I finished drilling holes and injecting one can of the minimal expanding spray in foam insulation. I Went back to Home Depot for more but this time I bought the regular spray in foam for gaps & cracks..made by Loc-tite.
FIND IT HERE: Loctite Tite Foam Gaps & Cracks White Insulating Foam Sealant, 12 fl oz, 12, Can a.co/d/9SN0U66
It worked better than the minimal expanding foam made for windows & doors.
Tip: drill 1/2 dozen holes in an area aprox 16" in diameter in different sections of door..(DON'T DRILL THROUGH THE DOOR!)
this will give the foam a place to exit as it expands.
As it expands it will oozes out of the holes aprx ( 1" or so) if it expands out of any of the holes more than that you are probably injecting too much foam. let dry, then hit it with a putty knife to level foam with door surface. This is the bottom of the door, so it doesn't have to be pretty.
Once this was done I flipped the door over, right side up & started rolling paint.
⭐️less is more..a two second squirt of foam is plenty in ea hole, you can always go back, drill a few more holes and add more foam.
THIS FOAM INSULATION WILL NOT COME OFF YOUR HANDS...ask me how i know.
WEAR LATEX GLOVES. I didn't, I was anxious and my hands are a mess 🤣 stay tuned!
Негізгі бет 36 x 80 slot car layout Foam insulation & paint completed.
No video
Пікірлер: 7