This kit seems really tempting. Very cool video Scott!
@greatscottlab
8 жыл бұрын
+Benklett Thanks mate
@Jacob-qq9cg
8 жыл бұрын
+GreatScott! Cool vids keep it up bro
@tomhansen123
8 жыл бұрын
+Benklett i never had good luck with kits, i started with a cheep kit and never got it to work. the printer i have now is good but i had a few problems with it but nothing i couldn't fix. its the xyzprinting davinci I re flashed my so i could any kind of filament.
@ArroyoAirsoft
7 жыл бұрын
Benklett message me @ connorbchavez2002 gmail I'll sell you mine for $150 fully assembled- I don't want it anymore :)
@jonalampert
8 жыл бұрын
Can you do a in-depth guid on how to build the heated plate?
@ericbower2256
5 жыл бұрын
Buy it, wire it
@quinxx12
3 жыл бұрын
@@ericbower2256 I guess he means the arduino part
@zaprodk
8 жыл бұрын
Shoeprint - WTF :D
@xuNsh1ne
5 жыл бұрын
Shoeprinter
@Fluburtur
8 жыл бұрын
I saw some of those in the last Paris' maker faire, I know a french brand makes similar ones (if not this one) It's very nice to see them work, and they are compact as well
@TechnoidProduction
8 жыл бұрын
Could you make a follow up video about the printer???
@barryownt
8 жыл бұрын
I ordered a delta printer from ali but without a heated bed so the prints come off very easy. I will be taking a look at a heated bed. Thanks for making these kinds of videos, I love watching them :)
@cannonball7
8 жыл бұрын
I didn't see the heated bed thing anywhere. That little snippet with changing the heated bed pin and motherboard type in pins just saved me from pulling my lust clump of hair out. Other than that, this printer is the best 3d printer I have used after tinkering. Thank you for making this video
@DerFailer
7 жыл бұрын
I have tried the same. I have the same heated bed from the video and changed the pins. But the bed won't turn on. Do you have any ideas on this?
@cannonball7
7 жыл бұрын
Us the RAMPS test code on your printer. I had a bad MOSFeT on my first board.
@TheCybercrash
8 жыл бұрын
Great video and very interesting topic. Could you make another episode on 3D printing? What software, what to look for, which material to use, etc.
@greatscottlab
8 жыл бұрын
+RcCopterGuy Sure
@shivalwolf
8 жыл бұрын
I have been considering this 3d printer but i wasn't able to find alot of info. This video confirmed my decision and i have now ordered one.
@ericlau3954
7 жыл бұрын
A great video, Scott! Are you still working on this Delta 3D Printer? It should be nice if you can consider to make a following up video on this machine's performance and your new experience on 3D printing.
@dompfahr
8 жыл бұрын
bought this and built it. Very satisfied with the results!
@knightsofjupiter753
5 ай бұрын
This really showed me how hard 3d printing was
@jbeanp1
7 жыл бұрын
One tip for the belts staying taught is using the spring from a clothes pin. You take the spring part and touch it to the belt with the arms facing out and the pull the belt inside the arms so that the arms are kind of pulling the belt towards the center. Idk if that is understandable, I can explain further if needed. Anyways it helps keep my belts more taught
@Huskie
7 жыл бұрын
I forgot why, but that's not a good idea.
@liamsmith8518
4 жыл бұрын
Wow... How far 3D printing has come
@taow
8 жыл бұрын
Awesome video! I have my own prusa i3 (but the steel and aluminium extrusion model) and it works fantastically. The delta printers look so cool though I think I'm going to get one! thanks
@TMS5100
8 жыл бұрын
+The Art of Weapons delta printers have many problems. read this before buying one. www.reddit.com/r/3Dprinting/comments/2kcwyq/delta_vs_cartesian/
@Strawberrymaker
8 жыл бұрын
+The Art of Weapons problems begin with slower speeds due to much more calculation the arduino has to do, and those 16mhz arent enough
@junuhunuproductions
5 жыл бұрын
So did you like it? I didn't have much fun with this printer haha
@kieferonline
8 жыл бұрын
Wow, this is an awesome project! Unfortunately for me, it looks like the assembly process is beyond my technical ability. Maybe someday I can try this, but watching your channel helps me learn more in general.
@VirgilAnderson769
8 жыл бұрын
I really enjoyed this video Scott. That delta printer kit is really awesome. I am really tempted to buy one. Keep the great vids coming.
@ethanmye-rs
8 жыл бұрын
Make sure that you are "smooshing" the plastic on that first layer - on blue tape, it really ensures a ridicules level of adhesion. Over extruding on layer one by around 10-20% also helps.
@JJiG
8 жыл бұрын
This makes me want a Delta printer more.
@woodandstuff
8 жыл бұрын
Beeindruckendes Projekt. Ich habe selber gerade 700€ in ein Mendel90 Kit investiert und bin ein bisschen geschockt über teilweise schlecht-gedruckte Bauteile und andere/falsche Komponenten als beschrieben...Eine echte DIY-Challenge haha. Ich hoff jetzt nurmehr, dass die 3D-Drucke was werden :/
@vijaysridhara
8 жыл бұрын
You definitely influenced my buying choices... thank you Scott, you are just awesome!
@mixtermuxter8602
8 жыл бұрын
That success rate tho...
@sang84119
8 жыл бұрын
Thanks for the great review, Scott!! I decided to have this kit after saw your reviewing :) They will give me a heat bed for free and also a metal display-mount. Can't wait to receive mine!!!
@gavinsauer1608
8 жыл бұрын
I ordered this same printer from their Amazon store after having trouble ordering it on AliExpress. It came with a 10 amp 12 volt power supply which is great. After I calibrated it with the m666 command it printed really good. But I had one issue, my fan was broken on arrival so I have to get a new one but other than that it's a great printer.
@victorfiori105
8 жыл бұрын
On Amazon they have the same one with a heated bed for $400. I ordered as my first printer. Great video! 👍
@chasehammock
8 жыл бұрын
you are a badass. I don't think I can get to this level.
@hippiemcfake6364
8 жыл бұрын
That's amazing. I could never do something like this myself though.
@alteredexistence4115
8 жыл бұрын
very cool...im hoping to get myself into the 3d printing world someday soon, so i really enjoy these types of videos and appreciate the helpful info. thanks, and keep up the good work!!
@teufeltrashmachine
8 жыл бұрын
Nice printer, but for printing ABS you will need a higher temperature around 80-100 degrees Celsius for the bed. I prefer ABS, because you can easily smooth the layers and fix gaps of your print with aceton or an abs/aceton solution.
@Deemp548
8 жыл бұрын
I have purchased this printer following to your video and its really awesome , thx
@greatscottlab
8 жыл бұрын
You're welcome
@devonnuri
8 жыл бұрын
I love your english announciation!!!! And auto youtube cc works very well!!
@WolfieHatesYou
8 жыл бұрын
A shoeprint? WTF? XD
@cavosavosk
8 жыл бұрын
Now you can print own logo " GREAT SCOTT ! " 😀
@pojntfxclassics3132
8 жыл бұрын
A nicely calibrated Prusa i3 Rework with a bowden E3D-hotend and a 0.2 nozzle works very well nowadays ...
@karltonrod3855
7 жыл бұрын
Other delta printers offer more build space per $, like Biqu or Anycubic. But the special metal parts here make sense and look like a real improvement. The printer is now offered for 340$ including heatbed and auto-level. Only putting the extruder motor on top does not look like the best technical solution to me, because it means the bowden tube is longer, thus extrusion and retraction are less precise.
@duchateauproductions
8 жыл бұрын
Haha. I've probably never been so early before. I'm always looking forward to new vids. Keep up the good work!!
@subsynchronous
8 жыл бұрын
Cool and now I have many questions.
@antoniobarroso9224
8 жыл бұрын
I'v recently heard your interiew. Very good . Congrats
@gingertom64
8 жыл бұрын
thank you for the video. I am in looking to buy my first printer, and you have made my mind up which to get.
@NukTap
8 жыл бұрын
right off the bat, I love your intro!
@greatscottlab
8 жыл бұрын
+Jack Newton Thanks
@chbrules
8 жыл бұрын
I had a Rostock V2 delta printer. They're faster and can print far larger volumes than Cartesian for the price. Only big issue is that they require more calibration. You will still get belt slack over time, but I guess that's just the nature of the beast with these printers. Looks like a pretty good deal overall for that price. The heated print bed will be a must. It doesn't look like it works all that elegantly modding this setup to use it. I know the Rostock V2 felt like a professional package, but at a $1000 pricetag, you get what you pay for, I suppose.
@nikzuLP
8 жыл бұрын
LOL! I just wanted to order a RapRap because of yout Video but maybe i'll buy this now!
@spaken2768
2 жыл бұрын
lmao the shoeprint on the metal plate :p I probably would have checked if it was still completely flat tho
@Side85Winder
6 жыл бұрын
3d Printers have come a long way and my Anet A8 3D Printer Prusa i3 has no problems at all i get every print a success long as what i am printing is realistic and not impossible with a good bed level. Quality has improved so much in this clones although i think the ramps board might be a better option as i am currently trying to figure out how to modify this board to print ~300* polycarbonate
@DrCryogenic
8 жыл бұрын
that's a nice kit!! your videos always inspire me!!
@justinoertly2147
8 жыл бұрын
Alright I found the 3d printer I am getting. Great video!
@saheenpalayi
8 жыл бұрын
I like your Chanel And your innovative voice
@sebastiancojuharii5958
8 жыл бұрын
Cool stuff Scott! Can you make a video where you show us how to connect toogles to the computer ?
@ArdaAslan3172
8 жыл бұрын
You should use the cura 3d printing software! Nice video!
@karandex
8 жыл бұрын
Use brim option to prevent warping.
@jamesandonian7829
7 жыл бұрын
I did like the old big 1000mm wide bed
@Panoreth3DPrinting
8 жыл бұрын
This is so cool. I really would love to get a delta printer and review it on my channel.
@kylefikani9243
8 жыл бұрын
Finally the 3D printer
@Deemp548
8 жыл бұрын
i can give you an update on the installation instructions , I got this kit few days ago , and there are extra pdf files about the fan wiring and heated bed and even laser cutting module(Pdf , not the module it self ..)
@mnbakken93
7 жыл бұрын
hey scott can you make a full video of how to add a heated bed to the delta 3d printer +adding a new power supply?
@Darkbart22
8 жыл бұрын
This looks like it could be my first 3d printer. :D
@hypt0ny
8 жыл бұрын
Love your videos Greatscott!
@simonnaughton2272
7 жыл бұрын
"..... that looks like a death trap!" Damn funny.
@main_py5853
8 жыл бұрын
I am a fan of you please can you do a video about battery capacity
@19861986Luke
8 жыл бұрын
Great video. Now some modification and you should be able to use it as a CNC mill with your dremel tool. 2 in 1 = best :)
@MikeAndLaurenTV
8 жыл бұрын
$400 dollars is pretty reasonable for what looks like a decent machine...hmmm...
@timmeke_8213
4 жыл бұрын
3d printing has come far by now
@homamsaleh9556
8 жыл бұрын
you are the best . keep it up
@Atristiel
8 жыл бұрын
A 50% success rate is considered good in 3D printers? Damn! I'm currently designing a 3D printer, most parts on the way and I'd be very concerned if that would be the success rate of my machine. Obviously at the very start I can only dream of even that level of performance but it's always something to work towards.
@zerolabs
8 жыл бұрын
Excellent video. Thank you for sharing.
@Ahmed.Al-Hloul97
8 жыл бұрын
I suggest a versus video between the two 3d printers
@greatscottlab
8 жыл бұрын
+ahmed alhloul Well, I tried to mix the versus aspect in this video.
@rajeshripancholi1067
7 жыл бұрын
You r my biggest subscriber
@Krivulda
8 жыл бұрын
Well, it is very piece to piece, at school I work with three Prusa i3 made in April 2014 (first with milled aluminium chassis), and I got request for about 5000 prints, I got 3500 and so far only 122 were bad, from which 71 got damaged by me while I was removing them from the printbed, so...
@MarcelRobitaille
8 жыл бұрын
I think I found my summer project.
@MarcelRobitaille
8 жыл бұрын
Yes but it's hard to use while never going outside...
@MarcelRobitaille
8 жыл бұрын
I was just joking. I go biking all the time. Where I live, there aren't a lot of paved roads so a bike is more practical.
@aspmos
5 жыл бұрын
I think it would be better if could print in a different color for your test prints in order for us to understand and visualize the print quality.
@MrMcMex1
8 жыл бұрын
Please more information and videos about the printer
@lukem121
8 жыл бұрын
More videos on this please!
@box420
8 жыл бұрын
Huh this looks really interesting
@MikeGamesReview
8 жыл бұрын
Awesome Scott :)
@pedromateus4268
8 жыл бұрын
great video! I would buy it if I had the money
@RMPZ
8 жыл бұрын
Könntest du mal ein DIY Video zum Thema RFID Reader machen, möglicherweise mit Arduino, mich interressiert das Thema sehr, nur irgendwie sind die Sachen die man im Internet findet sehr kompliziert.
@Ammothief41
8 жыл бұрын
The shoe print!! Aha! Was it made on a friday afternoon?
@cocoloco55555
6 жыл бұрын
Exelent review! i bougth une of this printers thanks to your video! im a really noob in this electronic stuff but im exited to print with this metal mede 3d printer! looks really powerfull! hop i can assamble soon! Thanks!
@dolkslab
8 жыл бұрын
Yes that plug adapter is a deathtrap. You can literally stick out two live prongs when plugged in.
@Vansinn
8 жыл бұрын
The shoe print killed me xDDD
@AdhipBhargava
8 жыл бұрын
you should make effects by the help of carbon slider
@jrf0828
8 жыл бұрын
You could also buy Monoprice's fully assembled one for $350 us, free shipping
@EZCyclone
8 жыл бұрын
+Techommentary Got a link?
@jrf0828
8 жыл бұрын
www.monoprice.com/product?p_id=13860
@EZCyclone
8 жыл бұрын
Yeah, not a Delta, bummer. I was pretty impressed with the quality of the parts off this one. Am I missing something? They look pretty dang good.
@petermuller5031
8 жыл бұрын
Can you make a video about efficient ways to Step-Down or Step-Up Voltages? And another Question: Why did you choose that printer? I want to buy my own Printer but there are so many on Aliexpress and I don't know which one is the best for me. Can you recommend a site where you can see the different Printers from Aliexpress in Comparison and a site where you can find the basics of Printing? How did you find the right printer for you? Thanks for your answer and have a nice day! Greetings from Germany
@MrPcatt
8 жыл бұрын
RAMPS, der Mega und die Stepper-Driver brauchen auf jeden Fall nen Lüfter! Ansonsten ist ein Delta Printer auf dauer der gleiche Bastelkram wie jedes andere Kit auch :) Nur das die Kalibrierung der Horror sein kann. Wo ist denn der Lüfter vom Hotend? Kann mir gar nicht vorstellen das das ohne funktioniert...
@jarenhudson9794
6 жыл бұрын
While on the topic of DIY... It would be cool to DIY a pick and place machine. Any thoughts of where to start?
@Vido89
7 жыл бұрын
Did you tried printing some flexible filament on your delta ? Thank you for sharing great info I will definitely bye the same model ?
@U238lab
8 жыл бұрын
I'm going to buy this printer as my first 3D printer. I want to buy this one so that when my 101hero ships i can print any parts it might need if something breaks.
@TheSHAWSHANK447
8 жыл бұрын
I bought the same printer and have made a few successful prints, could you post where you got your heated bed and the hardware that goes with it?
@MrElowenhamn
8 жыл бұрын
+GreatScott! Can you make some more videos of the printer? i dont really know alot about coding so id like to see like to how to set up the software and the programs needed. Good work keep it up!
@greatscottlab
8 жыл бұрын
+elowenhamn Svenska I want to make this "3D Printing Beginners Guide" into a video series. So a software, filament,.... tutorial will follow.
@MrElowenhamn
8 жыл бұрын
+GreatScott! Love to see it on youre channel!
@Ucceah
7 жыл бұрын
captain hindsight sais: you should have gotten a 220V heater and a solid state relay instead.
@Twardowsky29
8 жыл бұрын
Hello, can you make video about wireless control of brushed motor , please
@junuhunuproductions
5 жыл бұрын
Meh, bought it 2 years ago(2017, January), had a lot of problem with M666-calibration / Bed-Scraping Calibration Disaster(Auto-level feature added to 2017 model) / Extruder Tube blocking the print because it didn't go fully inside the hot-end, a LOT of rattling sound(I now figure that vibration dampener on stepper motors might help), stock-endStop had it's metal part Bend(which caused in-accurate M666 calibration Result... Later changed to optical sensor because of this problem), Bowden tube seems to be low-quality(a lot of slack / stringing problem, despite various retraction speed / length settings), Dangerous Power supply Live-AC wire terminal pretty close to where you can get your fingers on.. But overall, it didn't suck THAT much, it just sucked. If I take a look at it now, I might be able to make it work again.
@jonnyroy
8 жыл бұрын
What do you mean by saying that this printers has a success rate of one of two prints?
@greatscottlab
8 жыл бұрын
+jonnyroy Most problems occur at the start of the print. Sometimes the filament just refuses to stay where it is supposed to. That requires another try which mostly works. That is why 1 of 2 print "attempts" work out fine. Once this critical phase is over it usually prints without problems.
@jonnyroy
8 жыл бұрын
+GreatScott! Is this success rate before or after heated bed upgrade?
@Gasol1n
8 жыл бұрын
Do you had any problems with the stability of the towers? I am trying to Build a delta printer myself and went also with Rods as the main Towers. But you have additionally to this two big pillars in your Printer. Is it enough to make the Prinmter stable or do you have to go down with the Speed?
@greatscottlab
8 жыл бұрын
+Gasolin1 Stability is not a problem I faced with this kit.
@SupremeRuleroftheWorld
8 жыл бұрын
+GreatScott! exept from slight warping; what problems did you face?
@greatscottlab
8 жыл бұрын
flippynl Out of the box nothing else. It all worked how it was supposed to.
@moheya1720
7 жыл бұрын
i really wish to be like you.. idol
@BSJuliaMagna
8 жыл бұрын
wow that thing looks awesome but is 1 out of 2 success rate considered good? 50% Ausschuss sounds pretty bad to me. Could you elaborate?
@EricGonzalez-bn1tr
7 жыл бұрын
I just bought it, thank you Scott. What is the type of filament for the printer?
@robbyb.6837
8 жыл бұрын
Nice job!
@AfnLP
8 жыл бұрын
Where do you get the heating bed? Can you give a link for it?
Пікірлер: 478