🔥🔥🔥 Of course I'm gonna come to Brink for my deck accessories =D
@Spencerwalker21
2 жыл бұрын
Battery holder with a kickstand that would be perfect for the plane.
@hometheaterenthusiast1566
2 жыл бұрын
Very nice. I’ll be integrating magnets to hold the battery pack in place on the backof my steam deck.
@games_revealed
2 жыл бұрын
I would assume that would cause some interference with the deck’s internals
@fugbn2
2 жыл бұрын
Want to have the whole new backplate with a place for bigger extended battery - and full-size 2280 ssd. There are a lot of space for that of the unit became 5+ mm thicker in the middle with additional 150g weight - it would be like 80-90Wh battery
@ized88
2 жыл бұрын
I don't know if the charger holder is the cool version. There is a version that can be "converted" / used as a stand with the lid, too. But yeah it is possible to copy the micro SD card holder on the other side to increase it to 8
@games_revealed
2 жыл бұрын
I’ll do another video on just that once I find it
@ized88
2 жыл бұрын
You have a printer, print the bolt for the stand 🤣
@games_revealed
2 жыл бұрын
Takes time hahaha. I just got done printing the stand before the video
@TheBrickSeparator2020
2 жыл бұрын
That's awesome you'll be giving away some 3D printed accessories! I don't have a 3D printer and I don't know anyone who has one either. My favorite accessory the last one! I would love to see a foldable stand that could fit inside the case pocket! I think that would be cool.
@logicalfundy
Жыл бұрын
Got a 3D printer for Christmas - been printing ever since, heh. Currently printing some Easter related items, but I do have plans to print an accessory that goes into the strap similar to what you showed off.
@AndreVandal
2 жыл бұрын
Battery not so much but SSD, that would be more useful for me
@moisejeanfelix
2 жыл бұрын
i want that charger holder thingy
@Linuxdirk
2 жыл бұрын
7:17 this is actually the best part. You might not only fit the charger in there but also a super duper tiny SD card storage (not the few slots that come with the power adapter holder).
@MobileDecay
2 жыл бұрын
I printed a couple docks. There's not much I really want. I'm trying to think of something to design. I remixed an sd card holder to fit onto the Steam deck but it falls off a lot because the original sd card holder design isn't tight enough.
@TheSnake0444
2 жыл бұрын
you should make custom back plate that supports nvme 2280 size.
@SidecarDonnie
2 жыл бұрын
Awesome video for the battery bank attachment did you need to install a spring or just attach as is?
@games_revealed
2 жыл бұрын
Thanks! Yeah so each latch attachment has a section for a spring, but I didn’t add any because it worked fine with out it right now. I should have noted in the video that if You plan on using it a lot then you should add a spring.
@kewlztertc5386
2 жыл бұрын
My printer is still sitting unopened in my offices. It's big, I had to order a utility desk for it.
@games_revealed
2 жыл бұрын
Nice! Yeah they are big, and I’m loving mine so far
@EsotericWolf
2 жыл бұрын
Hope you can play with your printer soon!
@kewlztertc5386
2 жыл бұрын
@@EsotericWolf thank you . 😂 I've forgotten about it. I bought a new phone (first one in ages), but US carriers have cracked down on many of the cool phones. So my nice new phone (Xiaomi 11t Pro) wouldn't work. After sending it back, I've been so preoccupied with finding a new phone, I completely forgot about my unopened printer. The table I ordered for it won't be here until the end of the month. So I'll be obsessed with it then. 😉
@allhandsonsteamdeck1440
2 жыл бұрын
HOW MANY PEOPLE DO YOU THINK HAVE A 3D PRINTER??? I THINK YOU ARE LIVING REALLY GOOD WHILE THE REST OF US ARE JUST LIVING DUDE
@EsotericWolf
2 жыл бұрын
That's why he said he will be giving some 3D printed stuff away :) Also there are a lot of people in the Games Revealed community that have 3D printers and even those who don't are interested in what Brink makes with his printer. There are also sales for printers and believe Brink (Games Revealed) got his on sale and someone said they got theirs for $100
@MobileDecay
2 жыл бұрын
You can get a 3D printer super cheap now. I'm a broke ass and I have one. I've seen em go for under $100.
@logicalfundy
Жыл бұрын
Quite a few 3D printers are cheaper than the Steam Deck.
@justa_servant6424
2 жыл бұрын
First yay 😁
@EsotericWolf
2 жыл бұрын
You can think that :)
@justa_servant6424
2 жыл бұрын
@@EsotericWolf nah I was here on the dot when it was posted lol 😂
Пікірлер: 31