Here are some shortcuts to the segments! CraftUnique and CraftBot 3D Printers - 0:33 DyeMansion - 6:43 Raise3D with the E2 3D Printer - 15:27 Desktop Metal Fiber and Shop System - 18:24 BCN3D Epsilon - 25:57 Loctite - 36:21
@TheScarvig
4 жыл бұрын
been there as well and have seen you prep the shots at 6:34 ! thought about saying hi to you, but i kinda didn't want to be "that" fan to annoy you whilst prepping for a video. hope you had a great time in frankfurt while you were there . sadly i missed out on the loctite giveaway but a friend of mine who is a professor at the institute for plastic technology at the university of applied sciences darmstadt h_da got one and i guess if will hear from him how well this stuff bonds. the most amazing booth i found actually was the one where they showed sla printable ceramics. the guy told me that in theory every one who has an sla printer could print their ceramics infused resins, though i guess the debonding and final firing are a bit more complex
@3DPrintingNerd
4 жыл бұрын
Yeah, that last step in post processing ceramics is the tough part :) also don’t ever hesitate to say hi!
@fpvbuilds2023
4 жыл бұрын
Joel, you need to make a video about a diy 3d scanner for 3d lrinting, i am sure it would be a very popular subject
@GTrainRx7
4 жыл бұрын
I am SO GLAD you have shortcuts! Love the content, time-poor! Keep up the good work.
@SeriousMt
4 жыл бұрын
@@3DPrintingNerd Actually thanks a lot for the selfie there after Loctite :) For me the most interesting was the Stratasys system, it was incredible!
@DheerajBhaskar
4 жыл бұрын
Joel is so chilled out and makes even the guest very comfortable leading to better, entertaining conversations. Kudos Joel
@MrSzKrisz
4 жыл бұрын
Thank you Joel. It was a great pleasure to meet you and your team at Formnext. Thank you for the CraftBot Flow generation introduction!
@3DPrintingNerd
4 жыл бұрын
Great to meet you as well!
@JackLe1127
4 жыл бұрын
I like how Joel just came, stopped someone's print, then left.
@3DPrintingNerd
4 жыл бұрын
LIKE A BOSS. Heh.
@odoggow8157
4 жыл бұрын
@@3DPrintingNerd loved it
@radicalrick9587
4 жыл бұрын
Like a Pink Panther.
@jeffvalencia7656
4 жыл бұрын
hahaha
@jimmcclure3657
4 жыл бұрын
My dad used to own a machine shop that did automotive engine rebuilding. I think about all the machines he had to run the shop, and I can see exactly where that metal printer would have fit right in. Instead waiting on OEM parts, like piston rings, or intake manifolds, he could have been manufacturing his own. Especially hard to find bits on older vintage vehicles. Dad's gone now, but that little segment made me really happy. Thanks!
@Arrowed_Sparrow
2 жыл бұрын
You sir, are a life saver. I'm almost positive some of the people at these demos were snatched from the street and placed at a booth. Thank God you know what you're doing and what they're ment to be doing lol.
@SeekTruthinLight
3 жыл бұрын
That mesh, cloth like plastic fabric, is awesome. People are amazing in their innovation; great, you can have the joy of being part of it.
@sloanv2610
4 жыл бұрын
I like when Joel just completely took over the Raise3D booth. Lol
@England91
4 жыл бұрын
That was the funniest part
@pezvicious1130
4 жыл бұрын
not set up ...
@3DPrintingNerd
3 жыл бұрын
It was either that or do a boring interview 😜
@riddlemechris
3 жыл бұрын
When he stopped the print I died a little 😭😂
@noahhastings6145
4 жыл бұрын
I could listen to Pia read literally anything and never tire of her voice
@odoggow8157
4 жыл бұрын
same
@garystinten9339
4 жыл бұрын
Could you imagine her saying Harder daddy?
@minecrad9970
4 жыл бұрын
Gary Stinten yes I could ;)
@minecrad9970
4 жыл бұрын
I would smash
@psy06
4 жыл бұрын
im really impressed with Desktop Metal Fiber machines ! wow
@pollypocket8424
4 жыл бұрын
Pia from Dye Mansion was Awesome, very knowledgeable on the product as well as a fantastic communicator
@kevinprice2274
4 жыл бұрын
18:17 "I hope to get my hands on this pretty soon", he says while literally resting his right hand on it.
@garystinten9339
4 жыл бұрын
Looks at PR rep.. HINT HINT
@joshrobles6580
4 жыл бұрын
This was an awesome video. I'm an engineer in manufacturing, and have some 3d printed fixtures on the shop floor. I've not made it to any trade/industry shows, but your video had given me huge motivation to get out there and see what the market has to offer for 3D printed solutions. Your insight on both the consumer and industrial side of the additive manufacturing space is incredible, thanks so much for the video!
@countrabricksbuildcraze8916
4 жыл бұрын
Cool as ..
@MrSilas2012
4 жыл бұрын
Thank you Joel for covering these events! Please keep doing it. I watch every one.
@3DPrintingNerd
4 жыл бұрын
You got it!
@MrLichmeister
4 жыл бұрын
this was the best 42 minutes ive spent in front of my computer all month! ty for the video, mang :)
@disastermaster1035
4 жыл бұрын
Imagine building house, buildings, components which require hard labour hours, this technology can make possible with a blink of a layer😅
@Psysium
4 жыл бұрын
This video was so satisfying to watch from beginning to end. Many exciting things going on in additive manufacturing! Thanks for all these great interviews!
@3DPrintingNerd
4 жыл бұрын
Thanks for watching!
@shiftyjesusfish
2 жыл бұрын
21:00 "This is twice as strong as steel and half the weight of aluminum". Im sitting alone in my office late at night nerding out in silence and i literally blurted out in almost a yell "what the fuck" when he said that, and he was so casual about it too.....like dude, those qualities are insane, please take my money.
@leofreihofer
4 жыл бұрын
That pink fabric at 11:00 looked amazing. Really impressed.
@3DPrintingNerd
4 жыл бұрын
It was SO SO COOL
@anthonyknight3082
4 жыл бұрын
@@3DPrintingNerd Yeah that fabric was so cool. I wonder where could we download the model. Its definitely not flowalistik, i have searched everywhere on the net and nothing. Do you have any idea where could we find the stl for it.
@samaipata4756
Жыл бұрын
Joel, your documentation about 3d printing is simply the best. Condensed most important, great demonstrated, valuable information, given with such kindness and professionalism, I truly believe it can Not be topped anymore!👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏👏👏👏👏👏👏👏
@chicoriver8606
4 жыл бұрын
Amazing how 3d printing is evolving. Thank you
@ClockworkAvatar
4 жыл бұрын
"affordable" sure has a loose definition.
@autolykos9822
4 жыл бұрын
Yup. Looked up the price and decided that it's not for me yet ^^ Definitely in the price range for professional shops though, even freelancers. If I had, say, a bike shop or a garage, I'd be considering it.
@C_R_O_M________
4 жыл бұрын
Let the free market innovate and they’ll get cheap. Mobile phones and PCs were ridiculously expensive when they started appearing.
@nathanhoberek6681
4 жыл бұрын
$5k+ a year. $150k+ a year for the shop version. Oof.
@intelli07
4 жыл бұрын
The Fiber shop system is $150,000 which is very affordable if you own a business especially manufacturing. I wish I lived in the US so I could go check out the machine in person for my factory. If the parts are really as strong as they say and is capable to post-processing such a heat treatment then.. This machine would definitely be a moneymaker!
@riccaruso7791
4 жыл бұрын
Mike Wang ~ How is it “cost-effective” in comparison to mass reproduction akin to powdered metallurgy, for example though?
@willierants5880
4 жыл бұрын
This video was very well constructed. Great hosting, excellent questions, great filming, great editing. Very well done.
@Gottaculat
4 жыл бұрын
24:46, I see this machine being excellent for making custom firearm parts. Be they replacement parts for obsolete weapons, hand guards, muzzle devices, mounts, stocks, upper and lower receivers, sights, rail accessories, grips, and possibly even casings and bullets themselves. Not sure what kind of pressures the prints can withstand, but maybe even barrels would be an option. The artwork you could do to make truly unique and incredible firearms seems very high with such a machine. There's a ton of money to be made doing that, as firearms are about as personal as underwear, and people LOVE to make their firearm truly their own. Like, imagine making a grip that perfectly conforms to your hand, and a stock that fits you length and cheek weld perfectly. You could make so many people happy with such products, and even make a living off of your designs. I'd be all over a machine like that!
@giin97
4 жыл бұрын
Hey, I'm not the only one who immediately thought this, lol.
@HenrikLaurell
4 жыл бұрын
Big thanks for showing us this kind of episodes! I am a hobbyist when it comes to 3D printing. All this professional stuff which is presented today, some of it will benefit us tomorrow, so still valid for us. /Henrik
@stevenrais9360
4 жыл бұрын
So cool, I'm going to be training on the desktop metal machine in the next few months at my new job
@ProjectRizaRiza
4 жыл бұрын
If you can print metal, can you print pop or jazz?
@3DPrintingNerd
4 жыл бұрын
😂🤣
@shaxuesheng6128
3 жыл бұрын
lol underrated
@jhbluewolf6034
3 жыл бұрын
God forbid printing reggae and dancehall
@freeinhabitant2422
3 жыл бұрын
@@jhbluewolf6034 What about Boot Scootin' boogie?
@johncunningham4820
3 жыл бұрын
Pop and Jazz are too Squishy and Runny , respectively
@richard--s
3 жыл бұрын
It's strange to watch it a year later. I hope, things will get like this again. Sure, it will.
@3DPrintingNerd
3 жыл бұрын
Very strange right?
@chazz.zaragoza.9561
4 жыл бұрын
36:05 it's basic, if you don't have a reliable machine... you're done son! Love this guy lol
@johntheux9238
4 жыл бұрын
The production system has a throughput of 60kg per hour. That's just crazy! The only 3d printers faster than that are for sand mold binder jetting (like voxeljet)
@owencoyne6223
4 жыл бұрын
John theux remember, the metal is 8g/cm^3 so think of 7.5kg of plastic
@johnyjoe2k
4 жыл бұрын
Like how he ask the dude, "Maybe we can try one out?" and the guy's panic sets in! He's like holy shit, better send him one before we get a bad rap.
@TRak598
4 жыл бұрын
The fact that we are going towards carbon fiber application automation is absolutely amazing! Human labor is expensive and what makes current CF parts costly.
@Frostfly
4 жыл бұрын
This isn't the same as what they use in race cars though...Cool, but nothing like as strong.
@codilankford6173
3 жыл бұрын
The girl at the dying booth ... "Why are you standing so close to me!!??"
@azimpetra
4 жыл бұрын
This is so fun to watch, it's like a teacher walking around the class practicing how to Market in interviews.
@ChronicKPOP
4 жыл бұрын
Pia Harlab is beautiful! 💥
@enyoc3d
4 жыл бұрын
desktop metal blew me away! thanks for sharing!
@johntheux9238
4 жыл бұрын
Look at this: kzitem.info/news/bejne/pWmM3YeZspOViqg -> only a few micrometers of resolution, high speed, no shrinkage, 100% density. kzitem.info/news/bejne/w4CAm2SdbYKaZaw -> 400L/H kzitem.info/news/bejne/pJh6qXaub4CpnaQ -> 9 seconds per part kzitem.info/news/bejne/056O3p95kZ6ffKw -> 60 kg/h
@3DPrintingNerd
4 жыл бұрын
Thanks for watching!
@ajaybnl
4 жыл бұрын
Loved the voice of Pia from Dye Mansion. I Like Her.
@3DPrintingNerd
4 жыл бұрын
It was great getting to meet her!
@bradgarrett7790
4 жыл бұрын
That girl was awesome. I love her personality. The hand shake at 13:28 was quirky and flirtatious. They couldn't have picked a better person to represent their display. I think I am in love..LOL
@slimplynth
4 жыл бұрын
How lovely waa the Dyemansion rep :)
@shinigami146
4 жыл бұрын
Glad to see that there are now systems that are "affordable" (according to the manufacturers of the machines) to machine shops in producing parts made of alloys that are difficult to machine. I work at such a machine shop where we machine Inconels, hardened stainless steels, super alloys, etc. Hopefully, in the coming years, they will become more (truly) affordable. One thing that they cannot yet do, however, are very close geometric tolerances into the microns that my company often has to work with, threading needs and surface finishes. Perhaps in time. Needless to say, though, those features can be finish machined after the printer does the heavy lifting of "roughing out" the part. 3D printing has come a long way in a very short amount of time.
@kitecattestecke2303
3 жыл бұрын
Any additive process of these stainless material is susceptible of unhygienic Ingres of bacteria. If you work on machine parts for the food industry don't hold your breath :-9
@Bolt_BDA
Жыл бұрын
Joel is either extremely chill n nice to people or he messes with a unatended printer for fun haha, great video!
@LeeMooEez
2 жыл бұрын
Typically I would skipping some of the stuff in this kinda long content but here…I can’t afford to skip any part since every part is worth the timeline and even if you skipping a bit you’ll lose so many information haha this 42m is packed with information! Great job!😍
@3DPrintingNerd
2 жыл бұрын
Wow, thank you for such kind words!
@LeeMooEez
2 жыл бұрын
@@3DPrintingNerd welcome and continue the great job! 😍
@JohnPaulEnsign
4 жыл бұрын
I like how you adapt to who you're interviewing by pronouncing things the same way and using their dialect's version of words. It's subtle, but I am sure it helps with the interview.
@3DPrintingNerd
4 жыл бұрын
I really try to make whomever I'm talking to as comfortable as possible. I meet a lot of people who, once the camera is on and the red light blinks, they have a hard time speaking.
@jimstamper7062
4 жыл бұрын
thanks Joel. Love seeing what the big boys are doing in the 3d printing world and wondering what will trickle down to us hobby level players.
@garagemonkeysan
4 жыл бұрын
So cool. Mahalo for sharing all this new technology! : )
@3DPrintingNerd
4 жыл бұрын
Thanks for watching!
@erich3784
3 жыл бұрын
That Desktop Metal Fiber machine frightens me to no end
@rogero9633
3 жыл бұрын
Just as you were talking "so excitedly" about the industrial side of 3d printing, I too am excited and fascinated by this aspect. I was thrilled when 3d printing just came--to-be years ago. But when it came to be that metal could be used in a 3d printer for the Industrial market. They can do this and spend the money but I can't afford this amount of dollars! But do I wish I could. You heard that fellow say the words abut a piece of metal that was printed - twice as strong as steel and half the weight of aluminum!!!!!! what!!! How can this be done with a machine that is any one of the techniques that are used in 3d printing. I'm used to a lathe and a chunk of steel to be turned or drilled or filed. I'm mystified that a substance can be applied from a liquid or paste or melted onto the new part from a roll and in a short time be a functional part. I want to say I believe that 3d printing and now metal 3d are the latest points in history to become important turning points in the evolution the industrial age. Similar to the impact that Space-X will have on mankind's roll in space and where he will end up in the next 50 years.
@calebandrewcox826
4 жыл бұрын
Another great conference video Joel and Sean! The segment at the end with Loctite in particular was excellent, and it's helped me decide finally to get a resin printer as the next to add to my bench. I'm blown away by the properties of some of those materials they've already come up with (good clips of those BTW). =]
@Aidenn23
4 жыл бұрын
Caleb Andrew Cox thank you! Very much appreciate the kind words! Gotta give props to our producer, David, too! :)
@sergesmith2863
4 жыл бұрын
would love this printed metal application for aviation parts. Many part could be done with this and lighten it up.
@eliasprice7553
4 жыл бұрын
Rocket lab uses 3D printed engines on their electron rocket
@esotericyetti327
4 жыл бұрын
I worked at Lockheed Martin for several years. They're using 3d metal printing. Has sped up prototyping by orders of magnitude.
@landonkovach8646
4 жыл бұрын
GE's LEAP engine has 3D printed components. I know at least the nozzles are printed.
@meoff7602
3 жыл бұрын
@@esotericyetti327 Prototyping is clearly where 3D printing is most profitable. For now.
@AndrewAHayes
4 жыл бұрын
I love those Craft machines, I wish they would do a hobbyist printer as I'm sure they would bring something new and very cool to the hobby scene!
@garystinten9339
4 жыл бұрын
Yeah I think a lot of people are feeling the same however it may kill the car part market..
@sheldonthomas8773
4 жыл бұрын
I watched the whole video, and i'm a serial fast forwarder
@emmettturner9452
4 жыл бұрын
Same!
@Aidenn23
4 жыл бұрын
Thank you!
@odoggow8157
4 жыл бұрын
we all are, the internet has turn us all into instant gratification zombies. i used to be able to focus on one thing for yrs but 6mnths of youtube n i cant stick to one thing for more than a few minutes even if enjoying it
@jetstream321
4 жыл бұрын
Ric, that ceo of desktop metal is so cool! hope we get a video of you actually driving that BMW soon!
@troybutcher6451
3 жыл бұрын
This is all very new and very interesting to me. I never knew how far advanced and relatively affordable 3D printing really is.. Now I can't afford it especially RN with being hurt and the current climate. But I never knew how readily available some of these 3D machines were.. Or the different types of materials they were capable of working with. NTM that some many people own them for personal use. I always thought it was manufacturers or shops! Which has it's perks and downsides depending on how your looking at it. Yes, you can build things more efficiently, timely and presumably safer. But the downside would seem to put the everyday blue collar man out of work.. Or atleast that's what you assume seeing such innovative technology! I'm all for doing things smarter, not harder.. But I've always taken pride in hard work bc that's how I was raised. My dad and mom both worked hard labor and long hours when I was growing up. I seen how hard they worked and we still barely made ends meet. Yet, I have mainly worked hard labor jobs myself for most of my life. And I always took pride in my work and working harder then the next guy! These 3D Printers are going to change all that from the look of it. Now it's all about pushing buttons, running machines/computers and maintenance. It's an incredible machine and I'd love to have one! I just hope theirs enough jobs to go around in the Future. P.S. You noticed certain things when you work in hard labor companies/businesses though. Usually the hardest working people never seem to get promoted.👀 While the guy that barely does anything all day.. Spends hours in the bathroom and bullshits with all the big wigs "Always Moves Up The Ladder"!🤨 I think I finally figured it all out though. Why would anyone promote their hardest workers when they want you exactly where your at!🧐 Who makes sure everything gets done and has production through the roof!🤯 They don't want the guys who barely work "In Production" or "Effecting Their Overhead/Margins". So they promote "The Laziest People" who they enjoy hanging out with and talking too! It's a BACKWARDS 🍑 PHILOSOPHY but I now understand why they do it now. Because if I was in their position, I probably do the same damn thing!🤔 It's sad I know, but when you ACTUALLY UNDERSTAND HOW THINGS WORK.. THE TRUTH HURTS!🤯
@welbot
4 жыл бұрын
Absolutely loving that material with the logo already in it! That's well cool stuff!
@odoggow8157
4 жыл бұрын
a useless thing that shows the true potential complex designs achievable, my fav is nasa n their reinvention of the wheel game changer if ever there was one
@sldkjh
4 жыл бұрын
That material is probably made by Loctite, the white block shape seems like the same material .
@welbot
4 жыл бұрын
@@odoggow8157 It might be useless to many, but it's a nice small, portable thing they can transport easily to shows, that still shows the potential of what can be done.
@NAK3DDesigns
4 жыл бұрын
Wow, that was fast. I only made the metal sintering printer suggestion an hour ago. 👍
@truetech4158
4 жыл бұрын
Haha, coming soon, innovations as fast as you can think about them.
@odoggow8157
4 жыл бұрын
@@truetech4158 in the future there will be automated production facilities that we just like dominos n just eat send our order to then pop in a collect, new custom car new custom shoes new custom umbrella, have a design app literal inventions to order and the end of clone mass production, printing products as and when required so reduced waste, then software that can just replicate a design straight from a thought! oh wats that old sci fi movie were they find an extinct alien races automated city where they could do just that
@Chronosonder
4 жыл бұрын
Joel you are an amazing interviewer. Love these!
@3DPrintingNerd
4 жыл бұрын
Thank you!
@odoggow8157
4 жыл бұрын
@@3DPrintingNerd yes very very good, especially the questions and feedback you generate, so refreshing not working to a manufacturers product script just genuineconsumer concerns and enthusiasm. its the honesty very rare these days
@Henchman1977
4 жыл бұрын
Big head problems - 9:08 When I shop for glasses, I figure out which one's fit first, then decide if I like them.
@truetech4158
4 жыл бұрын
It would be trippy to print custom fit super light weight glasses, at least untilable to print multi clear material web enabled contact lenses, and then of course the way things are going, being able to print a organic proper eye that has night and macrovision on demand, while producing exact point cloud copies of landscapes and anything seen through them, though that last option would have to be done outside of the earth's atmosphere using offsite printing. What happens when the universe itself runs out of storage space for more 3d prints?
@ultraokletsgo
4 жыл бұрын
That Pia is something special, so chill!
@3DPrintingNerd
4 жыл бұрын
She is super rad!
@Zachary3DPrints
4 жыл бұрын
I love this channel, very informative Joel!
@Zachary3DPrints
4 жыл бұрын
I hope to see you next year at Formnext!
@andycrowley6442
4 жыл бұрын
The dude at the start cannot stop dancing 😁 very proud of that
@Cyber_Cowboy
4 жыл бұрын
Here's a tip to remember X,Y,Z X=XXX (left to right), Y= you eat at the Y (front to back) Z =think of a spring getting compressed (top to bottom)
@fu-opent
4 жыл бұрын
If only metal printing could be popularized
@johntheux9238
4 жыл бұрын
There is MIM based filaments: kzitem.info/news/bejne/s6KY4HaMpXOLaZw Would be awesome to create an MIM powder designed for the formlabs fuse 1.
@jessie38supercharged
4 жыл бұрын
heat water to 250f, pour in bottle of rit dye and soak plastic part until desired color of plastic is achieved. vinegar can help in opening the pores of plastic for a deeper dye.
@redserpent
4 жыл бұрын
Your show is great, but to be honest what really grab my attention was the BLUE, electric blue of your jacket and lettering in the t-shirt. awesome. I did learn a lot about industrial 3d printing. Thanks
@caseygunter6813
3 жыл бұрын
For some reason i laughed my brains out when they greeted each other at the beginning
@Theyoghurt2
4 жыл бұрын
i do fair construction in frankfurt and i was working at the fair and geeked the f out, such good stuff there
@EricYouTube578
4 жыл бұрын
Best formnext video ever! Thank you Joel! This is what I wanted to see!
@3DPrintingNerd
4 жыл бұрын
Wow, thanks!
@SeekTruthinLight
3 жыл бұрын
Those blue glasses fit you well... by chance.
@stonehaven2289
2 жыл бұрын
BMW North America's plant is in my hometown of Spartanburg SC.. they have a high tech test track across from the plant.. those people he mentioned probably have used the track here in Spartanburg SC..
@_blair5759
2 жыл бұрын
Desktop metal awesome.
@zeretube
4 жыл бұрын
Thank you very much for this interesting tour by the expo. A lot of interesting things.
@3DPrintingNerd
4 жыл бұрын
Thank you for watching this tour!
@willierants5880
4 жыл бұрын
For me DM stole the show. Holy cow. Just think, one day those printers (Fiber and Metal) will be consumer affordable assuming governments stay out of the way. Loctit was also very compelling. I have no doubt you have some adhesive samples on the way. It would be very interesting to see how Loctit stacks up with say 3D Gloop. Magigoo and other products. I hope Loctit is working on non-toxic resins. Who knows if they are even possible. Time will tell.
@3DPrintingNerd
4 жыл бұрын
The DM presentation was exceptional. Spot on for industrial AM advances. I also really loved chatting with Pia at DyeMansion. I hope to feature more on their tech soon!
@willierants5880
4 жыл бұрын
@Benjamin Muller On the point of robots, true, but as some jobs are eliminated new jobs are created. This can be difficult for those in the jobs that are eliminated, but hopefully they are flexible enough to transition.
@johntheux9238
4 жыл бұрын
There is cheap metal filament you can buy: kzitem.info/news/bejne/s6KY4HaMpXOLaZw
@TheKIba1997
4 жыл бұрын
the print quality at the beginning looks awfull
@OldCurmudgeon3DP
4 жыл бұрын
My Ender3 does that or better at faster speeds. Yeah, didn't see any innovation in that company.
@outsider344
4 жыл бұрын
@Thu Nell Ⓥ I think you are right. Looks like the supports are being printed a bit to fast and its making them look sloppy. Probably wanted to print as fast as possible at the show to make it look impressive to passers by.
@TheEvilVargon
4 жыл бұрын
@Thu Nell Ⓥ Even the regular print beside the supports looked pretty bad.
@AquaticSCP
4 жыл бұрын
What printer
@fuse3d
4 жыл бұрын
Old Curmudgeon i have 3 craftbots and 2 ender 3s you cannot even compare them. The CBs are outstanding and just go and go the enders print ok but nothing like the cbs (completely different levels of quality)
@Masteryogis
3 жыл бұрын
( 4:00 - 4:15 ) 👀 Yes Man 😁👍🏻
@bmar1001
4 жыл бұрын
Just bought myself an enter 3! Much excite!
@stevesloan6775
4 жыл бұрын
That’s the best video upload you’ve done in my eyes. Great professional delivery and interview style. Keep up the great work🇦🇺🤜🏼🤛🏼🍀🤓😎
@joearchuleta7538
4 жыл бұрын
Nerd DUDE......... Love this episode!!!.........Thanks for sharing!!! Did you see any SLS printers at this show!!!.........I hope that will be you're next EPISODE!!! Happy Holidays to you and your crew and family!!!.........HIGH FIVE!!!
@3DPrintingNerd
4 жыл бұрын
Thanks for watching as always!!!
@mattkeegan1359
Жыл бұрын
the loctite 416 glue is great for attaching PLA parts
@tancakar8987
4 жыл бұрын
carbon fiber printing ! insane ! mind blowing !
@mimked
4 жыл бұрын
So, what I learned from this video is that I can get one of those fiber machines for only about $300/month. Very cool. Now I just have to think of a really good use for it...
@3DPrintingNerd
4 жыл бұрын
My personal thoughts - if you can use that to make products, and you can sell more than $300 a month in product, that’s a good idea n
@mimked
4 жыл бұрын
@@3DPrintingNerd those are my thoughts, too. I just don't have any product ideas yet, lol.
@st_us
4 жыл бұрын
ADS are getting smart, the first interview, asking questions already discussed before and they both act surprised. funny as hell.
@anotherelvis
3 жыл бұрын
I love your enthusiasm.
@SinanAkkoyun
4 жыл бұрын
Okay this carbon guy and printer are awesome af
@createbotr3dprinters391
3 жыл бұрын
WOW, wonderful!
@aifirm2566
3 жыл бұрын
8:49 look at his face trying not to laugh LMAO!
@GT.Bugger
3 жыл бұрын
Carbon fibre and metal printing = mind blown.
@friddevonfrankenstein
3 жыл бұрын
"...that everybody can afford..." "...starts at $3499/yr...." uhhhhm....yeah
@catdisc5304
3 жыл бұрын
I mean, while saying "everyone can afford" is a bit exaggerated, it's extremely cheap for businesses that would benefit from such a machine. If you get that machine you wouldn't use it for your everyday 3D printer use but for industrial design that isn't just mock up prototyping but actual functional, heat resistent, fast prototyping
@nhankhuu5643
3 жыл бұрын
I think she's referring to businesses. She's in a conference geared toward businesses. This is very affordable.
@user-sz2px8pv3f
3 жыл бұрын
3500 dollars isn't a lot of money. What's the problem with that
@ETuss713
3 жыл бұрын
Thats less than $300 a month.
@ragstocardboard
2 жыл бұрын
Say you don't have a job, without saying "I'm unemployed"...
@dlugas251
3 жыл бұрын
Perfect prints lasting few weeks only. Great!
@peterdavies2815
3 жыл бұрын
Would love to know more about metal printing considering the high temperatures for these materials to fuse together
@evilcanofdrpepper
3 жыл бұрын
For a 3D printer set up to truly fit in place in a machine shop it needs to be built off of a CNC chassis and to normally run as a CNC but be able to have a printing head that fits into it so that you can use the machine during everyday use as for a shop that is not constantly using that is otherwise wasting space. It wouldn't need to be as good as a normal CNC but it would need to be able to make its self useful in other ways or combining both additive and subtract manufacturing on the same part and possibly with other steps like sintering or refinishing the outside to create an amazing part.
@ratstarone
4 жыл бұрын
LMBO!!!!! when she said they made the first 3D printed shoe Joel look at her like ever!!!! Another company has sent him some 3D printed shoes last year or a year before.
@Aidenn23
4 жыл бұрын
She said it was made in 2015 ;)
@3DPrintingNerd
4 жыл бұрын
2015 was when that shoe was made. The shoes sent to me was 2017 I think.
@Aidenn23
4 жыл бұрын
black amigo also, she was correct at least by a technicality, as under armor did produce the first 3D printed shoe (the one she was holding) that made it to market, albeit with a limited 96 pairs.
@ratstarone
4 жыл бұрын
@@Aidenn23 wow I didn't know that. Thanks for the update. Keep up the great work, I follow you.
@ratstarone
4 жыл бұрын
@@3DPrintingNerd thank you so much for the info. I was a bit off.
@KtotheL
4 жыл бұрын
i loved when he said yes you will be getting 1 ;) ;) ;) and then that pink fabric !!! so exciting :)
@hoverbotfpv1425
3 жыл бұрын
Wow conductive filament and plating is a huge deal.
@garystinten9339
4 жыл бұрын
That shop printer.. Iron man anyone?
@onepercentile
4 жыл бұрын
It's pretty cool that you're making a show out of the 3D printing world. I've learned so much from your videos. It would have been cool to have gotten into the 3D printers when I was local to Seattle in Port Townsend. I'm now in the Philippines with the interest in part manufacturing. Thanks again for the invaluable info.
@3DPrintingNerd
4 жыл бұрын
Thanks for watching, Jordan! Oh wow Port Townsend - my family uses to visit Ft Warden!
@johgranger1304
3 жыл бұрын
Man to man, I have to say: those 3D printed glasses look really good on you (HUGE upgrade over your regular ones).They were too narrow for you but the shape just fits you man.
@swapniltiwari5330
4 жыл бұрын
Wow, that is lot of valuable contemporary insight, thanks a lot Joel!
@joeferreira657
2 жыл бұрын
Love how 3d printers work.
@SusiBiker
4 жыл бұрын
Love it that you ran away from the Raise3D stand! Raise3D look like they are making useful improvements once again (and not just upping the price 😉 ). Thank you so much for showing in this vid that you are a big kid like the rest of us. Was having a rough day until I saw this. Thank you. You made me smile. 💖😊😊
@3DPrintingNerd
4 жыл бұрын
Aww thank YOU for watching and telling me such nice things!
@sycoaniliz
4 жыл бұрын
I LOVE seeing these videos
@3DPrintingNerd
4 жыл бұрын
I LOVE making these videos!
@Kappi1997
3 жыл бұрын
13:44 back then a joke would be a legit way to greet now XD
Пікірлер: 868