Finally someone who gets rid of those nasty 3D print imperfections and doesn’t just paint them and call it a day!
@PixelForgeLab
6 ай бұрын
the metalcast red must be applied on top of a metallic paint
@JCPrototypes
2 ай бұрын
I found out the hard way
@disdudesart5906
5 жыл бұрын
Nice work! I wish I would’ve seen your video before I made mine. Love the polished finish on it.
@JCPrototypes
5 жыл бұрын
Thanks a lot, I really appreciate the positive feedback to keep moving forward.
@silviaplayz
6 жыл бұрын
You should try changing your name to like 3DPrototype or something idk but something that can give u subs ya know
@JCPrototypes
6 жыл бұрын
I won't only be doing 3d printing, I also create with, metal, wood, and electronics. Thanks for the suggestion.
@silviaplayz
6 жыл бұрын
It’s alright :)
@sammyhorrocks2764
6 жыл бұрын
Wow
@cannedharp7589
6 жыл бұрын
You going to have over 100k sub one day
@JCPrototypes
6 жыл бұрын
I wish, thanks.
@JeaniusCompany
2 жыл бұрын
The ear caps insert before paint. oh, man!
@gettingfitat5015
4 жыл бұрын
Very nice work, my friend! Subscribed because of this video alone! Can't wait to watch some more of your stuff! Thanks for the video! :-)
@JCPrototypes
4 жыл бұрын
Thank you very much.
@AB-nv5ti
6 жыл бұрын
I linked to you from your comment on I Like To Make Stuff. Keep up the good work.
@JCPrototypes
6 жыл бұрын
Thank you very much.
@ashfreakinbash
6 жыл бұрын
Good stuff...very cool
@agentmike2222
4 жыл бұрын
nice video! quick tip: level the sound. the intro sound is way to loud.. :)
@JCPrototypes
4 жыл бұрын
Thanks, I'm working on that
@HelloBiffTV
3 жыл бұрын
Dude, nice job! Hope you're still working on these projects!
@JCPrototypes
3 жыл бұрын
Yes, I just had a lot of work at my job, working 12 hour shifts. But there's lot projects coming soon. Thanks
@B-Pronius
6 жыл бұрын
Wow, great work👍
@JCPrototypes
6 жыл бұрын
Thanks a lot.
@DiegoPolBodetto
4 жыл бұрын
Great work. But, how traslucent material you put into the eyes slots?
@JCPrototypes
4 жыл бұрын
I bought them on Ebay
@crazywelderthings6952
3 жыл бұрын
This is honestly the best ironman 3d print I've seen wow!!
@JCPrototypes
3 жыл бұрын
Thanks, it took months to finish it
@dariodesimone1352
5 жыл бұрын
It seems amazing! I can't insert the ears from the inside. How did you do it?
@JCPrototypes
5 жыл бұрын
I had to re-print the ears a little bit smaller
@KnightofNarnia185
3 жыл бұрын
Hi , why wet sandpaper?
@JCPrototypes
3 жыл бұрын
creates less dust
@maxtv1428
5 жыл бұрын
And nice work!!!!
@patchtechuk
2 жыл бұрын
Hi, amazing work! why rattle can and not an airbrush?
@JCPrototypes
2 жыл бұрын
I don't have an airbrush
@eitanpaster5692
2 жыл бұрын
money
@handyishrandyish334
2 жыл бұрын
@@JCPrototypes best reason!
@nuggetpie8807
4 жыл бұрын
Is this mk 3
@JCPrototypes
4 жыл бұрын
Yes
@oanikuttan5563
5 жыл бұрын
Man post the motorised faceplate video? I am waiting
@JCPrototypes
5 жыл бұрын
Thanks for watching, I'll do my best to finish it, I had problems with the servo motors, but I just solved it. I'll show in the video what happened.
@oanikuttan5563
5 жыл бұрын
@@JCPrototypes okay
@VidiasPlayWorldVPW
6 жыл бұрын
Amazing
@JCPrototypes
6 жыл бұрын
Thanks
@lessio_raar743
2 жыл бұрын
Hi! Did you sand the helmet before the red paint? Or you painted with red after the last primer
@JCPrototypes
2 жыл бұрын
wet sanding before any primer or painting.
@kamitsuna
5 жыл бұрын
We need to see the 3rd video man! How did you do the face robotics!
@JCPrototypes
5 жыл бұрын
I'm still on it. Had some personal problems and got a little backed up.
@kamitsuna
5 жыл бұрын
@@JCPrototypes cant wait to see what you come up with
@JCPrototypes
5 жыл бұрын
Third video is out.
@forby_
6 жыл бұрын
Wow, you really got those pieces smooth! Looks great.
@JCPrototypes
6 жыл бұрын
Thanks, It took a lot of elbow grease. I'm working on the electronics right now
@maxtv1428
5 жыл бұрын
What for an infill did you use? And speed?
@JCPrototypes
5 жыл бұрын
I used 25% infill, but I had to re-enforced the print with a coat of polyurethane on the inside. Next time I would go for 35% but that adds hours to the print. I used a very slow print speed, I think I used like 20 mm/s on the parts that would stand tall from the print surface, this eliminates possibilities of fail prints. For parts that where short like the Jaw part of the ear pieces I used 45 mm/s.
@maxtv1428
5 жыл бұрын
Thanks
@maxtv1428
5 жыл бұрын
I Love you
@maxtv1428
5 жыл бұрын
Cura says for all Parts 9 days. Whaaaaatttttttt
@JCPrototypes
5 жыл бұрын
@@maxtv1428 sounds about right
@josep2700
4 жыл бұрын
I like it😃👍
@JCPrototypes
4 жыл бұрын
Thank you
@yasribislam121
5 жыл бұрын
nice good luck you behind iron man full body suit
@JCPrototypes
5 жыл бұрын
thanks, but that would take for ever
@maximusprime6671
5 жыл бұрын
Where did you buy the magnets?
@JCPrototypes
5 жыл бұрын
I bought them from Ebay
@robbedebacker3254
5 жыл бұрын
which 3D prtinter do you use?
@JCPrototypes
5 жыл бұрын
I used the CR-10
@nikitapelipenko6098
6 жыл бұрын
Wow. Good work. Tell me, please, how much will it cost to make this?
@JCPrototypes
6 жыл бұрын
Thanks, I lost track of how much I spent. I would guesstimate about 60 dollars.
@nikitapelipenko6098
6 жыл бұрын
Thanks. Can I buy it from you? My sister would be happy
@JCPrototypes
6 жыл бұрын
@@nikitapelipenko6098 It's my first build, so I might keep it for me. The 60 dlls are just for materials, if we add the man hours that went into it, It would be too expencive. :)
Пікірлер: 76