3rd flight and getting a better feel for the plane. Winds were not as gusty as previous flights and was straight down the runway.
Gray fuselage is difficult to keep orientation so flight was short. Focused on slightly slower flight speed and tried the landing flaps for the first time. Lousy landing, but no damage to the fuselage besides a cosmetic scrap to the starboard nacelle.
Wingspan: 2006mm (79 in)
Length: 2122mm (83.5 in)
Wing Area: 40.18 dm2 (623 in2)
Print Weight: 3460g (122 oz)
AUW: 6050g (213 oz)
Wing Loading: 150.6 g/dm2 (49.2 oz/ft)
Cubic Wing Loading: 23.7
Thrust to Weight Ratio: 0.7
2x70mm XRP 14-blade with 2200kV motors
2x3700mAH 45C 6S Roaring Top
STL files available via Cults3D:
cults3d.com/en/3d-model/game/...
RCGroups Thread:
www.rcgroups.com/forums/showt...
Негізгі бет 3D Printed EDF Airliner - A330-300 Flight #3
Пікірлер: 19