Briggs & Stratton Model# 76140 - 35 kW Liquid Cooled Standby Generator Installation. Read All of the Text Below for Common Generator Replacement Part Numbers :
Briggs & Stratton 071054 - Symphony Transfer Switch and If necessary to Have Cutoff In Transfer Switch- 6308 Kit.
Briggs & Stratton 6241-0 - Engine Coolant Heater Kit
Mounting L Brackets - Thomas & Betts Item# ZAB205-10
Battery - Costco# 850259 - Interstate Group# 65 & Fitment Code #4
Generator Parts with OEM Information:
Engine is a GM 4 Cylinder 3.0L Vortec Engine - 2015 - Impco Model# 7044600
Oil - Pennzoil 550038331 Ultra Platinum 10W-30 Full Synthetic Motor Oil
Oil Filter is - PF 1218 (a longer version of the stock one)
Spark Plugs # R42LTS Gapped at .035 - OEM Part# 19301658
Alternator V- belt - Goodyear Gatorback 15386 - 11AV0965 or Briggs Part# 314138GS - Continental Elite V-belts Part# 20033481
Radiator Hoses:
Upper Hose: Dayco 81171 - or Briggs Part# 313211GS
Lower Hose: Dayco 81351 - or Briggs Part# 313210GS
Air Cartridge Filter - Donaldson P532410 - or Briggs Part# 207575GS
Distributor - GM Part# 93442429 & Impco Part# 93442429
Rotor - GM Part# 10467546 & Impco Part# 7241620
Wiring For Generator: www.wireandcabl...
A. Power Cable - Item# VNT2s0-3C-G - #2/0-3C THHN-PVC TrayCable w/G
B. 2 x 120V Cable - Item# VNT12-2C- #12-2C THHN-PVC Tray Cable
C. Communication wire- Item# -VNT18-6CS - #18-6C THHN-PVC Shielded Tray Cable
American Fittings Corp. STR-250 & CG125D1150 & Liquid-Tite Flexible Conduit
Other Generator Part Numbers:
Thermostat - Impco# 7140340 - B & S #314093
Gasket & Thermostat - Impco# 7140310 - B&S #314091, GM #10105135
Ignition Coil - Impco# 7242320 - GM #1115491
Spark Plug Wire Set - Impco# 7241830 - B&S # 314126 - GM # 93430078
Alternator, Impco# 7SI - 7244700 - B&S# 314137, GM # 19020608
PCV - Impco# V3-51806-001 - B&S # 314143, GM # 8995284
Starter Motor (includes items 4-7 & 12) - Impco# 821042 - Landoll Corp. Described as: Starter, 2kW PG260N2
Crank Sensor - IMPCO# S8-51822-001 and GM Part# 12588992
Oxygen Sensor in Exhaust - Briggs Part# 314122GS. The Part Says on it that
It is a Model# 0258006956, I believe it's made by Bosch.
Impco Catalog# 1 HEGO 1, Pre-Catalyst 1 7176700
You need a 7/8 Inch Wrench and have to Slip the closed side over the wire by unclipping the wired side and sliding it down the wire until it’s over the bolt on the sensor. Be sure to add lots of anti-seize to the threads and tighten lightly. Do Not use Silicone spray, it will damage the sensor.
Second Oxygen Sensor TMAP in Air Intake:
Briggs Part# 314107GS
Impco Manual says: HEGO 2, Post Catalyst 1 - S8-50234-001
Water Port Pieces:
Adapter, Freeze Plug O-ring - Impco# A4-51798-001 - B&S# 314145
Clip, Retaining - Impco# P1-30559 - B&S# 314146
Fitting, 5/8 x 90 x .78” - Impco# AF4-50733-001 - B&S# 314147
Fluids:
Coolant - 50/50 Mix - 4 Gallons
Oil - 10W30 Synthetic 4.3 Quarts
Негізгі бет 35KW Briggs & Stratton Standby Generator Installation
Пікірлер: 211