This is great and will be very useful as I plan my son's bedroom remodel. Thank you for sharing!
@muiTDesigns
Жыл бұрын
Thank You.. 🙏❤️ but try to use small wires and hide it under the LED light so it will be more depth the 3D printed and clean, not same what i did.. hahaha
@BellyDExplorer
2 жыл бұрын
Tuara nigawas najud.. galing talaga.. gusto ko yan..pati Ang kulay
@UrbanCha0s
2 ай бұрын
Great work. Just an idea, could you not place the wiring inside the channel under the LED strips?
@suneetasandeep
2 ай бұрын
Idea is good, i tried some of my designs in 3d printing. The only issue is that the heat of neon led strip deforms the printed part very soon. Tried with petg and Abs both with same issue
@c.g.03
7 ай бұрын
nice work. can you explain how to model the STL? i am struggling to extrude overlapping lines. salamat
@KristaDianeSM
2 жыл бұрын
Go lablaaaaab! 😍🥰😘
@MCU_3883
Жыл бұрын
what is printer completion time
@landohanysz8314
Жыл бұрын
awesome work where did you get those led strips or what are they called?
@muiTDesigns
Жыл бұрын
Hi.. sorry for the late reply.. Thank You.. 🙏 I just bought it here in Qatar 12V neon LED Light (5m/roll)
@aurion61
2 ай бұрын
What fonts did you used?
@mankanek97
Жыл бұрын
What kind of font did you use?
@muiTDesigns
Жыл бұрын
Hi.. sorry for the late reply.. It’s Cartier Font by Graphix Line Studio but i adjust some of the letters to fit the LED when folded..
@someonenormal5579
6 ай бұрын
@@muiTDesigns how did you adjust the letters? Thanks! I want to make one for a friend in her handwriting, but i cant figure out how to make sure the letters will have hte same width with the led strip.
@muiTDesigns
6 ай бұрын
@@someonenormal5579 hello, i did it in autocad and adjust the leghth asper cut size of LED per inch so it will fit. Just don’t follow the wiring of this because it looks ugly.. hahaha
@arfandy99
Жыл бұрын
Interesting work. What is the width of the led strip?
@muiTDesigns
Жыл бұрын
Thank You..❤️ it’s about 5.4mm width x 5 meters per roll..
@mharzinphilturk08
2 жыл бұрын
Sana all jud naay talent nga ingon ani
@97JoMiller
Жыл бұрын
any video showing how you designed the letters to begin with? That's what I'm interested in.
@muiTDesigns
9 ай бұрын
Hi sorry for the late reply, I use autocad by planning the length of the materials, then i use sketchup for extruding. :)
@97JoMiller
9 ай бұрын
no worries, I figured it out with Fusion 360@@muiTDesigns
@thegish1595
8 ай бұрын
@@97JoMiller Did you happen to find a good KZitem video to do this that you could share or did you just do it on your own? I can't find one that is that great. I was looking to do it but I am brand new at Fusion 360. Thanks so much!
@97JoMiller
8 ай бұрын
I just kind of figured it out on my own. I wish I could give you better advice than that, but I'm not good at making videos or really sharing how I do things... I just kind of picked apart pieces of different videos to figure it out.@@thegish1595
@thegish1595
8 ай бұрын
@@97JoMiller Gotcha. Appreciate the reply back!
@mossite
9 ай бұрын
What kind off PLA did you use? It looks kinda transparent.
@muiTDesigns
9 ай бұрын
Hi, i use PETG Filament.. Actually it's a transparent but since there is infill it looks weird. haha
@the-matrix-has-you
11 ай бұрын
Hi, What is the Bed Material you are using looks cool plus it sticks good enough I guess
@muiTDesigns
9 ай бұрын
Hi it's PETG, i used 225-85 using the other side of the glass bed :)
@sebastianikeman
2 жыл бұрын
What did you use to stick the letters together? Just glue?
@muiTDesigns
Жыл бұрын
Hi.. sorry for the late reply.. I just use UHU quickset transparent glue mix together with hardener and binder.. ☺️
@RadioactiveFilms1
Жыл бұрын
how did you go about making the gaps for the led? When I try in fusion 360 I cant edit the dimensions.
@peppernickelly
Жыл бұрын
learning fusion 360 is a process lol after 6 hours of youtube you'll be able to edit any way you'd like
@muiTDesigns
Жыл бұрын
hi.. sorry for the late reply.. I just use Autocad to plan all exact dimensions i need and extruded in Sketchup and export as stl for 3D printing..
@jershy6640
Жыл бұрын
when you create the sketch, you have to do sketch offsets and pick each of the lines you want to offset and I do one on one side and on e on the other side of the line half the thickness of the led strip you are using
@cybernet1154
Жыл бұрын
Type ur letters in then u need to extrude your letter up to desire amount I say u looking for 3mm up then u want to shell 🐚 each letter start at 2mm And repeat the steps to each letter with using all the same dimensions luck my guy
@christiantardieu7561
Ай бұрын
What was your total print time?
@joserotte8742
9 ай бұрын
Una consulta cómo haces para que coincida el tamaño de las letras y donde debe hacerse el corte
@danielalozie9442
2 ай бұрын
Use a 6v power supply for a 12v neon the neon should light up but power/heating will be greatly reduced
@ClaudioMartins-yh7vv
Жыл бұрын
hello what kind os neon led did you use. u saw one and i just can cut 20 cm.
@muiTDesigns
9 ай бұрын
Hi it's a 12 volts neon flexible neon lights which can be cut every 1 inch..
@trafoman2004
Жыл бұрын
You could have left a back recess to hide the wires. You used wires that were too thick.
@muiTDesigns
Жыл бұрын
Yes Sir☺️ I already update the details of this to hide the wires.. Thanks 🙏
@DrGeta666
22 күн бұрын
Not neon
@CarpeDiemLiveSet
2 жыл бұрын
When you cut the light, you don’t check if your are cutting the led ? How do you check the connection between all the cuts ?
@muiTDesigns
2 жыл бұрын
Hi, this led light have a cutting marks every 1 inch and from that you can connect your wire. Perimeter of each letter should be planned so you will know how many inches it will be. Thanks
@CarpeDiemLiveSet
2 жыл бұрын
@@muiTDesigns tks for your feedback, my question is how do you plan them ? The tool you use ?
@muiTDesigns
2 жыл бұрын
@@CarpeDiemLiveSet actually i do it in Autocad so i can get the total perimeter of each letter and input led sizes to offset frame, next i make 3D model and then 3D Print. Everything was scaled 1:1. Thanks
@CarpeDiemLiveSet
2 жыл бұрын
@@muiTDesigns ah ok, can I ask you a favour ? I have led cable that i can cut every 2,5cm. Would you mind to create me a pdf to print of a text with a specific font ?
@kurtdoerfel7620
Жыл бұрын
@@muiTDesigns Did you trace over the text in 1 inch increments and make lines that way? How did you go about making sure your designs electronics would easily connect?
@sooomanyactivities
Жыл бұрын
What font is that
@muiTDesigns
Жыл бұрын
Hi.. It’s Cartier Font by Graphix Line Studio but i adjust some of the letters to fit the LED when folded..
@AlanFernandes-g7n
5 ай бұрын
What is the font of this letter?
@mharzinphilturk08
2 жыл бұрын
Tua ra
@adorabol4186
2 жыл бұрын
Harang .ako nasad sunod ani bay.. ok kaayo
@love_sove_
11 ай бұрын
Can you share this stl ?
@muiTDesigns
9 ай бұрын
Hi sorry for the late reply, this was in my old files I'm not recommending this design because the wires are shown at the back, I want to make another design in which the wires will be hidden inside but no time to do it yet.. :)
Пікірлер: 59