This is what Hot Rodding is all about. Love this stuff!!! You don't have to be rich to go fast!
@Toys4Life
2 жыл бұрын
Thanks man, I totally agree!
@chadoliver2966
2 жыл бұрын
I'm actually going to be painting my ported m62 supercharger in the spring and I decided to go with high heat paint in a gloss aluminum color.
@Toys4Life
2 жыл бұрын
The heat's not a problem, I've used regular enamels for all kinds of brake calipers and engine parts with no issues. The problem is if you get any fuel leaks on them at all even just a few drops it can melt away the non-catalyzed spray can paint.
@chadoliver2966
2 жыл бұрын
Yes very true that has happened to me before and I was not a happy camper. Keep the videos coming Sir. I really enjoy them.
@bat5917
2 жыл бұрын
I vote for full polish. Just hit it with light polish once in a while, and use flour to clean out the nooks and crannies, then hose it off. An alternative is natural with a clear powder coat. Looks good, keeps a nice sheen and stands up to gas and oil. A little simple green and hose it down every so often.
@Toys4Life
2 жыл бұрын
That would look pretty cool.
@bat5917
2 жыл бұрын
@@Toys4Life I had polished blowers on my race engines and they were actually pretty easy to keep up. Those housings are pretty hard and hold a shine. My only complaint with powder coat is there are a zillion colors to choose from! You could literally match it to your favorite tie. They would first lightly sand blast your case so it would be virgin aluminum, nice and bright. Then color or clear.
@Supercharged287SOHC
Жыл бұрын
There’s still a lot of meat to get rid of ,my advice will be to take the tip of the triangle all the way up to the where the line ends , another suggestion is to port and polish the throttle body
@overlordisgoogle8431
2 жыл бұрын
Great documentation. I'm subscribed
@Toys4Life
2 жыл бұрын
Glad you liked it sir!
@daveoakes6232
Жыл бұрын
Awesome video now I have to go get a supercharger from the auto wreckers
@beaumontracer1640
2 жыл бұрын
Pontiac engine blue metallic. How does this porting operation compare to switching to the Gen 5 blower for added power?
@Toys4Life
2 жыл бұрын
That is a nice blue. They say it gets you closer to the Gen 5 but not quite. Keep in mind the Gen 5 requires the new blower, new or modified lower manifold, Northstar V8 throttle body (to do it right) adapter, and new mass airflow sensor and a new tune . It is an excellent update although I have never seen a quality back to back track or dyno test to really give an accurate number. I will be testing this as I proceed because I am really curious - plus any mod I do, I want to validate it after the fact to see if it worked. I will be doing this at the track to see if the car an run more than 114mph in the 1/4 in 11.8 seconds.
@beaumontracer1640
2 жыл бұрын
@@Toys4Life Real world tests are the only true tests. That's why I like your approach and why I subscribed!
@Lambmit
2 жыл бұрын
I like the red.
@Toys4Life
2 жыл бұрын
I do too - but there are soo many red ones. For a reason I guess!
@RobNtBob
Жыл бұрын
So will those bolts still line up or do they have to be cut? What’s your solution for that?
@Toys4Life
Жыл бұрын
You cut the portion of the bolt off that protrudes.
@jermainepittman1409
2 жыл бұрын
Will this motor drop into my 92 Chevy S10 the complete setup?
@Toys4Life
2 жыл бұрын
Sorry - I am not sure.
@351cleavland
2 ай бұрын
Remember, if you are porting aluminum ALWAYS wear a mask to protect your airways. Have fun and be kind to your body! 😀
@Toys4Life
2 ай бұрын
100% agree, thanks for pointing that out! And that goes for anytime you grind any material.
@filmart430
Жыл бұрын
Any before and after Dyno runs to compare HP numbers?
@Toys4Life
Жыл бұрын
No sir. The cars never been on a dyno,... Yet.
@bat5917
2 жыл бұрын
Why aren’t you using plastic strips on the rotor edges?
@Toys4Life
2 жыл бұрын
I don't believe the m90 has them, it's just got a coating and built to a tight tolerance.
@bat5917
2 жыл бұрын
@@Toys4Life My 8-71 did not have them originally. I sent it to the blower shop and they set it up. Creates that extra seal to maximize boost. When I raced I was class restricted to a certain overdrive, but the strips were an extra edge, so to speak, that helped.
@ProCoach2373
2 жыл бұрын
I'm cringing a bit about taking out so much material that supports those two lower bolts. I bet GM put it there for reliability. I'm going to interpret that you aren't the first to do this with success to gain some power!
@Toys4Life
2 жыл бұрын
I hear you, I copied designs that are tried and true from major 3800 shops.
@zedrone7975
2 жыл бұрын
Have it powder coated the original red
@Toys4Life
2 жыл бұрын
Original was aluminum. I painted it 6 + years ago.
@2smokebabyj683
Жыл бұрын
Whatt TOOL DID YOU USE TO CUT THE METAL
@Toys4Life
Жыл бұрын
Jigsaw, a diagrinder and a steady hand.
@2smokebabyj683
Жыл бұрын
@@Toys4Life thanks for response
@enzofiero2924
2 жыл бұрын
My vote is to leave it raw aluminum.. You can bring the aluminum to whatever luster you're after and it'll look so good in the bay. All business
@Toys4Life
2 жыл бұрын
Not a bad option but I for my setup hard to work around the fuel rail - unless I get a modded fuel rail setup...
@enzofiero2924
2 жыл бұрын
@@Toys4Life you can have the case blasted to achieve your desired finish. Not sure what they used but I've recently had a SBC intake blasted and it came out with the perfect sheen and still looks better than new.
@petepoling5199
2 жыл бұрын
Are you going to mention what grease to use in those bearings that hold the rotors? Thanks
@Toys4Life
2 жыл бұрын
Absolutely, in detail in the next video.
@petepoling5199
2 жыл бұрын
@@Toys4Life on the next video can you mention if you put sealant between the housing and the piece you installed the vice grips to? Just like you put sealant between that piece and the snout? Also if you could mention torque specs to put the supercharger back together that would be great!!! Thanks!
@jermainejames3431
2 жыл бұрын
where can I find the 2.8 pulley
@Toys4Life
2 жыл бұрын
Zz performance.
@jermainejames3431
2 жыл бұрын
@@Toys4Life thank you bro!
@BAPTruckin
5 ай бұрын
GREEN
@Toys4Life
5 ай бұрын
Ya! 👍
@TheFlameInsideYou
2 жыл бұрын
Don't paint the blower housing. Gold plate it and engrave something that has family significance on it.
@Toys4Life
2 жыл бұрын
Um no... Too much$
@k00lkidz4
2 жыл бұрын
id paint the blower white
@Toys4Life
2 жыл бұрын
I'm going to have to rule the white out immediately.. it would be dirty by the time I left the driveway??
@k00lkidz4
2 жыл бұрын
@@Toys4Life true... id honestly go red, black, or a light blue
@IdoWeather
2 жыл бұрын
paint it yellow or blue
@Toys4Life
2 жыл бұрын
I think yellow would show grime too easy - but blue might be an option? Thanks!!
@shirmworm
2 жыл бұрын
Black
@Toys4Life
2 жыл бұрын
Flat or semi gloss black would be a nice change.
@dogman9501
Жыл бұрын
I'd leave it bear 🐻 metal or Polish it
@Toys4Life
Жыл бұрын
At a minimum you would need to clear coat it, otherwise it's going to dull up pretty quick. Polishing it would take a ton of work to smooth it out first.
@Friedbrain11
2 жыл бұрын
Paint it white.
@Toys4Life
2 жыл бұрын
That would be a bear to keep clean don't you think?
Пікірлер: 59