Thanks, I enjoy your approach to instruction. Very informal yet detailed. Looking forward to additional assistance from your site.
@toonz153
2 жыл бұрын
As some one new to 3d printing i struggled with bed leveling so much but this helped so much I cant thank you enough,Subbed!
@PredatorMounts
Жыл бұрын
Great video. Yours is the first I've seen recommending leveling with 9 spots, instead of just the normal 5 spots (4 corners and center) the two concentric overlapping squares really help to get the bed completely level. I didnt download your file, I just moved my print nozzle to those spots, in the order you showed in the video. Bed came out leveled , with a magnetic removable bed line. And the other thing, saying that you want "a lot of friction" between the paper and print head, not a little, also helped my problem of the first layer not wanting to adhere evenly to the bed.. so thanks again!
@McTaggy
Жыл бұрын
This video is soooo helpful and informative. Thank you so much for showing the different effects of the unleveled bed
@WendyDaCanuck
2 жыл бұрын
If only it were as easy as all these videos say it is. I’ve been trying to level mine for a week now. One corner is always too close to the bed and all the other corners are way too far away.
@manosm.4718
2 жыл бұрын
i had been trying for over a month until a couple of minuts ago i finally did it after soo many failed tutorials,the step diagram helps at 1:10
@slash_games4538
5 ай бұрын
@@manosm.4718you a life saver lol i did not wanna watch the whole thing and that worked great
@ValVanni
5 ай бұрын
I’m having the same issue… for months
@user-th2jf5id4p
4 ай бұрын
@@ValVannisame
@quantisedspace7047
4 ай бұрын
Same with me. I have to tighten on handwheel all the way, with another one so loose the handwheel is actually about to fall off. However, this is all irrelevant if you can't get your Z Offset set correctly. It would help if the video showed how this worked in conjunction with manual bed levelling and auto bed levelling. The latter determines a mesh so that it can compensate the Z position appropriately according to it's XY position. So, where exactly does the nozzle have to be for the Z Offset to be valid ?
@TK4619
2 жыл бұрын
Great video, Creality should hire you to rewrite thier manuals, Your video actually explained to me the issues I was running into with my new ender 3 max
@EskimoJoe907
3 жыл бұрын
Thank you for the examples. Very helpful.
@TheRealUnknown01
2 жыл бұрын
I'm currently taking a class to learn how to use a 3d printer, this video helped out a lot, thanks.
@dead_zombiemaxyt9371
3 ай бұрын
Thanks so much for this, I've been trying to level my bed for about a week before I found this video, I now how a perfect first layer. Thank you so much
@XboxHanakman
Жыл бұрын
I appreciate it. Just got my first printer and have a lot to learn.
@henricoderre
2 жыл бұрын
To level the bed, I believe Creality tells us to home the hot end, then disable the stepper motors to move from corner to corner and raise or lower these as needed. Problem is, when I follow this procedure I can never get the bed level the first time. It was infuriating. Then, I read an article someone wrote on the net. He said to stop using disable stepper motors. So, to move from corner to corner, I had to use the Move command. Doing it this way, I was able to level my bed the first time around! My print is perfect.
@odeball22
2 жыл бұрын
I'll try this I have and ender 3 and the thin ass aluminum plate they use is garbage.
@MrBearBlanket
2 жыл бұрын
@@odeball22 IUI
@quantisedspace7047
4 ай бұрын
I don't see why people say to disable the steppers. Surely, this would just make the Z axis loose and prone to moving up/down when you manually move the X axis ?
@Bezem1944
3 ай бұрын
@@quantisedspace7047 because moving it without disabled motors generates electricity that goes back to your electronic module and could damage it
@Flannel_daddy
Жыл бұрын
Thank you, this almost perfectly leveled my bed.
@Solascriptura4463
Жыл бұрын
Just what we needed and done well.
@eraserkirill7302
2 жыл бұрын
Helped really well, thanks!!
@malpv
2 жыл бұрын
Crack! Muchas gracias! ni mas, ni menos, justo y preciso.
@YourMomPlaysVideoGames
9 ай бұрын
Brilliant! Thank you for the easy explaination!
@jackstephenson4660
Жыл бұрын
This is helping me set up an Ender 3 Pro for the first time.
@danilaz504
2 жыл бұрын
Thank you very much for this, helped me perfectly.
@WesternScienceUSA
2 жыл бұрын
Thanks bro i used the two files and got my ender 3 pro leveled to print good now.
@TylerHeim
3 жыл бұрын
yooo thank you so much!
@theoisallesgoed
2 жыл бұрын
Thank you for this tutorial! However, my letters are not very clear, I can barely read it. Do you have any tips to improve the precision of my ender 3 pro prints? Any help is really appreciated! I am using general PLA, 0.4mm nozzle.
@mesmerrr
Жыл бұрын
Where do we find the gcode file at 0:56
@user-sh7bc5ls5v
6 күн бұрын
Great Video and you helped a ton to get mine level
@x4ndr3x
29 күн бұрын
Thank you so much for this video! I learned a lot and found it very informative and easy to understand. Keep up the great work!
@steveliljestrand1206
3 жыл бұрын
Thank You very much. your instructional video is excelent
@LucaHedger
2 жыл бұрын
This really helped
@isidoreaerys8745
3 жыл бұрын
Your cat is adorable
@rb-ro2po
2 жыл бұрын
Thanks for this
@jfksuperman2062
Жыл бұрын
Your a life saver bro
@carsonmitchell7560
2 жыл бұрын
thank you so much!!
@GentlemanTrooper
Жыл бұрын
thanks for the help
@KingWunn
Жыл бұрын
thank you for this
@yazlmdestek5454
3 жыл бұрын
Thank you it helped me.. :)
@matthewtowes3266
Ай бұрын
Thanks great video
@manosm.4718
2 жыл бұрын
ever since my moms coworkers friend that works at our local university came to bed level my bed beacause i just could not after many tutorials i finnaly did it and the bed leveling test went better than yours,thanks a lot bro
@AH-zs3vm
2 жыл бұрын
Thank you help me set up one of my Ender 3 machines. I have a few Ender 3 Pro's and tried to use the bed level file but it just went through the motions without stopping at each point. Do you have one that will work on Ender 3 Pro's with Marlin?
@marcosyy87
Жыл бұрын
Thanks
@alexdedogemaster7228
2 жыл бұрын
thanks
@carbonfibercreationswashin7213
3 жыл бұрын
How.do you print a big part but in sections that need to be glued together?
@ohmazio7836
Жыл бұрын
hi there, may i ask your gcode for the Bed Level - Ender3? the one that you can automatically use the screen to move the nozzle?
@razetoxins2482
2 жыл бұрын
I enjoyed the video and the cat made it better.
@pablomartinez1504
2 жыл бұрын
Whenever I try executing the g-code, my ender 3 pro does not stop at each point. I have to manually pause the "print" at each point. After that, it doesn't resume once i hit resume. Anybody else have this issue?
@user-zf2ie8mq8m
11 ай бұрын
having took a break for a while and watching a similar video on leveling is probably what took my bed so far out of whack... x plain if you adjust positively on one point you have to adjust negative on the direct diagonally opposite point as these create your X leveling 5 points 4 tips one mid
@LukeyBoyAndTheCatlings
27 күн бұрын
God leveling the build plate is like using an etcha sketch for the first time. Trying to remember what way goes up and down.
@alixezman5168
2 жыл бұрын
great vid. thx for sharing... But shouldn't we configure the Z offset as well? you didn't talk about that
@pablomartinez1504
2 жыл бұрын
What can I do when the skirt will stick to the print bed, but when it comes time to printing the squares, the filament WILL NOT STICK to the bed and just for a mess of jumbled pubes near the hot end! I've tried cleaning the bed really thoroughly with alcohol and leveling like the previous steps. Any reccommendations? Maybe try extruding more filament at a time? what setting would I change for that?
@cri8tor
Жыл бұрын
Leveled the bed, preheated it and selected the file for my first Benchy test print. Watched in disbelief as the nozzle chiseled a perfect Benchy shape into the glass. For unknown reason(s) the z axis would not move up and didn't realize what was happening until it was too late. Thought I followed all the instructions. Changed the nozzle, but definitely need a new piece of glass. Will try to level the bed again using your files to level and calibrate. Any ideas why my nozzle dug into the glass? Cheers
@mikeolson1629
3 ай бұрын
when running the gcode it never stops at any of the positions. it runs through all nine but never stops to be able to use paper. anyone else having this issue?
@yasin_uyghur
Жыл бұрын
Could you please update the Bed Leveling GCODE - Ender 3 (2020) for Ender 3 Pro ?? It's not working as expected , I can't pause or stop so I can not test with paper .
@Ferferrol14
2 жыл бұрын
I liked the video just cuz of the cat toy hahaha. Nice tutorial btw. Thank you!
@Live2playloud
Жыл бұрын
does the Gcode work for the ender3 pro or just for the ender 3?
@NOXFPV
2 жыл бұрын
Liked and subbed.
@workingTchr
Жыл бұрын
On my new Ender 3 Max there is the issue that even if I get bed leveling to come out with the paper test, the nozzle is still too high for good adhesion. I think something is going on with the z-axis shut off switch that's keeping it from going too low. In the latest Creality software for the Max, you can't set a negative z-axis offset to compensate. So I'm going to just get the CR Touch device, disengage the offset switch (as CR Touch tells you to) and let technology fix this for me.
@TFIta369
2 жыл бұрын
I would like there to be a center knob too as sometimes my corners are good but the center seems to be tighter to the hotend. 😔
@imfobk
3 жыл бұрын
What about shims? To zero it tighter?
@qaisurrehman7106
3 жыл бұрын
thankyou soo much for this video could you please share stl for this calibration print
@annikauppendahl850
2 жыл бұрын
The link to the g-code file is missing.
@smackattack854
Жыл бұрын
How do you fix the middle?
@HOODKansasCity
Жыл бұрын
I can only get the stl file for squares never got the GCODE for the paper setup
@chilson88
6 ай бұрын
quick question, for the G-Code bed leveling it states its only for the Ender 3. what is the main difference between the 3 and 3Pro that it will not work for the Pro.
@szpecunio
3 жыл бұрын
Why am I watching this I don't even own a 3d printer lol
@Abyssthekid
Жыл бұрын
Hey it not expensive trust me just get a ender3
@temidirehamzaht8169
Жыл бұрын
Me too twin
@codeza_shadow7659
Жыл бұрын
Same
@skmgeek
Жыл бұрын
@@Abyssthekid some people don't have hundreds of dollars laying around lmao
@Abyssthekid
Жыл бұрын
ender 3 is only 100$
@EAGLESfan317
3 күн бұрын
does the g code (levelling) not calibration for the ender 3 v2
@lolyouwontfindme6070
Жыл бұрын
Does this work if I have a CR touch installed?
@jkh6668
3 жыл бұрын
I think the GCode you provided is not working properly, im not seeing a continue option and it just goes around the print bed not stopping for me to level it out with the paper.
@dallstirling5344
3 жыл бұрын
I think they paused it every time the printer was at a corner
@3DPrinterAcademy
3 жыл бұрын
It should work, however it might depend on firmware / printer you are using
@thatunknownguy2680
3 жыл бұрын
Liked and subscribed only because of the kitty. Lol Kidding. Great job, Bro!
@eclipsehorizon7655
Ай бұрын
Do i need to do this before every print?
@Jake-il1hx
9 ай бұрын
Is there a new direction bed level test
@thekingofrozz4978
Жыл бұрын
how do i level the middle of the bed?
@SenorCrota87
16 күн бұрын
When I try to level the bed or even when I click auto home the nosel is still around 5cm above the bed, what should I do?
@user-go5lr5zs2y
2 жыл бұрын
may i ask where can i get the gcode for bed leveling? i have some bed leveling problems on my ender3s1
@3DPrinterAcademy
2 жыл бұрын
on my website 3dprinteracademy.com
@bertuncaydin8384
2 жыл бұрын
For example left bottom corner prints half of the square but then starts skipping the rest. In this situation bed is high or low?. Thanks
@scottiechampion6054
Жыл бұрын
Whats the gcode files u talk about?
@Guhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Жыл бұрын
What I do is just disable steppers and manually do everything and looking at the gap between the bed and nozzle to make adjustments, works pretty good and uses no filament, no paper, and only takes a minute
@quantisedspace7047
4 ай бұрын
How do you stop the nozzle moving up and down, with the steppers disabled ?
@ermate
8 ай бұрын
I downloaded and tried the gcode that you use after rough leveling. My printer does not stop between the corners so I can not calibrate. It just walks through the steps and then stops. Does anyone know why is that?
@quantisedspace7047
4 ай бұрын
Yes, it's because certain variants of Marlin firmware have disabled the G Code command corresponding to the 'pause' function.
@ermate
4 ай бұрын
@@quantisedspace7047 thanks! This would mean that I’d need to edit the g code myself to make it work somehow? Or it will not work on my machine at all?
@Loppy956
2 жыл бұрын
How do i download the gcod
@Gamerguy10yt
8 ай бұрын
also use 250 for nozzle temp ( it reduces stringing )
@M-savv
Жыл бұрын
Where do I find the g code
@ryancannavo
5 ай бұрын
Awesome video the gcode is not showing for leveling on your site
@rondog31
Жыл бұрын
Thank you so, so much my mom and dad could never figure out o why it would print sometimes and not, now I'm printing a T-rex for my collection of 3 things when my 3d printer worked and I've been havening it for 3 months.
@redjr16
Жыл бұрын
How to level the center of the bed?
@kunumari6478
Жыл бұрын
can you please make a video about active bedleveling or just bring the paper method back on youre website
@Tuco-js
2 жыл бұрын
Leveling up the Anet A8 is a fricking nightmare lmao
@mintygxmer3876
2 жыл бұрын
Where are the links
@expressivecardsngiftsbykim
Жыл бұрын
So the file does not stop at each corner so you can test the paper? Instead it put little indents in my mat on the bed.....
@scothick1973
Жыл бұрын
No matter how much I turn the wheels I cant get the nozzle to hit the bed level? Any suggestions?
@danwebvideo
Ай бұрын
Nice video but.... you have to realize that Z axis end switch doesn't stop on the same point. I have small 3cm wheel mounted on Z Axis thread rod to see the moment where auto home stops. I've found that it stops on 2 exact positions. where one position is occuring is more often. The recipe for that is make a reference where the wheel is stopping more often (lower position is better) and do several auto home attempts to reveal if this point is still the same or not. Then notice the points. Do bed leeling on this noticed more occuring point. When print is started just watch the knob wheel in phase before extruder heat-up will do auto home. You have still time to cancel print in case that Z-axis rod will stop on bad point. In mine case the diference betweeen points is 0,6mm / 6 0,1mm steps. Let me know if your Z-axis switch is stopping threaded rod in the same position or not.
@relms140
3 жыл бұрын
Comments are good for the youtube algorithm :)
@officalearth
3 ай бұрын
Quick question: When the bed is hot, where is the heat being generated from, i want to know before i accidentally burn myself trying to turn the gears.
@themuddyrug55
6 ай бұрын
That bed has seen some "learning" haha
@liam891
2 жыл бұрын
When u. Said press continue to move the bed to a different corner how did u do that exactly??? What software or file. Can I download this and try it for myself
@eldoodesofresh825
2 жыл бұрын
If you have an Ender 3 you just have to press in the knob
@MrMoonPanda
3 жыл бұрын
Left a like since it’s ur first video also this comment don’t give up
@3DPrinterAcademy
2 жыл бұрын
Hey Mr. Moon, thanks for being the 2nd comment on my channel!
@apriljoamy
3 ай бұрын
my back two corners are way to high and I cannot lower them any more....how do I fix that?
@moek28
2 ай бұрын
It's impossible to level the beds I have 2 printers v3 and v3 2 the v3 2 seems to have parts mixed and matched I have to adjust my bed for each print everything
@ZEUS-2099
Жыл бұрын
how do i make my own file where the nozzle of my 3d printer just hovers over the bed??? everyone has a ender 3 but not the ender 3 max.
@muhammadfuzail1574
2 жыл бұрын
0:00 a 3d printer’s friend was born
@Jake-il1hx
9 ай бұрын
It would make this process so much easier but I don’t know what to look up to get it
Пікірлер: 197