In this video I show how I made a Remote Controlled 3d printed Iron Man Mark 85 Iron Man Helmet with a motorized face plate. I used a cheap 3d printer the Ender 3 Pro to print this and it took about 2 months to make.
This uses a pre-programmed Arduino... the Crashworks3d Alisha Board!
==========3D MODELS==============
3d Model Iron Man Mk85 Helmet by Akira Yuming
www.cgtrader.com/3d-print-mod...
3d Model Motorization Kit by Crashworks3d
www.thingiverse.com/thing:460...
==========CRASH WORKS 3D ALISHA & SUE==============
EDIT: Since I released this video, Crash Works 3D now has various versions of the Alisha board to suit various needs such as a mini version and an all-in-one.
www.ebay.com/str/crashworks3d
==========ARDUINO CODE==========
You only need to mess with code if you want to enable sound or setup the IR Module for remote control. If you just want LED eyes and open/closing the face plate, you don't need to worry about this at all. The Crashworks3d ALISHA board has all the code already on it and ready to go.
To Enable Sound:
github.com/crashworks3d/Iron_...
To Enable Sound & Remote Control functionality:
github.com/dogofpavlov/Iron_M...
==========CHAPTERS==============
0:00 Intro
0:35 Helmet Demo
4:52 The Plan
5:10 The Model
5:27 Sizing the Helmet
8:26 Printing the Helmet
9:02 Sanding the Helmet
9:48 Welding the Helmet
11:08 Filling the Helmet
11:25 Priming the Helmet
12:00 Crashworks3d ALISHA & SUE Board
13:24 Parts for the Helmet
14:50 ALISHA Board Setup
16:40 SUE Board Setup
17:38 Remote Control (IR Module) Setup
20:30 Intro to Arduino (for customizing)
22:15 Installing Arduino Libraries
23:10 Uploading to the Arduino
25:08 Enabling the Sound
26:22 Changing Servo Angles and more
27:38 Enabling the IR Module
30:39 Installing Motorization Kit
31:54 Painting the Helmet
35:14 Hot Glue the Internals & Padding
35:50 Dressing up the Inside
36:04 Final Reveal
37:10 Outro
==========PARTS YOU NEED==============
Here is a breakdown of parts and cost...
-- BASIC HELMET TOTAL $300 (this price includes the Alisha MK6. I'm sure you can find many things cheaper)
3d Print Filament Black - $18.99
www.amazon.com/dp/B09DKTXJQW
Wood Filler - $7.47
www.amazon.com/dp/B09LR9JJPJ
Sanding Paper Various Grit - $50+
www.amazon.com/dp/B09PR5RM3W
Buy Paint from a hardware store like Home Depot or Lowes it is much cheaper than online. $50+
- Rustoleum 2 in 1 Filler & Sandable
- Rustoleum Flat Black
- Rustoleum Metallic Gold
- Krylon Metallic Dark Metal
- Dupli-color Metal Cast Red
- Dupli-color 1K Clear Extreme Gloss
Soldering Iron & Solder - $10.87
www.amazon.com/gp/product/B08...
Heat Shrink Tubing - $6.99
www.amazon.com/gp/product/B01...
22 Gauge 6 Color Tinned Wire - $12.79
www.amazon.com/gp/product/B08...
Micro Limit Switch - $6.98
www.amazon.com/gp/product/B08...
Micro Servo Motors MG90S - $9.99
www.amazon.com/dp/B09KXM5L7Z
Bolt Screw Nuts Kit M3 M4 - $15.69
www.amazon.com/gp/product/B06...
Flexible LED Eyes - $12.98
www.amazon.com/gp/product/B09...
Always On Battery Power Bank - $39.00
www.amazon.com/gp/product/B07...
Hot Glue Sticks - $8.97
www.amazon.com/dp/B06W2NBCW5
Right angle USB Type A to USB Mini 9 inch - $7.99
www.amazon.com/dp/B01N5PHSJE
-- FOR SOUND $40 (including board)
8GB Micro SD Card - $7.98
www.amazon.com/dp/B00VQOEWYO
2W 8Ohm Speaker - $11.53
www.amazon.com/dp/B0177ABRQ6
-- FOR REMOTE CONTROL $7
Remote Sensor Module - $6.99
www.amazon.com/dp/B01HTC5JX4
-- OPTIONAL $41
Helmet Padding - $9.89
www.amazon.com/dp/B07PGF4CTH
Metal Snap Buttons - $17.49
www.amazon.com/dp/B07JKTGJYT
Another set of Flexible LED Eyes for Back - $12.98
www.amazon.com/gp/product/B09...
-- TOTAL HELMET PRICE $400 Roughly
#Marvel #IronMan #3dprinting #helmet #ender3pro #crashworks3d
Негізгі бет Ойын-сауық 3d Printed Iron Man Helmet - Motorized & Remote Control
Пікірлер: 118