Thank you for the nice word, we're glad that you enjoy using our product. It is good to see actual use cases of our products!
@MakingforMotorsport
2 жыл бұрын
No problem, it’s a great filament 👍 If you want anything else testing just let me know! The Luvoc 3F PAHF CF looks lovely! 😍😂 🙏
@davidandrews4330
2 жыл бұрын
I 3d printed a 90 degree elbow that directs air from my cold air intake towards my pod filter, printed in PTEG and been in a year so far, survived a couple of track days with no signs of heat damage
@MakingforMotorsport
2 жыл бұрын
Nice! I’ve never got on well with PETG, maybe time for another go!
@JTLowry
2 жыл бұрын
@@MakingforMotorsport it has some nice spring to it. but can be a pain.
@sunshinemybrain9042
6 ай бұрын
thank you for saying this
@willbennett7508
2 жыл бұрын
Something I’m going to give a go is 3D printed moulds and then make some carbon fibre parts with carbon fibre cloth and the resin
@Thee_Snow_Wolf
2 жыл бұрын
Easy Composites has some tutorials on their KZitem channel if you haven't seen them.
@willbennett7508
2 жыл бұрын
@@Thee_Snow_Wolf yeah thats where I got the idea
@maximesauve112
2 жыл бұрын
I've done it at school a few times and tbh it's alot of fun and very easy. The only issue I had was to get the proper dimensions of the mold with the 3d printer (trial and error)
@Iamwolf134
2 жыл бұрын
That, or a 3D printed bone on which a carbon fiber skin can be wrapped around.
@willbennett7508
2 жыл бұрын
@@Iamwolf134 yeah essentially
@bentracy7463
Жыл бұрын
Great content, thanks for making the video! I've had my turbo'd first gen rx7 running a 3D printed "injector manifold" for close to a year now with nary an issue. It was definitely a huge step up from the prior blow-thru carb setup I had. One suggestion I would really emphasize is the use of proper compression limiters for any through-bolts. Regardless of whether the material is solid beneath it or not, the material will creep and eventually lead to a loose joint - nylons are especially prone to this. It's not the bolt that's coming loose, rather it's the material underneath it slowly moving and relieving the compression force. Heat-set compression limiters are a great option for this as well as the split collar style. Alternatively you can also cut some pipe that's the right size down to what you need. As far as materials go, I printed the injector manifold from NylonX and it's been doing great, although I'd be a little hesitant to print a full manifold from it. I've also got a lot of polycarbonate parts under the hood such as coil brackets and various other bits and bobs. ASA for engine top components makes me a little iffy, but as long as it's not touching the engine I suppose it's fine. With operating temps in the 80-90C range (or sometimes higher) that's getting a little close for comfort in my opinion. Fiber filled ASA, glass or otherwise, would probably be a great option however. Recently I've acquired a few other materials for an upcoming full manifold that I've been working on (same vehicle). eSUN ePAHT-CF and Essentium PPS-CF are the two materials I'm testing, although I have reservations about each. The PA doesn't have as good temperature resistance and is flammable, however the PPS is extremely rigid and not particularly tough with comparatively worse layer adhesion. I'd love to try some 3DXtech PPA-CF but unfortunately I can't hit the 90C recommended chamber temps (it has temperature resistance on par with PPS-CF; 220C continuous). The main concern about temps is that it's a turbo rotary engine, so the intake is mere inches from the turbo and exhaust. On an NA setup I'd be confident that even the ePAHT-CF would do fine. Anywho, thanks again for the video. Keep up the great content!
@jestahead
2 жыл бұрын
This video inspired me to start using 3D prints on my Rover SD1 project. It's like you say - once you've got the equipment, the know-how, and the confidence, every problem on earth starts to look like it's best solved with a 3D print. Especially stuff like interior trim, clips, and switch holders that are only available used and all very brittle by now.
@toliver.99
2 жыл бұрын
Amazing video! I'm a recent mechanical engineering graduate, but fairly new to the world of 3D printing and this video has been incredible at showing me the amazing possibilities out there and a feel for how to do things! Thank you! :D
@MakingforMotorsport
Жыл бұрын
Mech Eng!!! The true faith!!! May your future be free of Matrix calculations… 😂 I had the same awakening a couple of years ago and basically was the jumping off point for the channel. Glad you enjoyed it!
@_Keir
2 жыл бұрын
I absolutly love this, so far I've only 3d printed brackets for sensors and hoses and etc. Im going to give that ASA filament a shot, because Ive been using abs.
@MakingforMotorsport
2 жыл бұрын
Give it a go, you’ll enjoy it! Thanks for watching!
@nepicness
2 жыл бұрын
Abs isn’t easy to print with for automotive I’ve found. I’ve got 3dxtech i think and their ASA stuff and it’s super strong so far in my prints for my car I don’t need intake strong, but strong enough to hold up the MAF and hold the ECU
@benyarlett7878
2 жыл бұрын
Minding my own business and looking for something to play mindlessly in the background, up you pop and now I've got to stop working for 17 minutes, thanks! In the background my ender is humming away printing the first non WAD (Wood Aided Design) alternator relocation bracket for the 2.0 Duratec going into my hillclimb Micra....I've said it before, it's all your fault!
@MakingforMotorsport
2 жыл бұрын
😂… it’s always a nightmare watching other people on KZitem and not getting on with your own projects! You have my permission to turn off for a week and get the Micra done 👍 (B.t.w. Next video in a week…😂)
@benyarlett7878
2 жыл бұрын
@@MakingforMotorsport Careful, I'm used to BOM and TOT video schedules, more than 1 a month is absolutely heresy.
@MakingforMotorsport
2 жыл бұрын
@@benyarlett7878 aww man, I keep checking in both of them to see if I missed a vid… 😫
@TheIamgibbo
2 жыл бұрын
Duratec in a Micra? Sounds relevant given I have a Micra sitting in the driveway. What model Micra?
@benyarlett7878
2 жыл бұрын
@@TheIamgibbo it's a k11 micra, 2001. There's raw pics on the k11 owners group on Fb.
@blaze6210
2 жыл бұрын
You were an inspiration for my project, I did the same thing as you. I made an adapter manifold to use 1000rr throttle bodies on my honda civic, made it with carbon fiber filled nylon and have had great results so far. Testing different stacks had been my favorite part so far and I'm looking forward to finding out how it holds up in the summer heat next season
@MakingforMotorsport
2 жыл бұрын
Nice work! Sounds like we’re on the same track… great to hear it’s working well for you!
@Arielxx01
Жыл бұрын
Hi blaze, how is your part holding?
@blaze6210
Жыл бұрын
@Alex Grześkowiak i had no issues. but unfortunately the motor i had used it on spun a rod bearing and bent some valves, because of that i cant provide long term data, however i have made a manifold for a different car which will be tested once we convert it to standalone ecu. If you have a honda with a b16 head or b18 type r head im more than willing to share the files with you :)
@lexcrob1
Жыл бұрын
Thanks for sharing! Im so late to this party but im here for it!
@lexcrob1
Жыл бұрын
I will say the microswiss NG upgrade to my ender 3 is astounding so far.
@MakingforMotorsport
Жыл бұрын
Welcome along!!
@christiancudney9825
2 жыл бұрын
I am a huge fan (like a sickening amount) of the Mini. Dream car since I was a kid. So this is so much happiness in one channel for me. I enjoy 3D printing and this has been a huge eye opener for me. I am building a Subaru Sambar at the moment and as with all Kei trucks, parts are hard to get in the US let alone the cheap little brackets and such. I'm still learning blender. I'm an audiovisual engineer by trade and work in CAD all day. Blender is far different and I'm struggling. I'm thankful for this channel and your willingness to share.
@MakingforMotorsport
2 жыл бұрын
Glad you enjoyed it Christian! This is my first Mini and I am traditionally a BMW guy but I love, nothing quite like it! I use Fusion360 not Blender, it’ll probably work better with you existing CAD experience 👍
@bluegizmo1983
Жыл бұрын
I've got a 3d printed part under the hood. I designed a manually controlled and lockable Idle Air Control Valve for a import tuner car of mine and printed it out of PETG. It's held up great for a while now. The reason for making a manually controlled and lockable IAC was because this car doesn't have aftermarket camshafts available and I wanted it to have a slightly erratic idle like a camshaft could give it, and I noticed when the IAC was in a particular position it would have that erratic idle sound, so I made an IAC that I could be manually set to that exact position and then locked down so it can't move. It worked exactly as I'd hoped and now the car has that erratic idle sound like it's cammed!
@bbdetailing9123
8 ай бұрын
That's creative!
@nikespeedempire
6 ай бұрын
The ender 3 series is still one of the best. With so much aftermarket support these machines have extremely high performance potential at a relatively low initial cost.
@ericmalarkey1938
2 жыл бұрын
Absolute pinnacle of a channel. This content is worthy.
@MakingforMotorsport
2 жыл бұрын
Cheers bud, glad you’re enjoying it! 👍
@BrianBoniMakes
2 жыл бұрын
I like your test. 6 months in fuel is tough. These are good videos, I came for the Speeduino but I like all the super effective low cost tips.
@v1ncen715
7 ай бұрын
I have used Winkle ASA and was very happy with it. I am now testing PCTG.. Printing mounts and accessories for my bikes
@camofelix
2 жыл бұрын
Always great when I see a notification that you’ve posted! All the best from Canada!
@MakingforMotorsport
2 жыл бұрын
Cheers bud, got loads lined up and trying to hit it hard for the rest of the year… we’ll see how far we get!
@rossmarzano
2 жыл бұрын
I have been using PLA to make prototype brake brackets. I find that making prototypes is quicker, easier and cheaper than machining aluminium multiple times. I have fitted 4 pot calipers to the rear of an abarth 500, 8 pot calipers to the front of a ford falcon and toyota camry, 6 pot calipers to the front of a ford falcon. I will be having a bash at an inlet manifold for a ford cleveland v8 in the coming months. Loving this channel, cheers!
@MakingforMotorsport
2 жыл бұрын
Nice! Sounds like you’ve been busy! 👍
@shawnodell4382
2 жыл бұрын
Found that if I spiral wrap some sandpaper around a die grinder shaft or dremel tool, I can smooth the inside of the velocity stacks nicely. It worked well with taulman 910 but I have never used the CF nylon.
@talljake
2 жыл бұрын
Thanks for putting this video together, so much useful information. I've been thinking about making a CF Nylon intake for ages, but was worried about it's resistance to fuel, definitely cleared that one up! 🏁
@MakingforMotorsport
2 жыл бұрын
It’s hardly a scientific test but proves the point 😂👍
@tonychiarappa8237
2 жыл бұрын
I love what you're doing. Keep it up!
@MakingforMotorsport
2 жыл бұрын
Thanks, will do!
@TheEtbetween
Жыл бұрын
Nylon X ! That’s all I use! Super Strong
@DylanHarte
Жыл бұрын
I appreciate this video is older now, but pretty much bought my first 3D printer on the back of it. Sovol SV06 plus. Already been very successful with some basic bits I needed for my car. Thank you for taking the time to make great videos, your channel is very under rated.
@koosintea9698
2 жыл бұрын
Good to know the filament is fuel proof, thanks. 👍
@MakersMuse
2 жыл бұрын
Is there a filter in the velocity stacks? I've always wondered if they might crack and get sucked in but seems to be holding up nicely! Really neat.
@MakingforMotorsport
2 жыл бұрын
Hi Angus, thanks stopping by! There aren’t any secondary filters, something I’d not thought about as the stacks are quite sturdy and never show any signs of degradation etc. I think it’d take a “mechanical action” (e.g. a crash 😬) for these to smash to the point of being ingested, in which case, I have bigger problems! 😂
@KarriKoivusalo
2 жыл бұрын
Very inspirational! I am planning on doing a custom sized MAF barrel using PP-GF. I was originally going for CF Nylon but found out glass fiber added polypropylene would suit perfectly fo the purpose, it has sufficient ambient temperature limit (180C, far more than enough), it stores easily (hydrophobic), has good impact strength and phenomenal layer adhesion. This video cleared out some apprehension I had about making intake parts with 3d printing (I already did a flex fuel sensor but it doesn't involve bits easily ingested by the engine...)
@MakingforMotorsport
2 жыл бұрын
PP? I heard it was a pig to print with big warping?
@heinzhaupthaar5590
2 жыл бұрын
@@MakingforMotorsport The fibers help a lot with it. Just like with Nylon, the plain variant likes to warp a whole lot more. Gf filled instead of Cf filled is a good allround choice, worth it just for the printing properties alone with certain materials. If the maximum rigidity of carbon fibers isn't needed - save a few bucks and just go Gf.
@scruffy3121
2 жыл бұрын
I've had great experiences with eSun ABS, ASA and nylon.
@MakingforMotorsport
2 жыл бұрын
Thanks buddy, I might try eSun next time through...
@phillipthomas4489
Жыл бұрын
If anything has been under the hood for 2 years, would love an update. This is in consideration with making products with practical lifespans in daily-driven stuff, 5 years would be ideal as a bare minimum.
@tazanteflight8670
2 жыл бұрын
I think your theme of "3d printing car parts" has huge potential. Good luck with the channel.
@MakingforMotorsport
2 жыл бұрын
I hope you are right! Thanks for watching! 👍
@jonwebb9261
2 жыл бұрын
I guess the fortunate thing about it being an inlet is that it actively cools itself in use! Great video as always.
@MakingforMotorsport
2 жыл бұрын
Cheers bud... I did think that but heat soak can be a bitch!
@jonwebb9261
2 жыл бұрын
@@MakingforMotorsport yeah that's for sure. You could use infill to mitigate heat soak too, where you can get away with parts being less than 100% dense that is.
@johnj2496
Жыл бұрын
Or a thin phenolic heat blocker "gasket"
@dannychiguina3962
Жыл бұрын
Awesome tips thank you
@imagearchy4782
Жыл бұрын
Great vid! I am printing an intake to run a honda j35 in my 73 911.
@MakingforMotorsport
Жыл бұрын
Nice!!! I should at this point shout… “a 70s 911 with a modern V6???, heresy!!!” But it sounds like fun!
@kepamurray1845
2 жыл бұрын
Thanks for the follow up. I'm not surprised about the fuel resistance of the nylon. We use epoxy polayamide (nylon) primer inside the fuel tanks of aircraft.
@MakingforMotorsport
2 жыл бұрын
I wasn’t surprised but it’s always nice to check and it’s a pretty powerful way to show the internet! 👍 I like the sound of playing with aircraft by the way!
@kepamurray1845
2 жыл бұрын
@@MakingforMotorsport I hear that a lot. Reality is not quiet so glamorous. 12 years of big jets and 16 years of helicopters sounds good on the outside. What I see is 25+ years grinding corrosion and dealing with toxic chemicals. You're spot on about the demonstration for the internet. I'm pleased to see your strap over the coolant passage worked. Might be an idea to tap the head and use a 1/2" bsp plug. You have me very interested, though the Aussie +40°C summer days might be interesting, I will get back to you. 🤘
@porcat2014
2 жыл бұрын
Another great video. I've done an ABS intake "Dave Mod" for the Cooper S that has worked fine for 6 Cali summer months of torture and been working up to nylonX for the zetec throttle body trumpets and manifold. My intake trumpet and manifold are coming along nicely. My printer is cheap but with very similar upgrades to yours. (Tronxy5SA) but a couple of mods really matter: Insulated bed with glass wool, Glass bed plate with glue stick, fabric creality enclosure, 90 degree brackets on every corner to make it ~10X more rigid, z axis sync belt, Dry teflon powder z-axis lubrication, metal extruder, cheap ebay volcano-like all metal hot end, capricorn tube, upgraded harder nozzle, heatsinks on all the extruder motor and axis stepper motors for staying cool while doing long prints in the enclosure. An insulated sterilite box with re-usable dessicant bags for keeping the filament dehydrated. The Result is large print volume and reasonable prints even in ABS for a budget friendly price. Keep it up and we'll either be seeing some lost PLA home forged parts soon.
@MakingforMotorsport
2 жыл бұрын
Wow! Upgrade dreams 😍. The dual z-axis with a sync belt seems to be a killer mod. You mention a volcano like hot end, I was gonna go for that but the sheer quantity of melt zone and potential for stringing scared me so I thought, let’s just print slower 🤔😂
@alessandromeyer4888
2 жыл бұрын
I never quite understand why you would invest so much in an inherently compromised design when there are much nicer diy printers like the voron family e.g.
@AutomotiveConcepts
8 ай бұрын
Man, I love this video. The information is absolutely amazing, I’ve subscribed and just going to look at all your other videos. Thank you for inspiring us!
@stevesloan6775
2 жыл бұрын
Love too see you model up some trick 3D printed forged carbon fibre moulds.
@MakingforMotorsport
2 жыл бұрын
There is soooo much I want to get stick into on Carbon… those easy composites guys know their stuff…
@bbdetailing9123
8 ай бұрын
Thanks for this good video. Helps a ton
@henrimcgowan5589
2 жыл бұрын
3dxtech makes some really nice Asa they also have some color selection
@JBLewis
Жыл бұрын
Your info about printing ASA was really helpful. I'd read that ASA was a great choice for parts that would be subject to UV, but really hadn't found much yet about actual printing experiences.
@mikemikeyee
2 жыл бұрын
Your testing and sharing with youtube is greatly appreciated. Keep it up!!!
@MakingforMotorsport
2 жыл бұрын
Thank you 👍 plenty more coming!
@Sketchyrooster
8 ай бұрын
Great video, exactly what I was looking for.
@mvdesigncustomworks5460
2 жыл бұрын
I have about 80 printed parts on my vw Brasilia, mostly remixed trim pieces, some of them, like my led tail lights are on my channel, but i'm waiting until my speeduino conversion is done to make a video showing all of them. Hopefully on the next pair of months! For the manifold nuts, you can try to use fiberglass washers under them, rc cars from tamiya have those on their motors to stop heat from melting their plastic gearboxes.
@MakingforMotorsport
2 жыл бұрын
80 printed parts?! Nice! And I will check out those washers!
@Addimotive
11 ай бұрын
Great video! About to start diving into printing ASA parts for my C5 Corvette! I've been printing automotive parts with PETG, but I got really frustrated with it's poor printability, especially for larger parts. Excited to give ASA a shot!
@kevanamjadi2853
10 ай бұрын
Thank you for sharing this video! It was very informative!
@mjmedley1
Жыл бұрын
I printed the numbers for an old style numberplate out of asa, they look amazing and a year on still look the same!
@MakingforMotorsport
Жыл бұрын
Nice!!! That’s a handy trick to remember!
@knownchild
2 жыл бұрын
Pack your parts in cornstarch and anneal them slowly heat and slowly cool in a oven. Also you might want to try some carbon fiber polycarbonate. I find it better than the sain smart for layer adhesion.
@MakingforMotorsport
2 жыл бұрын
I have some CF-PC prusament ready to go!! 👍
@RyanKirk99
2 жыл бұрын
This is a really useful video. Thanks for sharing your experiences. Good video.
@MakingforMotorsport
2 жыл бұрын
No problem Ryan, thanks for watching!
@jimbuilds
2 жыл бұрын
So far I have made a coolant overflow bottle holder out of PETG I need to make it a little thicker as it's cracked on an area I made it a little thinner and 15% infill. I've also made some wiring covers from TPU and replacement bulkhead connectors for my loom that aren't available anymore. TPU has worked much better than I expected. Keep up the good work
@MakingforMotorsport
2 жыл бұрын
Good to hear that the TPU worked well for bulkhead grommets... I have a spool for that exact job 👍
@BusbyBiscuits
2 жыл бұрын
Blue Box Goblin sell some great ASA from a Polish company. They also do an excellent PA12CF
@tabryis
Жыл бұрын
Certified hood classic
@Stef-an
Ай бұрын
Mate I was worried printing a connector with ABS for a small hose that goes near the engine, but after seeing this video and how close to the engine and heat you've used these parts, I think I'll be fine :D Thanks a lot
@codyjepsen2031
2 жыл бұрын
3dxtech CFR ASA is really good. I have several printed parts on my 99 4runner.
@CaptainsWorkspace
2 жыл бұрын
Thanks a lot! Have been printing a lot of airfilter housing inserts, designed soem mdos to house diffrent filter types and lids on OEM housings, but never got them to last more than a few months. Will defenitly be trying ASA instead of PETG!
@MakingforMotorsport
2 жыл бұрын
ASA is wonderful stuff, I can guarantee once you run it you’ll not look back!
@EndMotive
2 жыл бұрын
I ran an ABS printed cold air intake for a while and currently have fluid reservoir caps installed in the engine bay, for over a year holding up great!
@MakingforMotorsport
2 жыл бұрын
Nice! 👍
@joeclarke1222
2 жыл бұрын
3D printed my own reversing camera and rear num plate light and twist lock for indicator bulbs on my morette headlights for my Escort. Just using abs. I tried ASA but didn't have much luck
@gafrers
2 жыл бұрын
Interesting Recap and update on the parts
@MakingforMotorsport
2 жыл бұрын
I wanted to give it all chance to fail but, still going strong!
@biggboysouth
2 жыл бұрын
Another solid tip for the slicing process is making your model out of separate components. Slicer has the ability to tailor the print settings for each individual component all in the same slicing file. So for instance the bolt holes mentioned earlier could be a separate piece that can be printed completely solid where as the rest of the model has different setting presumably for material savings. This also works for making you own more efficient print supports.
@MakingforMotorsport
2 жыл бұрын
I’ve not tried that, it sounds like a good tip! 👍
@biggboysouth
2 жыл бұрын
@@MakingforMotorsport I should clarify, cura slicer has that ability not sure which other slicers have it.
@jeffharrison5265
2 жыл бұрын
Great follow-up information, thanks.
@MakingforMotorsport
2 жыл бұрын
My pleasure!
@LoganDidItYT
Жыл бұрын
I had an E3dv6, and others. It was good, but not a huge improvement for me (at least). I then got the Hemera and it was a big leap ahead. If you’re ever in the position where you’re consider that, it was worth it (in my opinion).
@Zandermort
2 жыл бұрын
HELL YEAH MORE MODELING
@MakingforMotorsport
2 жыл бұрын
Coming a couple of days my friend! 👍
@pierrelacroixexk6713
Жыл бұрын
Amazing video, so smart, congratulations!
@jungle_jim42
2 жыл бұрын
Awesome content as always man, love the can-do and engineering process attitude. My 3d printer has been so damn enabling for enclosures of custom PCBs, wiring, etc. on my car project. You've inspired me to start after using CF filament to make my own ITB setup. I think with some cut aluminum "sandwich" plates like you did for the blockoff it could be a real winner!
@MakingforMotorsport
2 жыл бұрын
Yeah, I think sandwich plates are a winner, it’s not so bad on the Vauxhall engine as it has lots of fasteners, but I have another engine on the garage floor with only 5 for the whole manifold, what I did here wouldn’t work for that!
@56Moto
2 жыл бұрын
intresting video. I also printing parts for my supermoto track motorbike. I made some sliders and crash protection. Great channel you have.
@MakingforMotorsport
2 жыл бұрын
Do you directly print the crash protection? How does it stand up?
@56Moto
2 жыл бұрын
@@MakingforMotorsport De came oud great, I just need to crash to see how they hold up. But I hope to be able to wait as long as possible.😅
@maiksteijns8610
2 жыл бұрын
just discovered this channel. great video !
@MakingforMotorsport
2 жыл бұрын
Welcome aboard!
@daos3300
2 жыл бұрын
good stuff. the manifold braces are great but you forgot to add the dimples using your 3d printed dimple die..
@MakingforMotorsport
2 жыл бұрын
Oh man, I had ideas of cutting out triangular sections and printing matching dimple dies and bending over edges and going to town… But then the kids had to go swimming, cars needed washing, pictures hanging etc etc… so I thought “f@&k it!”
@iPeel
2 жыл бұрын
We switched from FF ApolloX to Filamentive ASA - mainly because Filamentive are UK based and deliver next day. The printing profile is identical and we've had no issues with warping or strength / impact charateristics. We also found FF filaments to be extremely dusty, needing filament filters before the extruder, FF never responded to our concerns and Filamentive seems to be much cleaner.
@mrdennisday
Жыл бұрын
I use Priline Carbon fiber polycarbonate for a lot of my prints under the hood. I may try this carbon fiber nylon sometime. My Priline filament works great as long as it is not in the valley between the two heads of my Toyota 5MGE engine. I tried printing spark plug wire guides with 100% infill and the one in the valley ended up warping badly. It does get VERY hot there.
@TravisFabel
2 жыл бұрын
3D printed parts under hood are definitely something I fancy doing. Lol
@MakingforMotorsport
2 жыл бұрын
definitely worth a go 👍
@thorley1983
2 жыл бұрын
I use petg from amazon. £14ish per kg, low shrinkage prints exactly the same as your ASA, good UV resistance and its recyclable in the bin. its the same plastic as milk bottles
@Lykoloo
2 жыл бұрын
Is it novamaker brand?
@gonzoribbons
2 жыл бұрын
I used to work for a company that made aerospace and military gaskets, the gaskets could easily be deformed to the point of damage. A common solution is to add compression stops. Calculate the percentage of compresssion required, this gives you a figure for the thickness of the compression stop. These can simply be metal tubes cut to the compressed thickness required, or washers. CNCKitchen might have some figures for compression % without damage.
@MakingforMotorsport
2 жыл бұрын
I am incorporating those into my latest build on Project Siesta 👍
@driven_nation
2 жыл бұрын
I love this! I have 3d printed fiberglass molds for parts that turned out great but have been super hesitant on fuel and heat resistance... sounds like I'm buying some carbon nylon filament.
@MakingforMotorsport
2 жыл бұрын
Go for it mate, obviously be sensible and keep an eye on the part but it’s definitely do-able!
@rangefreewords
2 жыл бұрын
I like this idea. How did you get along with the engine coolant channels?
@vthomebrewer
2 жыл бұрын
Thanks for more great info!
@alessiocarlevaro6934
2 жыл бұрын
i got a 3d printed (ASA) adapter to remove the AFM on my 1.6 miata. With the coid air intake i'm running the adapter sits right between the engine and the radiator and it still fine after one year. I didn't print it but i did design it and got it printed with one of the web services
@MakingforMotorsport
2 жыл бұрын
That will do the job nicely! 3D printing is the future!
@Robin-my2gz
Жыл бұрын
Make an sheet metal frame that goes over all bolts on the manifold to create an even clamping pressure all around. And use springs under the bolt heads.
@lukejones3069
2 жыл бұрын
Hi MfM. Just happened upon your channel, I've been dyno testing different sized ITBs on my 2276cc vw beetle. From 36mm up to 48mm... but now I'm playing with trumpets and only have 2 sizes in aluminium. So I'm going to print some. But I'm a complete noob wrt 3d printing.
@ajhartmanaero
2 жыл бұрын
Awesome video. I have several 3D printed parts on my race car but only print in PLA so far so they only hold non critical stuff in low heat, or no heat environments. Funny enough, I made a bracket almost exactly like the one you made for your fuel pump to hold my fuel filter.
@MakingforMotorsport
2 жыл бұрын
I’d imagine you’re more likely to use Carbon!? 😂. Just checked out your channel, Carbon fibre is the next technique for me to learn so loving your channel! 👍
@ajhartmanaero
2 жыл бұрын
@@MakingforMotorsport yeah definitely more familiar with carbon. Any questions feel free to ask.
@ajhartmanaero
2 жыл бұрын
Also, mess ups are much more expensive than even the most expensive filaments so just be ready for that haha
@knuddelwinzig498
2 жыл бұрын
I made an engine swap on my motorbike and use abs printed engine mounting plates for fit test before make some out of steel or aluminum. If you don't have drawings and measurements are hard to get because of space or in my case unknown final position, printing indicator plates and measure against them helps to get a perfect fit. I also printed some small brakeds, jigs and fixtures. Any experience with abs velocity stacks? I really enjoyed the 3 episodes of bringing the itb's in your mini. You are doing a great job!
@devion321
2 жыл бұрын
aqua net extra super hold works better then glue stick and goes on evenly and easer to clean off the plate
@Eric-Marsh
Жыл бұрын
I've not used ASA before. Looks like I should give it a try. I just made a new under hood fuse box cover for my Barchetta using PETG because of concerns about the temperature in the engine compartment. So far it's holding up well. Regarding the use of carbon, I've always been skeptical given that it gets it's strength from the long strands and tends to be chopped into tiny bits when in a filament. Right now I'm experimenting with using a 3d scanner for modeling. So far the results have been a bit dicey.
@fayobam_mech_tronics
2 жыл бұрын
Cool video
@MakingforMotorsport
2 жыл бұрын
Cheers bud!
@autopatina8337
2 жыл бұрын
Excellent video, thanks 👍🇬🇧
@MakingforMotorsport
2 жыл бұрын
Cheers bud 👍
@brappineau4161
2 жыл бұрын
Very very helpful. I've been looking at nylon x for my harley intake. I'm hoping it withstands 220F on a hot day in traffic.😬
@robertsulley
2 жыл бұрын
Just found your channel! Great content so far! Looking forward to taking a look at your other videos. Thanks for confirming that it is a vauxhall engine in that mini, I recognised the rocker box cover from my old Nova, but couldn't fathom what it was doing in a mini! Now off to find out how air is metered using ITBs as there's no MAP sensor, and probably not going to be 4 MAFs.
@MakingforMotorsport
2 жыл бұрын
The engine is actually from a more modern Astra (Z16se engine code) but I knew I needed the Nova era OHC rocker cover! Takes me right back to being 17 again! Good luck on the ITB hunting, I’ll give you a clue… the answer is in one of my videos 😉👍)
@Marvin-sl4fu
2 жыл бұрын
Printed a holder for a throttle-position sensor, that fit to my 45 DCOE Webers, last year. Still going strong!
@MakingforMotorsport
2 жыл бұрын
Webers... 😍😍😍 that's all there is to say!
@Marvin-sl4fu
2 жыл бұрын
@@MakingforMotorsport hell yeah, lovely bits of kit 😄
@skaltura
10 ай бұрын
fuel pump holder issue -> was not designed for 3d printing, always be mindful of layers so printable on it's side is best. The longest possible continuous extrusions of plastic.
@funkynerd_com
2 жыл бұрын
I 3D print a whole bunch of parts for JZA80 Supras. All interior parts though, but coming up with some non-stressed parts for under the bonnet now. Usually use carbon-fibre infused PET filament which can be a pain to print, but when you nail it, it's tough as hell.
@migael92
2 жыл бұрын
Could not agree more, my ender 3 has thought me alot about 3D printing and it pitfalls. Cool so see that you able to make such high end components with exotic filaments on yours!
@WarlordMarty
2 жыл бұрын
Found your channel yesterday and subbed after watching this vid :) you're doing some great work! I've got two FDM and two resin printers here, so may try making some bits for my projects 👍
@MakingforMotorsport
2 жыл бұрын
Thanks Warlord! 4 printers?? That is printing goals right there! 👌
@davidmurray199254
2 жыл бұрын
Excellent content as always. I design automotive parts and use fdm/SLA to prototype then I send it out to be printed in MJF PA12 nylon as its strong/chemical resistant and the textured aesthetics just look great.
@MakingforMotorsport
2 жыл бұрын
Oh man, those MJF prints just look 😍, I’ve never looked around for a print service in the UK but those MJFs would have me parting with some 💷💷💷
@garagecedric
2 жыл бұрын
@@MakingforMotorsport i order loads of mjf parts at work for high heat, mechanical parts, they really are great for all round usage. Small parts are surprisingly cheap, but a bit larger parts quickly end up like two Ender 3 worth of money 😂
@MakingforMotorsport
2 жыл бұрын
@@garagecedric I love that Enders are now a unit of currency…. MJF is still something I want to try, but don’t want to spend more than a Textured Glass plate 😂
@luke8874
Жыл бұрын
I just discovered this channel because of the sainsmart cf you're using. This is an awesome channel and you do some good work
@guycarnegie7411
Жыл бұрын
I'm doing this on my triumph gt6 as manifolds just aren't available that'll clear the bonnet. Hoping that the temperature is OK as the engine isn't a crossflow and exhaust manifold bolts on right beneath the inlet. Exh & Inl Flanges actually touch each other.
@Kevin15673
Жыл бұрын
Why not upgrade to a direct drive extruder? You can print a bracket for it and just move the factory extruder onto it, you just need to extend the wires. I did it on my cr-10 and it improved print quality, even with pla/petg, and made printing other materials such as tpu way easier.
@DasseemUltor
2 жыл бұрын
Great vid! I'm planning to get a 3D printer to custom design a intake duct & filter. Hope to learn lots from your vids!
@MakingforMotorsport
2 жыл бұрын
Cheers buddy! More modelling coming soon! 👍
@shabbytiger5528
Жыл бұрын
What a great solution for classic cars and their obsolete parts. Are you able to make a steering rack boot. It's obsolete for my 1973 Audi 100 coupe.
@finlay230
2 жыл бұрын
Excellent vid 👌👍
@MakingforMotorsport
2 жыл бұрын
Cheers Bud, glad you enjoyed it! Lots more coming… 👍
@Mechanickirk
9 ай бұрын
Just found this video. 3d print dimple dies and drill the plates from your rocker cover to the throttle bodies and then dimple die those plates.
@deciplesteve
2 жыл бұрын
I don't have a 3d printer, but this makes me want to learn how to use one.
@MakingforMotorsport
2 жыл бұрын
My work here is done! 😂
@deciplesteve
2 жыл бұрын
@@MakingforMotorsport pretty sure I need to talk my boss into buying one so we can make our own parts.
@aussietruckphotosandmodels8510
2 жыл бұрын
Another great video loads of information. I don't know if you've been watching Two stroke surfing or not, but he's probably a couple of steps farther along than you are at the moment. And has had to solve similar problems to you like crush distortion on flanges caused by trying to get enough clamping pressure to seal ( ( he's building a home made, home designed 2 stroke 50cc nitro supercharged engine to take back his land speed record at Bonneville )
@MakingforMotorsport
2 жыл бұрын
Oh yeah I've been watching Alex, he was playing around with 3D printing and I pointed him at my videos and he gave me a great plug about 6months ago. Comments occassionally. Lovely bloke. Quite the singing voice aswell it appears! 😂
@aussietruckphotosandmodels8510
2 жыл бұрын
@@MakingforMotorsport I'm not sure about the singing, and the hat is a bit of a worry.... some of his back ground music isn't to bad... Like you, he's worth watching.....
@markh2005
2 жыл бұрын
Good stuff, as ever!👍
@MakingforMotorsport
2 жыл бұрын
Thank you! Cheers buddy!
@markh2005
2 жыл бұрын
@@MakingforMotorsport keep em coming please !
@thijseurlings1988
2 жыл бұрын
Great video. I love 3D printing, especially for car parts. I only can recommend a Prusa instead of an Ender. I only had problems with the Ender, after buying the printing was fun again.
@MakingforMotorsport
2 жыл бұрын
I’ve heard great things about the Prusa and I am sure it is good, but honestly, I would still be saving now if a Prusa was the only option, I am glad there are more accessible options, even if I have to level the bed every so often! 😁
Пікірлер: 337