Great build. I love how you really went the extra mile with the small details like no screws from the front and the foldable feet. Good work! 🙂 👏
@FunctionalPrintFriday
Жыл бұрын
thx!
@ImnotChuck.
Жыл бұрын
My favorite part of the PS is the uncluttered look of the inside when it is all assembled. Your attention to detail is outstanding.
@FunctionalPrintFriday
Жыл бұрын
thx! I try and make things at least good enough to not have to stop in the middle of the next project and fix what I did a trash job on in the first place :)
@parisiadrian
11 ай бұрын
Really nice build and I love that blue also. An extra feature you can add is to make possible to the case to be stackable.
@FunctionalPrintFriday
11 ай бұрын
Thx, and that's a good idea. If I ever revisit this design, I'll probably add some insets to stack.
@martinhutchings9708
3 ай бұрын
Great build and design, also the use of my old friend sketchup
@philshel1
Жыл бұрын
Nice design. My favorite part is the folding feet, clever design.
@partsdave8943
Жыл бұрын
I like it all! It definitely has a professional look. Doesn’t look like 3D printed items usually does. More like molded parts. That is a cool color as well.
@FunctionalPrintFriday
Жыл бұрын
thx!
@ciclonerd
Жыл бұрын
Hello! Really like the explanation of the whys of every design decision. I'm learning a lot about it. I'm mechanichal technician and software engineer and as a hobby I'm designin simple proyects with mechanical parts, pre-buit electronics and low level software. All with FDM 3d printing. I'm pretty far from US, cheers from cordoba, argentina.😄
@denrayr
9 ай бұрын
Looks great! I love all of the little details. Would you ever consider a second channel where you post your sketch-up work? I'd love to see what you're doing in real time. A bonus would be to have a little bit of narration about what you're doing. You are very skilled, and it would be a great way for us beginners to level up our modeling skills.
@deadly_dave
Жыл бұрын
I'm an electronic engineer and got a Prusa like 3 years ago and started learning to design boxes for my little electronic 'gadgets'. So this whole two parter was a treat for me. Actually, I said in a previous comment that my feet were my fav part of the build but now I'm not so sure, the face-plate did turn out exceptionally well.
@FunctionalPrintFriday
Жыл бұрын
thx. the feet took forever to get right, but I almost always use it with them down to raise the front. was worth it
@deadly_dave
Жыл бұрын
@@FunctionalPrintFriday I would say it was worth it now alright. The feeling of satisfaction or just "I won" from working hard on something like that and finally getting it to work so well in the end. It makes up for all those times when you put in all the same effort but still have to abandon it. Anyway, really enjoyed that and your other functional prints (Like you I don't care for trinkets, I love using my printer to solve or fix things but to this day, threeish years in and I still haven't ever printed a benchie.), keep them coming :)
@wcgrant5065
Жыл бұрын
Enjoyed the attention to detail in your 3d design. The time and effort really paid off in an off-the-shelf professional looking case.
@FunctionalPrintFriday
Жыл бұрын
thank you!
@barbicantomato6284
Жыл бұрын
Well thought out design there! At first I was thinking the top finger recess would be a cup-holder to hold the mandatory beverage/tinkering session combo.... but those articulating feet are my favorite aspect there. Great job.
@FunctionalPrintFriday
Жыл бұрын
thx!
@RestNPizza
Жыл бұрын
Love the design of the feet on this. I also appreciate your attention to detail and the small accents in the design that take this to the next level. You could have just made a plain box for this to fit in pretty easily but everything you added makes this look exceptionality good and professional. Good job as always!
@FunctionalPrintFriday
Жыл бұрын
did you get my email?
@RestNPizza
Жыл бұрын
@@FunctionalPrintFriday I got your initial email asking me to reply to my comment with the ID number. Was there another one sent since then? I thought I replied to my comment but dont see my reply now...
@JoseAguiloworkshops
Жыл бұрын
I love the the adjustable feets, the honey comb holes and the angles. Your are right, it looks stunning! Don't put me in the contest, I am giving you my comment anyways. Good luck bro.
@fred3jkfotjc16
Жыл бұрын
Part 1 of this video made me subscribe to you. Part 2 - Your attention to detail and eye for design is my fav part. Cheers!
@FunctionalPrintFriday
Жыл бұрын
Thanks! and welcome aboard.
@allanparsons9273
Жыл бұрын
Loved the working out of the electronics in part one
@gregrburnett3400
Жыл бұрын
I like the pretty colors on the screen.
@andyb7754
Жыл бұрын
Great part 2. Very nice and informative video, thank you. If I could only learn 1/1000 of what you know and can do it, I'd be happy as all get up. One day I'll learn CAD, hope it's before I die!! LOL
@FunctionalPrintFriday
Жыл бұрын
just jump in. The first thing I ever made I could do now in 30 seconds and it took me 2 hours lol. Gets easier quick
@jesusamayo7035
17 күн бұрын
Gracias por tomarte el tiempo para realizar los diseños me encanto lo usare para mi fuente estoy por armarla
@FunctionalPrintFriday
17 күн бұрын
de nada y gracias por tu comentario
@netgodsrdn
Жыл бұрын
Cool project. I like the front feet design.
@FunctionalPrintFriday
Жыл бұрын
Thanks!
@MarcelHuguenin
Жыл бұрын
Great design, turned out really nice.
@FunctionalPrintFriday
Жыл бұрын
thank you
@houduinodemaster683
11 ай бұрын
My favorite part is, after all the sourcing, planning and cad, the first step of your build was to grind the screw heads down to size. Is that cad Sketch Up? Thanks to your video, my wife can understand the need for me to upgrade my psu. Thanks again.
@FunctionalPrintFriday
11 ай бұрын
lol, it's true! I ground them down to near paper thin at the ends to avoid having to make the bottom thicker. Not sure if they make fasteners with that type of head, but I embrace modifying when I can
@flexzuu
Жыл бұрын
Two main things i really like about this design, the visual accents which make it look much more like actual equipment, like you said in the video and also learning about the RIDEN. I need a Lab PSU for some other project but did not know about this so prolly will build this. Downside is i need a bigger 3d printer as it will not fit on my voron zero :D
@FunctionalPrintFriday
Жыл бұрын
thx. time to upgrade. can't beat a P1S right now
@CoffeeVector
Жыл бұрын
So I'm a total n00b at CAD due to a combinstion of being primarily a programmer and always just winging it in FreeCAD instead of studying tutorials, but I noticed you used SketchUp. I kinda got the impression that it not for "real" engineering, but clearly it's working and I remember it being way more intuitive before, but I never used it for 3d prints. Do you prefer it over CAD? Are you using it to avoid expensive licenses or the learning curve? Or maybe a different reason? I noticed some cumbersome things like pocketing the hexagons individually rather than doing them all together and needing to create the facets on the corners manually.
@FunctionalPrintFriday
Жыл бұрын
yeh, it's amazing what you *can* do with it, but it's really not the right tool for the job. I'm thinking of trying to learn onshape
@bwselectronic
Жыл бұрын
Looks great‼️ I really like the bevels on the case. It definitely looks well designed and much better than a normal squared off box. I look forward to making the enclosure for my power supply. I haven't decided if I'm going to modify the design and have a dual supply with a smaller 2nd power supply. I was wrong. It is buck only. I've got 60v batteries so I can go higher on output. I do have some lower voltage buck/boost power supplies. Aliexpress descriptions can be confusing especially on late night purchases😂
@FunctionalPrintFriday
Жыл бұрын
it'll fit two of the supplies linked in the vid description. I toyed around with the idea of trying to parallel two of them, but if one fails (or sags) in the future you'd kill the second one right quick.
@MrRitzyVlogs
Жыл бұрын
I enjoyed the shadow line used for the front bezel.
@diepurpledino
Жыл бұрын
I like the color choice and features of the case. I would like to see the CAD files added to remix a longer case for the bigger supplies - I've got an RD6018 with a full-size supply ~800W in the metal case typically packaged. I'd like to have more, so this is a good option. One concern is flammability - there aren't many UL-listed FR plastic filaments on the market and in any real variety of colors, you might get white and black and that's it.
@FunctionalPrintFriday
Жыл бұрын
Yeh, that's fair on flammability. I'm toying around with the idea of providing access to the native design files with patreon or memberships or something. STL's will always be free though.
@thepctech
Жыл бұрын
I really liked the feet design, the positional locks are a really great idea. I have a question about the TPU feet in back. With the AMS system could you print the feet in place? Maybe with a pin and barbs to hold them in? I have seen some clips there the hinge is made with TPU and the rest of the clip is something else like PETG or PLA. I'd like to see a follow up video where you model the back feet and build the TPU foot into a print in place example, kind of like you did on the front feet. Just a piece of the back foot area with a filament change to TPU using the AMS. Multi filament prints could make many prints more functional.
@FunctionalPrintFriday
Жыл бұрын
The AMS doesn't like TPU unfortunately, but they're easy to pop in. I tend to print the TPU stuff on my MK3 because it just handles the flexible stuff so well
@kg223kg
9 ай бұрын
Hello! What is the weight of the case - all the printed parts turned out? (without power supply and RD 60 xx)
@StephenWestrip
10 ай бұрын
I am no designer but a couple of suggestions. TPU feet on the flip-feet so that when they are in the flat position the unit rests on 4 TPU feet. Second suggestion would be heat inserts (can’t see whether you have used them or not) particularly for the fasteners you would need to unscrew/screw back in if the unit needed servicing. Great design though and aesthetically pleasing!
@davidpytka347
7 ай бұрын
really enjoyed video a design. i have a RD6024 with a 1500watt power supply and would love to modify design to fit larger power supply any chance i could grab a step file or equivalent to make slight mods in onshape?
@FunctionalPrintFriday
6 ай бұрын
sorry, no step files as this was done in sketchup
@MrNewman64
5 ай бұрын
favorite part: blue cover, sketchup drawing
@SianaGearz
10 ай бұрын
I have one of those blue PSUs that look like that, probably same manufacturer/series, mine is 24V/4A i think, i ordered one for myself and another for DiodeGoneWild from a different seller. He tested his and was almost satisfied with its safety, except the Y capacitor was not safety rated, which is not great. One that i got has a safety rated Y cap, and i have no reason to suspect that it may not be genuine. You can see the blue disc-shaped one on the boundary from primary to secondary, give it a good look. Another sketchy detail i noticed was potentially bad isolation between a surface mount component on the secondary and the heatsink, i was a little afraid what might happen after some vibration, so i jammed a piece of Kapton tape in between there - it guaranteed wouldn't be lethal but i thought it was a good extra assurance. Most reassuringly the construction of the transformer seems really good, it's often sketchy as all hell in no-name PSUs from China, nor are there any temperature related potential problems and the over-current cutout works good as well. Of course the keepouts and spacings on the PCB between pri and sec are observed as well, which is of course step 1 where many sketchy PSUs show that they're not to be trusted, but there's plenty of those where the PCB is designed correctly but something else fatally lets it down.
@dr3ifach
Жыл бұрын
Nice build. Question: How did you mount the buck converter for the fan inside? I assume you didn’t let it float free. Obligatory video favorite: I like the aesthetic you build into everything, along with the modularity (removable back panel and bottom panel). I usually just throw in some chamfers and call everything good 😂. Also, after 8 to 10 hours of designing in CAD 15:33 is what my dreams look like.
@FunctionalPrintFriday
Жыл бұрын
lol, thx! I put thick heat shrink over it and then zip-tied it down to the heatsink on the main PSU
@michaelhenecke
9 ай бұрын
my question may have been asked before, but why didn't you design it with heat set threaded inserts?
@garybarford6108
11 ай бұрын
Great project, what are the spec's on the case fan and where did you get it, cheers Gary Barford
@FunctionalPrintFriday
11 ай бұрын
thx!, and good catch, I just added it to the parts list in the video details
@derekfarealz
Жыл бұрын
the cad footage!
@ivolol
Жыл бұрын
Earthing? And I'd get a 50C degree bi-metal switch for the fan if you want it off at low-loads. Love use of the feet.
@FunctionalPrintFriday
Жыл бұрын
Thx! The switch isn't a bad idea, but I may just slow it down to keeps temps consistent vs. cycling. What would be the value of earthing for this specific build?
@ivolol
Жыл бұрын
@@FunctionalPrintFriday The fact the module has a big ol' earth jack on the front, if the PSU inside should be floating / how much resistance should its ground have to earth ground, is it chainable; It's basically thinking about what paths should or shouldn't electricity take with respect to earth in both working modes and failure modes. A lot of the time it's interaction with other devices which are or are not themselves earth-referenced.
@FunctionalPrintFriday
Жыл бұрын
@@ivolol the PSU was pulled from a steel POE switch which was definitely grounded, but I don't believe there's any need to reference ground for the new application I'm using it in. That said, it sounds like your knowledge in that area exceeds me, so I'll investigate further when I have the time. If there's no measured potential between either DC terminal and ground, is that sufficient to omit the ground for this application?
@gregrburnett3400
Жыл бұрын
I downloaded the stl's and sliced the case and bottom and back panels... 3 Days, 3 hours and 9 minutes. Wouch.
@FunctionalPrintFriday
Жыл бұрын
let me know what you think when you get it all together
@FunctionalPrintFriday
Жыл бұрын
did you get my email?
@gregrburnett3400
Жыл бұрын
Yes; I thought I replied here, but now do not see it.
@deadly_dave
Жыл бұрын
Those feet... Yeah my fav part is those feet but the whole case is awesome.
@niceguy60
9 ай бұрын
What software did you use to design the enclosure
@FunctionalPrintFriday
9 ай бұрын
sketchup make
@noanyobiseniss7462
Жыл бұрын
You need a thermister to control that fan.
@FunctionalPrintFriday
Жыл бұрын
I might just slow it down a little.
@Qubnix
8 ай бұрын
Will you make case for riden 6024?
@FunctionalPrintFriday
8 ай бұрын
I believe they are the same dimensions, this case should fit
@Qubnix
8 ай бұрын
@@FunctionalPrintFridayOk, thank you I will check it.
Пікірлер: 76