жыл бұрын
Looking to do Volvo 16t td04hl for my 3000gt. Any luck with those?
@steventaeza5094
7 жыл бұрын
Nice work, I have a Greddy turbo 15G(Mitsubishi turbo). Is there anything that can be done to it?
@destinycalled
7 жыл бұрын
you should do something on srt4 turbos or is there anything you could do hybrid wise to make more power on the stock housings since the exhaust side is built into the manifold
@davegunner2717
7 жыл бұрын
nice.. I have a td06 that in need of a rebuild.
@SNIP3RT3CH
7 жыл бұрын
man i sure got you some 3s customers
@rickarda9232
7 жыл бұрын
Hey man. Don't know if you want to comment on this but I'll try.What is your opinion on the Taiwanese Kinugawa turbos? Thinking about getting their 19T-HL Compressor sides and machine out some spare exhaust housings for them? Is it a good alternative for the Oem Mitsubishi or would you advice not to?
@turbolabamerica
7 жыл бұрын
+Rickard A I have machined the turbine housings to fit those a few times. Some of the 3000gt turbine housings use a Subaru style heat shield which won't fit that turbo, you just have to be aware of your turbine housings that you have. I have a set here here that I am machining the turbine housings for , I don't need the rebuild kit. turbos at all unless you want me to install the housings. I took a set apart a long time ago but I can't remember what rebuild kit was in it, it's really important to have the upgraded. I would think they were a quality turbo, my only concern is the rebuild kit because the kits with the steel bearings always caused immediate problems.
@rickarda9232
7 жыл бұрын
How do I know if my turbine housing has the subaru style? And I'm not sure if I followed but,,, you think the Kinugawa turbos are good except they require a rebuild kit?
@turbolabamerica
7 жыл бұрын
kzitem.info/news/bejne/lJyQsoV6fGedgKQ They need to have the upgrade rebuild kit with the Cooper bar dual oil port thrust bearing and 14 mm thrust collar and spacer. You should ask them.
@ciciliakiris
6 жыл бұрын
How do I get in contact with you. I want to know how much is to rebuild my turbos stealth rt twin turbo 1993 year
@williamgonzalez7004
7 жыл бұрын
I have email you and I had no Response back???? I was Wanting to buy a trubo.
@littco
7 жыл бұрын
how do you get away with not vsr balancing these units?
@turbolabamerica
7 жыл бұрын
+Dan Little we balance the assemblies, there are specs sheets we go by. The assemblies take in account all of the rotating parts.
Пікірлер: 14