I don't know how I got from memes to this but I don't regret it c:
@CASH-TO-THE-MERE101
4 жыл бұрын
A Box luck
@christiangibbons3110
4 жыл бұрын
Because the time of the video is 4:20. Little did u know... still watching a meme
@CadillacPat1
3 жыл бұрын
@@christiangibbons3110 I'm @ 420 now and love this video!
@himanshugoswamihimanshugos6003
3 жыл бұрын
@@christiangibbons3110 dXzsed
@3131Bubba1313
7 жыл бұрын
Ahhh finally someone pronouncing turbine the correct way 👍🏻
@dielaughing73
4 жыл бұрын
Is there any other way? Some weirdos pronounce it like 'turban', don't they?
@tennessee7727
4 жыл бұрын
I went down a rabbit hole. Starting off with how an AK works then to an AR and then the layout of a Abrams tank then to the engine of the tank I don’t quite know how I got here but I did and I’m glad I managed to get here
@CadillacPat1
3 жыл бұрын
LOL...that's a deep rabbit hole!
@Yojino
2 жыл бұрын
what kind of software that you use to make 3D modeling, 3D rendering, and 3D animation?
@K-Effect
3 жыл бұрын
That should be a perfect fit in my land train. It's nice to have a reliable 9000 hp whenever you need it
@sadiqthamer2180
9 жыл бұрын
perfection thank you
@arafathossen7276
11 ай бұрын
Thanks sam vai for the giveaway, wish I could have one of these amazing powerbank
@davidoladapoolabode8206
9 жыл бұрын
Very good and well explanatory please keep it up.
@migram4190
4 жыл бұрын
I need this in my backyard.
@d0l0b
4 жыл бұрын
I need this engine my room. and bathroom.
@rohitpiyushbhairaval1122
5 жыл бұрын
The Best explanation by superb animation video
@NeoRipshaft
4 жыл бұрын
Sweet, I was actually just thinking about something like this yesterday... the algorithm as always can read minds =p
@Teqnyq
6 жыл бұрын
I've always pronounced it incorrectly as MAN and not M-A-N
@K-Effect
4 жыл бұрын
Whatever works man.👍🏻
@grmasdfII
4 жыл бұрын
Remembering that it's an abbreviation for Maschinenfabrik Augsburg-Nürnberg helps.
@DODSTV
2 жыл бұрын
New friend all suport sayo from TEAM AYUDA FOUNDER.
@agung.borneo.pramono.7663
6 жыл бұрын
Thank you
@veervikramsingh6905
3 жыл бұрын
can you tell which software used to create such videos
@vincenzo4259
2 жыл бұрын
Thanks
@haveanicetime
2 жыл бұрын
What is the software thar makes this animation?
@PointyTailofSatan
4 жыл бұрын
Gas turbines and huge marine diesels. Would be a fun place to work for a geek like me. lol
@tranhai8895
2 ай бұрын
this is the easiest video to understand about gas turbine engine
@henrysetiawan8522
4 жыл бұрын
may i share your video to linkedin ?, this good video and people have to know , really cool
@doktork3406
4 жыл бұрын
Superb animation !
@edmoon360
4 жыл бұрын
Excellent video.
@edwardl.mutale9771
5 жыл бұрын
Perfect solution to energy deficit
@3dknowledge
7 жыл бұрын
Nice video. Quality modeling.
@ramsestrovao5818
4 жыл бұрын
Tem como transmitir essas informações técnicas em português.agradeço
@muha0644
4 жыл бұрын
this video was exported at 24fps but uploaded at 25 fps
@chaoucheahmed2339
6 жыл бұрын
formidable bravo
@JClemente1980
9 жыл бұрын
Loved the video, and the combustion chambers are ingenious! But I have a technical question: the main advantage of the gas turbine is the lower number of movable parts, which increases reliability when compared to piston engines, specially for high power output. My question is if it would be economic to make it smaller (for the 500/600HP range, use a centrifugal compressor (like the one of a turbo), injection of diesel on the combustion chamber. Conected to a generator and only the enough LiPo batteries for 30/45 min of work. Then, on the MAN truck, you would install one 150HP electric motor on each wheel (even making it available in kits to install on trailers, so that they could provide extra traction if needed), and an electronic system where it would be charging the batteries on descends, even disabling the turbine. Basicly, a hybrid truck, where the main innovation is an engine which would need very low maintenance, lighter, lower number of parts and increased reliability. The only question, which would need research, is if the turbine will use the thermal power of the fuel as efficiently as the regular combustion engine, and, most of all, if the power loss due to the conversion of fuel-electric energy/storage-engine is compensated by the fuel saving on the descends, by the virtual elimination of maintenance on brakes, by the security on having full traction (even possibly on the trailer). What do you think? I do have an idea for the new "diesel turbine"... If you're interested, let me know.
@kimmer6
7 жыл бұрын
Gas turbines are fuel hogs. They make sense where you need very high power to weight as in a helicopter. They work great where you need 24 Megawatts up and on line in 10 minutes for emergency utility peaking power. In a vehicle, gas turbines consume too much fuel. its not readily possible to recover their waste heat without having an exhaust fired boiler and condensing steam turbine both driving generators. Guess what? Many utilities shut down large steam plants and built the gas turbine/steam turbine powered combined cycle power plants. These have great fuel efficiency but they absolutely do not like variable loads or frequently changing loads. A combined cycle power plant would not work in a truck that is constantly changing speeds and loads.
@chazdaggett4194
6 жыл бұрын
I think he meant that the turbine would be powering an electric generator which would in turn be powering electric motors on all wheels allowing for better traction and eliminating the need for brakes. I do agree that it would take a lot of fuel, but I would like to point out that the M1 Abrams tank is powered by a gas turbine, so we shouldn't just disregard the idea. Perhaps a small enough turbine could be used with relative efficiency in a truck one day....
@mitchmorganmusic
6 жыл бұрын
this is not a bad idea, although I think the electricity needed for future electric vehicles will be generated in industrial scale in various locations and transported to charging stations. generation would include generation turbines, solar, etc. the most efficient and cost effective obviously taking a larger role.
@oli74111
5 жыл бұрын
I mean, the US tank already operates thanks to a turbine, so it’s not impossible
@marinusdedreu3833
5 жыл бұрын
the exhaust gas outlet temperature would be legally, way too hot. in order to make legal requirements it would end up being far more complex.
@DrTogh
5 ай бұрын
Fantastic👍
@mohammedobaid9214
6 жыл бұрын
Great I love MAN.... It has an experience of about 250 years
@mohamed.heltaweil446
2 жыл бұрын
why when a outlet of gas turbione water washed appeared to be air and not water
@oscargoldman85
4 жыл бұрын
Wait a minute... unless I am wrong, the animations is wrong... or backwards... if the cold air (blue) is from the left, it should turn clockwise (and it does), but the blades look wrong... maybe its just Me... anyone else know what i am talking about? or able to elucidate?... Thanks - Brilliant animation by the way... well done.
@Jb-tl1yi
4 жыл бұрын
the leading edge of the compressor section blades need to face the direction of rotation. (slice into the air to push the air through the compressor). If you view from the inlet end the blades are pointing to the left and rotation is anti clockwise. The heated air at the turbine section is directed to push on the turbine blades to drive that rotation.
@oscargoldman85
4 жыл бұрын
@@Jb-tl1yi Oh wait - I see I think... The hot air(purple) is driving the Turbine, but the cool air is being drawn in at the back by the fans (like a turbo) OK that makes sense... thanks very much.... I still need to work out how the two drive shafts interact, but it all makes sense now... this stuff is amazing.. Thanks.
@householdemail1305
Жыл бұрын
And you exchange to another shaft so cool..!
@householdemail1305
Жыл бұрын
And good emissions!?
@pathrayyar
5 жыл бұрын
How u make these animation.please say how.Using which software.
@pablosartori88
4 жыл бұрын
Hello everyone, I am embarrassed to ask this silly question but, How many blades does a gas turbine have? I am referring to a stationary turbine for electrical generation. Is there a way to calculate it?
@SandorFule
Жыл бұрын
Many many.
@Samovarius
8 жыл бұрын
If those radial cans are the combustors, how are they fed with air? This video doesn't show that. Are those cans in fact fuel premixers, and the combustion chamber axial with the turbine?
@grinofthegrimreaper
7 жыл бұрын
the compressor feeds them, if you look closely at around 1:57 you can see the purple stream (the air compressed by the compressor) being pushed through channels that feed the combustor through their top. Then the hot gases are sucked in by the turbine (which in turn is kept rotating by those very same gases). Follow the colors: blue --> purple --> red --> purple again.
@alexkay2809
9 жыл бұрын
Любимое ремесло!
@markbenedictasi3666
3 жыл бұрын
what sofware do u use?
@anilsharma-ev2my
4 жыл бұрын
Please consider aniroid barometer bigger modal for making electricity Findout formula for it As we increased size then it rapidly changing atmospheric pressure volume changing and turned turbine for making electricity
@chazdaggett4194
6 жыл бұрын
So, why are the combustion chambers off to the sides of the turbine instead of having the chamber be built linearly into the turbine itself? It would seem like such a setup would be better because the fuel would be ignited with the air itself resulting in a more balanced combustion and therefore a more efficient reaction, but please do correct me if I am wrong.
@x1101126
3 жыл бұрын
May be it would be made the whole engine too long.
@captaincope4303
4 жыл бұрын
All that to get 30% efficiency. Over 10000 parts
@willjones7132
4 жыл бұрын
What do you have in the 1.21GW range?
@CadillacPat1
3 жыл бұрын
A nuclear reactor!
@ge3cm
9 жыл бұрын
i like much the explanation i make a tesis about gas turbines in ships
how are these animations made ? :) I mean the program. Nice video! thanks !
@matekochkoch
4 жыл бұрын
The most common programs for this kind of animation are cinema-4d, Maya, and Blender (there are more, but those are the 3 I am familiar with). If you want to give it a try: Blender is open Source and free. There are a lot of tutorials on youtube, but be aware a lot are for older versions, and sometimes it gets confusing, when your screen is different from the tutorial. Either you download a matching softwareversion to your tutorial (older versions are availabale) or you accept a littele bit of flatter learning curve and use the latest product.
@AH-mj1rd
4 жыл бұрын
Can I swap this engine in my civic
@DavidOfWhitehills
4 жыл бұрын
How heavy is the combined GT+generator?
@bharatchoudhary8862
8 жыл бұрын
thank you very much for sharing this video. please can you tell me is there any internship programm for mechanical students in india (assembling plant) thank you
@libanosgedamu7137
7 жыл бұрын
is ok
@albertjoseverapalmar9610
7 жыл бұрын
nice video...
@davecrupel2817
4 жыл бұрын
Stupid technical question. Im assuming that compressor section has stators as well as rotors? I legitimately only ask because they were not shown in this model. Im presuming they do.
@ianinholland8390
2 жыл бұрын
Yes they do, about as many stators as rotors.
@williambaird2008
2 жыл бұрын
Shouldn’t all blades have similar pitch. The intakes are wrong!surely
@ricardomejiarammirez5342
7 жыл бұрын
las pueden compartir en español gracias saludos desde colombia
@jamespayne5638
7 жыл бұрын
how long can an engine run before it needs maintenance
@agroskynd6596
6 жыл бұрын
in different engine is different nonstop work time, begin from few hours for some airplane turbine to 2-3 mount for stationar turbine in large gas transport system
@danialahmed1994
5 жыл бұрын
it depends on 2 factors 1-preventive maintenance dependant on Engine Running Hours 2-Breakdown maintenance when some part is damaged and safety is operated
@smilernok
4 жыл бұрын
20-25 years
@eksadiss
5 жыл бұрын
Ah yes, rockwell automations retro encabulator
@MrUbernoob9000
4 жыл бұрын
Steam is gas which is used to drive turbines using pressure.. So can't we use a pressurised gas that doesn't require burning or destroying it at all, that can be recycled over and over again. Using modern techniques, technologies and more efficient ways of producing and using electricity surely this could be plausible and would also have zero emissions that come from burning fossil fuels that produce steam or combustion ?
@brucenichols9153
4 жыл бұрын
The music spoilt this otherwise good video, no need for it
@parthipanr2890
6 жыл бұрын
Super
@gawthamnivash8616
6 жыл бұрын
which software is used for animation???
@renatoigmed
5 жыл бұрын
AUTOCAD
@mutlaqatan
3 жыл бұрын
@@renatoigmed amazing
@alexlo7708
4 жыл бұрын
Is MAN the same company to MTU?
@l.b.3416
3 жыл бұрын
No, thats why they have different names.
@novakbalazs8357
3 жыл бұрын
M.A.N. 🍻
@rajendramahajan6581
9 жыл бұрын
Very good and well explanatory
@ronpilchowski9898
5 жыл бұрын
if you like this video check out the turbo encabulater video
@MrHabib092
8 жыл бұрын
nice one
@honggangchen8966
3 жыл бұрын
why I want one of those in my garage?
@AntonKramer
4 жыл бұрын
9522 hp is equivalent to 95 automobile engines of 100 hp witch are equivalent to 1000 9.5 hp 2 stroke lawnmower engines....Just to make clear how much 9522 hp is..
@eng.ibraheemali5436
8 жыл бұрын
please, i want a Full course for gas turbine from A to Z
@tomdip2094
4 жыл бұрын
study aeronautical engineering then :)
@Ag89q43G0HyA
6 жыл бұрын
But what are this turbines used for?
@tarb28
5 жыл бұрын
The ones I work with are for power generation.
@danialahmed1994
5 жыл бұрын
these are used in Aircraft Jet engines power generation in power plants
@kimmer6
4 жыл бұрын
The single shaft version is normally used to drive a generator. The 2 shaft versions are commonly used to drive compressor sets as used in oil refineries.
@adrienperie6119
9 жыл бұрын
Why the non axial combustion chambers ? Lenght savings ? Isn't that less efficient ?
@jameslast4369
6 жыл бұрын
Length saving, bearing distance for rotor dynamic? Since the transition piece is a nozzle, I expect no significant efficiency loss
@joshuawilson7201
5 жыл бұрын
I have no idea about engineer stuff but I like building these. Can anyone purchase these? Just curious is all.
@danialahmed1994
5 жыл бұрын
hah buddy power plants purchase this
@elsaicequeen8141
4 жыл бұрын
How Colin put this into an F1 car…
@no_more_free_nicks
4 жыл бұрын
It is not working principle, it is the polluting principle :D
@dr.mostafasokkar4821
8 жыл бұрын
Animation II how it works
@ManojKumar-mw2kv
7 жыл бұрын
what software is used to make such kind of video
@yasirahmed55
6 жыл бұрын
3d max
@samanli-tw3id
8 жыл бұрын
How the engine is cooled?
@thepowerofdreams6816
8 жыл бұрын
Oil and Steam, steam is normally used as a wasteheat recovery system
@crf450r2
8 жыл бұрын
or air
@thepowerofdreams6816
8 жыл бұрын
Yeah, but normally water steam have's a bigger heating disipation capacity than air. Aeroturbines normally does have to be air cooled because would be very stupid trying to put a 100 tons generator steam turbine and heat recovery system.
@crf450r2
8 жыл бұрын
lol yes it wouldnt make sense for the jet ones to be steam cooled, but i know the ge 7fa gas turbines are all air cooled and they are 175mw ish.
@judsonkr
7 жыл бұрын
Compressed air is bled off of the compressor/gas generator and fed into the turbine for cooling. There is no water and no steam used in cooling one of these units. In some applications though, water IS fed into the compression process as well as into the combustion process. While this does result in coolng, the cooling is used to increase the density of the fuel-gas mixture thereby increasing the power output. So it IS cooled but NOT for the sake of systems protection with the exception of some flame-centering applications. Bleed air is still used to coole the turbine in these applications. In combined cycle applications, heat from the exhaust is used to generate steam. This steam is generally either used as process steam or generating steam. In a few applications some of this steam is even fed back into the combustor of the turbine as power augmentation. There are many, many applications for these machines. I barely touched on the possibilities here.
@Salah.alkhalifa
8 жыл бұрын
what's the make of the alternator?
@makantahi3731
5 жыл бұрын
valeo(joke)
@jurassicsparks5220
4 жыл бұрын
The narrator is Speaking about the Prime mover. Nothing to do with The Generator
@kenrose1154
4 жыл бұрын
Can this turbine run on hydrogen?
@smilernok
4 жыл бұрын
it runs realy realy good on hydrogen and oxygen ,,, that is how it works ,,, just like acetylene and oxygen for welding and cutting metal ,,
@CASH-TO-THE-MERE101
4 жыл бұрын
🔥🔥🔥
@Ollitopay
6 жыл бұрын
I see some room for improvement. I would love to speak with some of your engineers about improving efficiency.
@josephastier7421
5 жыл бұрын
The design shown intentionally omits several key components both for simplicity and because they are secrets.
@fisherthomas2493
4 жыл бұрын
Do you have to be intelligent to come up with this kind of technology?
@tedmalley7636
4 жыл бұрын
Put my order in for 1..
@GWRProductions-kg9pt
4 жыл бұрын
wtf is a mayga watt?!
@andiabs2400
8 жыл бұрын
sempurna
@normansaja2800
4 жыл бұрын
Mahal biayaya perawatan dan bahan bakar dari pada pungsi listrik yg di hasilkan.
@ptroinks
6 жыл бұрын
"Used as a mechanical drive for compressors (...)" What the actual f***? What kinds of pressures would be delivered by those compressors? I mean, this thing generates 7-13 MW!!!
@MAN-Energy-Solutions
6 жыл бұрын
Thanks for your interest. MAN Diesel & Turbo designs and manufactures turbocompressors with pressures of up to 1’000 bar. Please visit our website for more information: www.turbomachinery.man.eu/products/compressors
@welshpete12
6 жыл бұрын
silly !!
@maxmarquez2911
6 жыл бұрын
They didn't mention that this is the power source of an A1 Abrams tank.
@franchocou
4 жыл бұрын
@@maxmarquez2911 more likely industrial applications in gas
@lesics61Tiktok
2 жыл бұрын
Who are you
@MitchDonovan
8 жыл бұрын
How much?
@ananda_miaoyin
4 жыл бұрын
Shit. Now I have to look at specs.
@mje3055
7 жыл бұрын
joia
@henri1511
4 жыл бұрын
Such old technology. Nowadays, there are much better and safer ways to move liquids through a pipe. Your engineers are lazy.
@drstrangelove09
4 жыл бұрын
turb-eye-s ARGH!!!
@jakarieahossain7654
8 жыл бұрын
animation is how to work
@ianmcmillan4746
7 жыл бұрын
V
@vijaykumarvijaykumar1492
2 жыл бұрын
🇦🇨
@mk3kxc4u
4 жыл бұрын
This could have been a simple understandable video. Instead, it is confusing and makes no sense
@leontierralta
5 жыл бұрын
uuuufff kzitem.info/news/bejne/lImwuJyKqGODpWU
@ouhnishqpirali8084
4 жыл бұрын
Sounds like spice of crap We need one with the gravity
@_vox5189
2 жыл бұрын
this is boring
@danieldorn2927
4 жыл бұрын
MAN should be renamed to WOMAN because its the current year
@alanmetclaff6718
6 жыл бұрын
@4.12 MAN and the a dome over it. Truth in plain sight. Also this machine runs off of compressed air and is a free energy machine, no fuel required or very little if that!
@kimmer6
4 жыл бұрын
You can't really believe that horse shit, do you? Are you a flat earther as well?
@householdemail1305
Жыл бұрын
A gases expansion coupler ❤
@householdemail1305
Жыл бұрын
I’d put inertia gearboxes to the second shaft
@riccardocapellino9078
4 жыл бұрын
Watching this on Saturday night and deep beneath I know there's something wrong
Пікірлер: 184