Easily the best made video for this adj. Thank you so much for keeping it short & sweet.
@lostliving
Жыл бұрын
Good video. Much easier to understand seeing the motor out of the frame rails!
@miguelchavez5629
Жыл бұрын
Good work bro
@cornelliousbigshipzhawu6669
5 ай бұрын
lovely vedio
@eri197395
4 ай бұрын
Exelent thanks
@LovelessRanch
Жыл бұрын
More Smokey Smoke! Love the Smokey Smoke!
@user-jp7rk1uf2n
8 ай бұрын
Smoke doesn't mean power.
@LovelessRanch
8 ай бұрын
@@user-jp7rk1uf2nthanks Captain obvious…. But it bothers people like you, and I was put on this earth to do just that!
@WickedIntentSemi
Жыл бұрын
Hi can I get more smokey smoke from the afc without messing with the screws. I want smoke but I’m happy with my stock power it doesn’t get hot and I’m happy
@victorcortespayasojr7229
2 ай бұрын
What functions does each screw have? I have heard that they say that one is the torque one and the other is the diesel passage.. but I don't know which one it is for each thing.. by the way, excellent video 👍🏻👍🏻
@solitario-un1fs
Ай бұрын
👍😜🤠
@GrumpasHauling
11 ай бұрын
Can you turn the smoky smoke screw in a little bit to get a little smoke instead of all the way
@mexicanmexican8682
11 ай бұрын
Yes, you can turn it a little bit. If you like the result, you can leave it alone or if you want more smoke you open it a little bit more.
@continentalsolutions3632
Жыл бұрын
Good video, do you know any good quality and affordable injectors for a 3406b?
@mexicanmexican8682
Жыл бұрын
Heavy highway parts and LTA and heavy duty pros that’s where I get most of my aftermarket parts from injectors, rebuilt kits
@michaelsetliff1926
Жыл бұрын
They don't have injectors the have nozzles but the best thing is to match your turbo with your nozzles sorta like a cam and lifters on a V8 gas motor
@etcllc3519
7 ай бұрын
OR8785 marine nozzles
@reefready9284
3 ай бұрын
@@michaelsetliff1926 Make sure your nozzles match your piston tops , you don't want to burn holes in your tops because they don't match
@etcllc3519
7 ай бұрын
4 turns out from stock and a 4 degree advance, I’m pushing 35 lbs of boost with OR8785 marine nozzles, a BullyDog Stage II turbo, and a heavier dozer spring on the AFRC.
@darrenwebb5334
6 ай бұрын
What is stock?
@shanechambers3503
17 күн бұрын
So how much hp do you get from doing this ?
@mexicanmexican8682
17 күн бұрын
It depends how many times you turn it if you turn it all the way you can get 700 or more and depending on the upgrades you have done to the engine
@213eddy
Жыл бұрын
A perro what happened to the Cummins
@mexicanmexican8682
Жыл бұрын
Don’t be jealous Catapillar‘s turn
@kellonmaitland6814
Жыл бұрын
Four 360 turns on each screw?
@mexicanmexican8682
Жыл бұрын
Yes, you can do more turns if you want but that depends on you
@johntheharleyguy1
Жыл бұрын
Can this same thing be done on a 3406A
@mexicanmexican8682
Жыл бұрын
It’s different the3406A only has one turn out screw
@johntheharleyguy1
Жыл бұрын
@@mexicanmexican8682 But it's done the same way?
@mexicanmexican8682
Жыл бұрын
Yes
@johntheharleyguy1
Жыл бұрын
@@mexicanmexican8682 thank you so much my friend I appreciate it
@theodoreflageolle3617
Жыл бұрын
as a Cat tech you don't do this unless you know what you are doing and have the proper tools that is not here and they don't always turn 1 for 1 that is the FLS FTS settings there is a measurements that this goes to but if people would like to do it this way I am happy to rebuild eng. when you destroy it. and if you get emissions and the seal tag is not there like in video it wont pass and if a mechanic is caught doing adjustments improperly its a nice EPA fine.
@LovelessRanch
Жыл бұрын
Hey Bud we stopped caring about emissions back in the 60’s Those screws adjust the smiles per gallon and nothing more here.
@user-jp7rk1uf2n
8 ай бұрын
I always had a known Caterpillar mechanic do all of the injection system adjustments on my mechanical and electronic Cats. I never had any trouble with them.
@etcllc3519
7 ай бұрын
Stay in California. We love our B’s in coal country
@connorcardoza4810
3 ай бұрын
😮😮😮😮😮😮😮😮😂
@mattcoy2817
Жыл бұрын
What kind of HP increase is four turns
@mexicanmexican8682
Жыл бұрын
I’m not 100% sure since I don’t have a way to measure horsepower but guessing anywhere from 50 HP 80 HP if you turn those screws all the way out you can get well over 600 hp, but it gets hot don’t get greedy or you’re blow it up.
@user-jp7rk1uf2n
8 ай бұрын
@@mexicanmexican8682 aww shucks let him melt it down. Mechanic wants work.
Пікірлер: 39