1990 300zx NA won't idle with TPS plugged in. Studders then stalls.
RESULTS:
----------------------------------------------------------------------------------
Pin A should be 0v
My result: A= 6.2mv
Pin B should be 5v
My result: B= 5.1v
Pin C (black wire) to pin E (red wire) should be about 9,000 ohms.
My result: C to E= 9.25k ohm
Pin C (black wire) to pin D (white wire) should be 1,000 ohms.
My result: C to D= 0.888k ohm
Connecting to the white wire on the back of the TPS side, The voltage should be between 0.4v and 0.5v.
My result: = 0.419v with a max of 3.920v at full open throttle.
Refer to: z32.wikispaces....
Негізгі бет 300zx Z32 NA Idle issues
No video
Пікірлер: 16