Man, so cool to be involved in something like that. Also love that movie. Also also, that sucks so much that was lost by FedEx! Also also also, nice shirt :D
@3DPrintingNerd
3 жыл бұрын
I was hoping you would like my shirt! :)
@cole1361
3 жыл бұрын
@@3DPrintingNerd when the joel is sus 😳😳😳
@punishedprops
3 жыл бұрын
Most excellent work Joel! =D
@clarewillison9379
3 жыл бұрын
In 30+ years, when someone makes a film of How it was Made: Captain Disillusion’s How it Was Made: The Flight of the Navigator, your greatness will be recognised. 👏🏼
@3DJapan
3 жыл бұрын
By then we'll have transporters and FedEx can lose things in transport a different way.
@outofdarts
3 жыл бұрын
Always love to see collabs like this. It's what I love about KZitem. - Perry
@UncleJessy
3 жыл бұрын
Oh my goodness so many fun memories from being a kid watching that. Those steps were such a wild part of that show. also that callout about Sean not seeing the movie... cold blooded haha Sean - amazing editing on this one!
@HackMonkey
3 жыл бұрын
And watch the movie, Sean!
@SauloBenigno
3 жыл бұрын
"Love with your heart, use your head for everything else"
@TheSolongsidekick
3 жыл бұрын
Yes, that is a verbatim transcript of what the captain always signs off with. Thanks? I guess if you're deaf but can't figure out subtitles you helped that one in 10 billion person? Hero.
@DiThi
3 жыл бұрын
"use your ow my head for everything else"
@travcollier
3 жыл бұрын
Yep, Capt D is great and good.
@YukonK9
3 жыл бұрын
I instantly noticed the 3D printed rig in the CD video and then saw your channel name in the credits and got excited! Glad to see the challenges and progress on your part ;)
@rebeccaplowman6367
3 жыл бұрын
Omg I have died. The collab I didn't know I wanted.
@rhysswitzer
3 жыл бұрын
Legendary collaboration. I love it.
@shenglong9818
3 жыл бұрын
Just watched his whole Flight of the Navigator and found this one. Great stuff.
@3DPrintingNerd
3 жыл бұрын
His video is a masterclass. SO GOOD.
@FranklyBuilt
3 жыл бұрын
Dudeeee this is awesome
@HackMonkey
3 жыл бұрын
Fantastic! Loved this movie as a kid, and watched it with my own kids about a month ago. So great timing on the collab! Watched the Captain's video right after Bill dropped his. Loved all the making of details. Hope you all get to work on something together again.
@MatthewWathen
3 жыл бұрын
I've seen a print floating around (pun intended) where someone printed the ship with magnets and it's floating above a base. You should print something like that for the show!
@ammusionist
2 жыл бұрын
Hey Joel - Fun facts about Blender and 3D Printing. STL format only specifies numbers - not units. Most slicers for 3D printing will interpret "1" as 1mm because that's an appropriate scale. Here's where the fun starts. Blender units are 1 = 1 meter. (It uses these for physics simulations, so even though some will say it's unit agnostic, it's not really) If you are building something say, 10cm high and to scale, Blender will export this in STL as 0.1. Problem is your slicer will see this as 0.1mm (REALLY REALLY TINY!) What I normally do when I export Blender models to STL is scale up by 1000 in the exporter settings. Usually fixes the problem.
@lordquinn1605
3 жыл бұрын
I loved "Flight of the Navigator" and when I took the Disney Back stage tour I got to see the full sized ship used in the movie.
@andygoralczyk22
3 жыл бұрын
Hi! I loved the collaboration, excellent work! I use Blender to export to Prusaslicer regularly. The trick is to use a unit scale of 0.001 (and metric unit system) in Blender to get the correct dimensions to the printer.
@makedaevilmage
2 жыл бұрын
Man I love that movie. Saw it on TV some years ago and totally fell in love with it. The entire movie is such a nostalgia trip (I was born in the 80s).
@jimmysgameclips
3 жыл бұрын
I use Blender for CAD because I'm a heretic and the model being like that seems about right as you need to scale up the STL 1000x on export but if you didn't use 3D slicers you might not know that
@baggelissonic
3 жыл бұрын
I can't believe FedEx literally lost a piece of art history :)
@leesmithsworkshop
3 жыл бұрын
Flight of the navigator and Explorers are two very special movies for me, I would watch them every time it was shown on the TV.
@Benjamin_Reese
3 жыл бұрын
DUUUUUUUUDE!! I love both your channels! I'm so happy to see you both together!!!
@MandicReally
3 жыл бұрын
Cool to see you got to help out with that project. I thought I’d end up watching that video in pieces as I had time, then I watched the whole thing. Always loved that movie. 👍🏻👍🏻
@AmusementLabs
3 жыл бұрын
And that's why I use ups...
@Zachary3DPrints
3 жыл бұрын
I never saw that movie, but very awesome that you could help out on something like this!
@my3dprintedlife
3 жыл бұрын
Two of my favorite KZitem creators!
@Skyentific
3 жыл бұрын
Cool movie! Great collaboration!
@nanastos18060
3 жыл бұрын
Holy heck totally forgot about that movie till now! Also one of my favs from back in the day!! Keep up the great work guys!!!!
@LincolnWorld
3 жыл бұрын
Joel, great job! Sean, you really out did yourself on the look of this video too, great job! Fed Ex,... NOT A GREAT JOB! That is the kind of worthless service I would expect from UPS, not fedex. It is amazing how many times UPS has claimed a package was delivered when it was not actually delivered. Sometimes it shows up 2 - 3 days later, and some times not at all.
@GarryOzols
3 жыл бұрын
OMG, you are wearing a Bobby Duke shirt, I am now so freaking happy, two of my favourite creators on one screen.
@grimsdagger
3 жыл бұрын
That intro was sick!
@LeRainbow
3 жыл бұрын
Captain Disillusion!!!!!! The VFX God, Guru and everything inbetween. And he‘s co making with 3dPrinting nerd?! Awesome!!
@vinnnocc
3 жыл бұрын
my two favorite youtube guys working together that’s awesome
@yogician
3 жыл бұрын
My two favorite KZitem channels all in one video how cool is that!!
@atc9000
3 жыл бұрын
It was the First film I ever saw at the cinema by myself
@psguardian
3 жыл бұрын
CAREFUL!!! You're holding my ChildHood in your hands!!!!!!
@psguardian
3 жыл бұрын
FedEx?!@%#$@&^........ Bad fedex.
@toyotaboyhatman
3 жыл бұрын
funny watching captain disillusion first, and then realizing you had something to do with the stop motion
@3DJapan
3 жыл бұрын
Can't believe that was stop motion. I never knew! Always thought it was early CG. But now that I think about it, you couldn't really do that in CG until years later.
@kirknelson156
3 жыл бұрын
I always find it very cool when I learn that some of my favorite youtubers not only know each other but collaborate on some awesome projects.
@nahueljo
3 жыл бұрын
No way! Just came from watching that video! Didn't imagine there was a collab happening here lol
@risbill1
3 жыл бұрын
A FedEx employee now has a piece of movie memorabilia and a nice stand to display it.
@ed_halley
3 жыл бұрын
So the most likely errors in Blender-to-STL scaling are inch-mm factors (1:25.4) or m-mm factors (1:1000). STL files assume 1 unit is 1 mm typically.
@eugenew2
3 жыл бұрын
Exporting stl files from blender to need to be scaled 1000x without regard of scale being 1. The easiest method(I use only metric): Actively select only the objects wanting to export. File-export-stl. In the export/save window, check "only selected" and 1000 scale before saving. Then importing file into Prusa Slicer should work without issues.
@Nathan69
3 жыл бұрын
Wow a calab I never thought I'd see awesome
@TheMidnightSmith
3 жыл бұрын
I have no idea who captain disillusion is, how he's got millions of views, or what this movie was. However, neat how you showed that printing is about iterations and that's the true Power of the tech!
@3dprintingscience528
3 жыл бұрын
Amazing, im a big fan of CD and Joel and now I have a video with both! :D
@edwinirizarry9277
3 жыл бұрын
Dude I literally came across captains video on that iconic piece of my childhood as well flight of the navigator and then lo and behold I woke up today to my all time fav 3D printer man had a hand in that awesome video !! What a seriously cool happening. And Shawn I can’t believe you haven’t seen that video !!!??? You rly need to watch it!
@That3DPrintGuy
3 жыл бұрын
You had the Screen used parts OMFG!!!!!!!!!!!!!!!!!! That is the best!!!! ........................FED-EX Should burn in a special circle of hell for losing that box.....
@stldenise
3 жыл бұрын
So THAT was the missing box. That's annoying! I might have to go dig up Flight of the Navigator and see if it holds up.
@seedmoreuser
3 жыл бұрын
Next, Joel uses the large Disney printer to reprint a life sized replica of the ship.
@vondaed
3 жыл бұрын
i have so many issues with fedex and never personally use them. whenever stuff is shipped to me using them i always worry if ill actually get my stuff
@djdxb
3 жыл бұрын
HOW CAN ANYONE DISLIKE THIS
@SLcompany_watch
3 жыл бұрын
Awesome collab!!!
@yogician
3 жыл бұрын
Love this!
@radicalxedward8047
3 жыл бұрын
Wow! Captain Disillusion! I thought he quit KZitem cause I haven’t seen a notification in ages. But I just checked and he had a new video up like a day ago. Damn KZitem.
@3DMusketeers
3 жыл бұрын
Great video Joel! Love these Collabs! Loved Flight of the Navigator as well! Amazing editing! Quality content! Also, go figure.. freaking fedex....
@CallousCoder
3 жыл бұрын
I thought the captain did that himself :) the cheeky bugger is outsourcing ;) awesome job! You helped with bringing one of my favorite movies BTS :)
@OurHeroXero
3 жыл бұрын
As George Costanza once exclaimed...My worlds are COLLIDING!!! And I am very happy about it
@DanFrederiksen
3 жыл бұрын
Huge effort. When I saw you had the piece I immediately thought it was risky to ship that and then it was lost.. On a plot twist note however, you may have noticed chatter about UFOs recently from official sources including Obama essentially verifying ET ships fly in our atmosphere the other day. Flight of the navigator was a cute movie and not entirely wrong but we could actually be on the verge of the real deal. And the ETs use a form of 3D printing to make their ships. They have no seams or rivets. All monolithic including the 'wiring' and 'circuitry' and propulsion.
@DanFrederiksen
3 жыл бұрын
I mean really real. I know for certain that it is real but what we might get is acknowledgement and open contact. For realz. And in case it wasn't obvious, that's huge in the extreme
@BRUXXUS
3 жыл бұрын
I LOVE the movie, and I LOVE the Captain's video on it!
@BrianSantero
3 жыл бұрын
I hope whoever wound up with that missing FedEx box opens it as goes: "OMG, these are the stop-motion steps from Flight of the Navigator!!" Hey...it could happen.
@TheSolongsidekick
3 жыл бұрын
Yeah that's not how it works. The box was either destroyed in shipment or had its label meet a similar fate. Meaning it - if it even physically exists - will sit in a warehouse for however much time the law requires and then sent to the trash dump. Unless some lucky but not so discreet FedEx employee grabbed it first.
@JohnDlugosz
3 жыл бұрын
@@TheSolongsidekick That's why packing standards state to include an address card _inside_ the box as well. If it was lost in shipment, by whatever means, why would FedEx claim it had been delivered?
@TheSolongsidekick
3 жыл бұрын
@@JohnDlugosz Packing standards of... citation needed? Especially when every shipping company on the planet says they will never open your package for privacy reasons? And is that last question serious? Driver got to the address, saw that he scanned it onto his truck but can't find it, and to avoid getting in trouble marks it as delivered. Have you never dealt with logistics companies? That type of shit happens all the time. I couldn't even try to count how many times I've seen a package registered as "delivered" when it's provable that it wasn't - via either security camera or just plain not even having a person there to sign for it - in the 12 years I've been shipping/receiving as my 9-5.
@Recicleitor_Maker
3 жыл бұрын
Genial !!!
@holoemiter
3 жыл бұрын
FedEx is the worst, but at least it gives you a reason to visit the captain in person.
@meky0
3 жыл бұрын
ORANGE IS SO SUS
@dstrbd223
3 жыл бұрын
I want thayut!
@thejonesyman
3 жыл бұрын
Can't wait for the "After the five" for this one!
@livefree1030
3 жыл бұрын
I've been subbed to Cap Dis since 2009ish
@VGInterviews
3 жыл бұрын
Great to see all these makers collab with Captain D. Quick question, instead if using the slots for alignment why not just make the square holes wider on one side so the pieces have more space space to adjust alignment but the side view still still closed on both sides?
@3DPrintingNerd
3 жыл бұрын
I mean, that would work too? This was just the solution we came up with.
@ikannunaplays
3 жыл бұрын
If they (FedEx Employee) repackaged it knowing what it was no wonder they "lost" it. I'll be looking on Ebay in a minute
@rhysswitzer
3 жыл бұрын
“FedEx lost pieces of my childhood.” . . . . Sounds about right.
@duncan_walker
3 жыл бұрын
They missed the part where Flight of The Navigator crosses into the Watcher In The Woods universe.
@MrMegaPussyPlayer
3 жыл бұрын
6:09 I kinda doubt it was FedEx, if porch pirates are more plausible
@ezrasalamat2885
3 жыл бұрын
This is awesome!
@4LM3R
3 жыл бұрын
Very nice intro!
@armandoa2484
3 жыл бұрын
Great movie for its time! Still watch it from time to time just for a good laugh. Great job Mr Joel. Thanks 👍 and high five to you🖐
@TheMono25
3 жыл бұрын
I can not believe I forgot about this movie I am going to have to go and watch it
@JohnDlugosz
3 жыл бұрын
I wonder: how did they make the original with square holes? I suppose those posts are cut from (aluminum?) stock and stuck into the carved wooden steps, too; so how did they make square holes for that?
@PhantomGun4
3 жыл бұрын
now i want a model of the ship with those steps. you already made a base for the ship and frame for the steps.
@Slushee
3 жыл бұрын
I was waiting for this from the very monent I saw you in the credits
@seekertosecrets
3 жыл бұрын
6:12 What?! 7:02 I would be miffed that they lost it!
@wyattsitt8374
3 жыл бұрын
You should try printing upside down on an FM printer it's a fun challenge🙃
@OldCurmudgeon3DP
3 жыл бұрын
I think many people are fed up with FedEx.
@radicalxedward8047
3 жыл бұрын
I don’t really get XY Compensation. For me the biggest issue is always the squishing of holes printed on the Z axis but there’s no compensation for that. And how does XY compensation not screw up everything other than the holes?
@TheWeirdologist
3 жыл бұрын
wait is that the *actual* movie prop??? how'd you get it?? :O
@VERY_MAD_ALIEN
3 жыл бұрын
It was until fedex lost it.
@ThompYT
3 жыл бұрын
Fed Ex LOST THE ONE OF A KIND PIECE FROM FLIGHT OF THE NAVIGATOR? HOW?!
@WrenchingWarrior
3 жыл бұрын
Holy crap I forgot all about that movie I saw as a kid. That is pretty cool piece but man. WTH Fedex...
@radicalxedward8047
3 жыл бұрын
Is there an origin story for the high five thing? Always feels weird.
@CelicaAutocrosser
3 жыл бұрын
They "LOST" it. Yeah ok. It'll end up in someone's collection or eBay. OR a FedEX auction. I hate that now they will have no care in the world to return the package to the proper owners "if found" and instead profit from it showing up in an auction. Unless the person who inspects the packages will wonder what the heck is it and throw it away. So sad.
@OMentertainment
3 жыл бұрын
FedEx "Lost" it, then tried to cover it up
@colinwinterburn6136
3 жыл бұрын
Joel have you heard anyone having problems with the way the bed heater affects the bed leveling?
@ewplayer3
3 жыл бұрын
Wow. I thought I was the only person that remembered this movie.
@malfattio2894
3 жыл бұрын
At least he didn't send you all the pieces
@NerdyCraftsmith
3 жыл бұрын
Do you have any tips for the CR-10 Max? I bought one, assembled it, and I am having so many issues with it. I recieve mild shocks when touching the heat bed and the frame. It'll autohome and all that, but when I try to print something, the Z axis doesn't move down to the bed. It just stays still while it's "printing." Ever heard of rhis problem?
@CineZoneYT
3 жыл бұрын
I got an ad for fedex at the end of the video
@3DPrintingNerd
3 жыл бұрын
NO WAY
@CineZoneYT
3 жыл бұрын
@@3DPrintingNerd trying to fix their image lol
@Quadromodo
3 жыл бұрын
Scan his bonce and put it on Thingiverse, he deserves it!
@nitishchowdary6021
3 жыл бұрын
Pls complete the iron man helmet into a model that opens and works pls
@malfattio2894
3 жыл бұрын
Blender can be a little weird when you try and use it for 3D printing
@danielg.jensen3255
3 жыл бұрын
can you please make a review on the qidi tech x-max
@markseidel1476
3 жыл бұрын
Hey Joel how are you myfriend, Im having a problem with my brandnew voxelab aquila. it extrudes fillament backwards. i have another voxelab aquila that works perfect. I looked at the wiring and it looks right compared to other printer. i put it on auto load it goes backwards i put it on auto unload and it come out extruder. So i put extruder from other printer and it does the same thing. help please. Voxelab has proven to be useless for trying to remedy the issue.
@JohnClark-tt2bl
3 жыл бұрын
GG Fed ex.😖
@DesignIncase
3 жыл бұрын
Now we need a choose your own adventure episodes Fedex drivers need to do what Amazon does. They need to snap a picture of the item at the location before they can claim it's delivered. That way they can't just scan it in the truck or leave it at the wrong location. Then again sometimes the push to meet a quota is more detrimental then a late package.
@LaZZeYT
3 жыл бұрын
I've seen some amazon drivers, put the packages down, take a picture, then take the packages back with them.
Пікірлер: 157