two years later and it is still the best info on these discs. thanks!
@CelticDreamsCoUk
7 жыл бұрын
Well, thank you for taking the time to leave such a lovely comment. It's appreciated. Dave
@Ensoniqdude
3 жыл бұрын
Some just “have it” when making tutorial videos….and you sir are informative as well as talented!!!
@CelticDreamsCoUk
3 жыл бұрын
So nice of you. Thanks for watching. Dave
@Lucy-wi5wj
7 жыл бұрын
I wish I'd had these years ago! Bought a kit (yellow, blue & green) but realised you def need a pink before green to get a perfect mirror polish. Great video.
@CelticDreamsCoUk
7 жыл бұрын
Do ensure you get the genuine 3M ones. Different manufacturers use different colours. I find the light green are usually my last stage. But yes you are correct, you need to work up through a couple of grades first. personally I love the yellow ones. great for removing tarnish and cleaning a joint before and after soldering. I just wish they where cheaper. Thanks for watching. Dave
@RobFisherSA
4 жыл бұрын
I wish I had found your channel ages ago... love your style and your clear voice and real-world info. Thank you! Subscribed and now going to go through all your videos!
@CelticDreamsCoUk
4 жыл бұрын
Thanks and welcome. There's a lot to watch! and way more information on Tronex pliers than anyone really needs to know. Check out the HOW TO projects for the best videos and seeing all the tools in action. Dave kzitem.info/door/PLecOyNn7zT7y6DECwvH2TK4sO0xOQYJEY
@elisazulueta9535
10 ай бұрын
Excellent products, I have been using them for awhile now, ❤
@CelticDreamsCoUk
9 ай бұрын
Glad you like them! Dave
@bubblesndoodles
5 жыл бұрын
I have been going crazy looking for something like this thank you for the tutorial
@CelticDreamsCoUk
5 жыл бұрын
You're welcome. Glad to have helped. Dave
@Dizzycow-Tina
9 жыл бұрын
Great explanation on how to use the discs .. many thanks .... Tina
@CelticDreamsCoUk
9 жыл бұрын
Thanks Tina, Glad you found it useful. Dave.
@tarzansingh8436
4 жыл бұрын
Excellent concise demo/tutorial, sir. Thank you.
@CelticDreamsCoUk
4 жыл бұрын
Glad it was helpful! Dave
@johnhenry6057
4 жыл бұрын
FANTASTIC VIDEO. Thank you
@CelticDreamsCoUk
4 жыл бұрын
Glad you enjoyed it! Dave.
@felixf5211
4 жыл бұрын
If I may, at the risk of being "that guy," bristle discs and Scotchbrite buffs are totally different animals. Scotchbrite buffs are essentially made from the same material as 3M's abrasive pads for household cleaning, automotive paint prep, oxidation removal, etc. A highly porous material. The bristle discs are based on 3M's Trizact abrasive, one of the reasons they cost so much more than Scotchbrite buffs. An essence, a series of triangles that break into smaller triangles as the product is used. Enjoyed the video. I just love the bristle discs.
@CelticDreamsCoUk
4 жыл бұрын
Wow. Thanks for that technical explanation. It certainly explains the price of them. But as you say, love them. Thanks for sharing. Dave.
@honza2171
Жыл бұрын
not technically true. Trizact and Cubitron II arent the same thing
@jettevittrup9935
3 жыл бұрын
Great tutorial, thanks 🙏👍😊
@CelticDreamsCoUk
3 жыл бұрын
You’re welcome 😊 Dave
@Melimoments
3 жыл бұрын
This was perfect! Thx 🙏🏻 you! Could you please do a brief one on when to use the tumbler for Sterling Silver items please.
@CelticDreamsCoUk
3 жыл бұрын
A few tumbling tips throughout my videos, before i got the magnetic polisher. Check out this one below for all you need to know.. Dave. kzitem.info/news/bejne/2o582GqohYGpoKg
@ActiveAtom
Жыл бұрын
Great totally understand what these can do for us here. Now we know what it is we need to order excited to give them a swirl. Watchmakers Lance & Patrick.
@CelticDreamsCoUk
Жыл бұрын
Thanks, that the exact point of my videos. to show you what it is and what it does. Up to you to decide if you need one or not. Thanks for watching, and for taking the time to comment. Dave
@ActiveAtom
Жыл бұрын
@@CelticDreamsCoUk Bought them a sampling set to experiment with including the arbors, looking forward to giving them a spin, thank you again for sharing with us. Lance & Patrick, and oh hey Happy New Year 2023.
@user-gr3rk6ur2p
3 жыл бұрын
so excellent thank you Mr. Wilson from Edward 12/28/2020
@CelticDreamsCoUk
3 жыл бұрын
Thanks for watching. Dave
@JohnGrimsmo
6 жыл бұрын
Fantastic video, I can't believe I didn't know these existed! I'm going to mount them on my CNC mill for in-machine deburring ;-).
@CelticDreamsCoUk
6 жыл бұрын
If you look around you can get larger ones for use on bench polishers etc. The yellow ones are awesome for removing scratches. Dave
@nickjm007
9 жыл бұрын
Excellent review
@CelticDreamsCoUk
7 жыл бұрын
Thanks for watching. Dave
@kathrynnewton8721
4 жыл бұрын
Great to here an English accent on a video! Don’t think we can get these in South Africa though!
@CelticDreamsCoUk
4 жыл бұрын
Thanks. Perhaps you can order online and get them posted from elsewhere. they are small and light so should not cost much to post. Dave
@losxlakers
Жыл бұрын
How powerful of a Dremel do you recommend for polishing jewelry?
@CelticDreamsCoUk
Жыл бұрын
Any will do. You don't need lots of power for polishing silver rand gold. Dave
@losxlakers
Жыл бұрын
@@CelticDreamsCoUk Are these radial brushes safe on gold?
@naggano
4 жыл бұрын
Thank you! I'm getting some of these to polish seeds for jewelry making. I've been making my own discs with regulard sandpaper, but I think these radial discs would do a way better job. I have just one question: how long do they last?
@CelticDreamsCoUk
4 жыл бұрын
Impossible to say, it depends on what you're doing and how heavy you are with them. I ve found that the coarser grits wear out quicker and the finer ones seem to last longer. I can also say that the genuine branded 3M discs last way longer than other such as the evebnflex versions. hope this helps. Dave
@naggano
4 жыл бұрын
Celtic Dreams I’m mostly only going to sand and polish some natural seeds (sea beans). I usually start with the 80 grit and work my way up to 2000. I’m mostly worried that the discs are only going to last 3 or 4 times.
@badboyere100
4 жыл бұрын
How often do these need replacing am I better off just getting different polishing compounds?
@CelticDreamsCoUk
4 жыл бұрын
The finer grits last longer such as the green. The harsher grits like the yellow wear out quicker. I wouldn't say they are a replacement for traditional mops and polishes. They are an 'additional' method when your in a hurry, or just require a small touch up. Dave
@jaydencparker4968
8 жыл бұрын
Thank you for this! I use these myself and love them for clean up and pre polishing in my own work. May I ask why you recommend not mixing older discs with new ones? I admit to mixing them to stretch out their use. But if there is reason not to I'd love to know :)
@CelticDreamsCoUk
8 жыл бұрын
+Jay Cuneo Hello. Firstly the discs reduce in diameter when they wear down, hence new discs will be bigger in diameter. They will also be sharper and cut more. Hence a combination of the two will result in a uneven finish. Also, older discs may be dirty or contaminated, so adding the newer discs will be a waste of time as the finish is only as good as the worst disc. I too use them way past their best - I just wish they where cheaper. Thanks for watching. Dave.
@jaydencparker4968
8 жыл бұрын
Thank you Dave, makes sense. I'll change my methods. Just got in new mandrels so I'll can hold on to a set of old ones when I don't need as much grit and have fresh sets on standby for when I do
@MrRawUK
2 ай бұрын
Hi Dave. Will these work on a lightly scratched silver mens watch bracelet ? Or is there a different method? thanks
@CelticDreamsCoUk
Ай бұрын
If the item is lightly scratched, then polishing is the way to go.. Se my video here on polishing a mens bracelet...Dave kzitem.info/news/bejne/qqxstIJ5pYyVgYosi=1pRIm73sJgZZeoR7
@heatherelizabethallen8563
5 жыл бұрын
What would you recommend for removing excess solder? Eve flex or spiral brushes please?
@CelticDreamsCoUk
5 жыл бұрын
For removing solder you really want something firmer. That way you can remove solder but not the metal around it. I use thick abrasive rubber wheels with square edges (Eveflex discs), or knife edge wheels for tight areas. Or course the skill is to avoid using excess solder in the first place, and eliminate the need for cleanup afterwards. But when it comes to final finishing of the area, then these 3M radial discs are far superior and longer lasting than the eveflex version. Hope this helps. Dave
@heatherelizabethallen8563
5 жыл бұрын
Thank you
@ricfootball
5 жыл бұрын
Dave do you reckon a brown one, the lowest grit, would sand paint off architrave on a door?
@CelticDreamsCoUk
5 жыл бұрын
A lot of work sanding a door and you'd go through a lot of discs. I'd recommend a "flapwheel". More aggressive and will last longer. See link. Dave www.dremel.com/en_US/accessories-and-attachments/-/subcategory/accessory/find-by-tool/27343/rotary/27381
@JackMinardi
3 жыл бұрын
How many rings could you polish before needing to replace the disks?
@CelticDreamsCoUk
3 жыл бұрын
Impossible question to answer. it depends on how hard you push, which discs you use, the speed and of course how long it takes you to polish each ring. but what I can say is that the 3M radial discs are "very" long lasting, especially compared to the silicone ones such as the eveflex. Dave
@JackMinardi
3 жыл бұрын
Celtic Dreams thanks for the answer! As someone who is new to jewelry polishing, even an order of magnitude would be helpful. Is it closer to 1, 10, or 100 uses before needing replacement?
@CelticDreamsCoUk
3 жыл бұрын
@@JackMinardi Say 20 rings before you'd need to change the discs. But as above, - many variables. Hope this helps. Dave
@JackMinardi
3 жыл бұрын
@@CelticDreamsCoUk Thanks!
@mazharulhaq3316
7 жыл бұрын
excelent.doig great job.Regards.
@CelticDreamsCoUk
7 жыл бұрын
Thanks. Dave.
@laurenyoungs
4 жыл бұрын
Do you still have to clean your metal in between each different disc?
@CelticDreamsCoUk
4 жыл бұрын
Not like you would with traditional polish, as there is no greasy residue. Just wipe away any dust and carry on. Dave.
@moto_tech_braap_itout9852
4 жыл бұрын
Which color do you recommend for polishing atv/dirtbike engines ?
@CelticDreamsCoUk
4 жыл бұрын
I know nothing about bike engines. But the yellow is the most abrasive one. note the chart in the video. Dave.
@brentjames9388
3 жыл бұрын
Just learned of these, Any idea where I can buy them in Canada 🇨🇦?
@CelticDreamsCoUk
3 жыл бұрын
try.... www.gesswein.com/or www.riogrande.com Dave
@manz1397
5 жыл бұрын
Would these be safe to clean aluminum engine gasket surfaces?
@CelticDreamsCoUk
5 жыл бұрын
I''m not an engineer, but I don't see why not. They are designed for polishing soft metals. The finer ones, such as the green or pink, would have more of a cleaning effect. whereas the coarser grits would have more of a polishing effect. Dave
@les2475
8 жыл бұрын
Hi Dave, Which discs would you recommend to remove lot of scratches & polishing a stainless steel watch case that has also semi precious stones set in it?
@CelticDreamsCoUk
8 жыл бұрын
+Les 24 As with any scratch removal, you'd start with a coarse one to remove the scratches and then work up to finer grits to get a polish. The brown is the coarsest, so Id probably start with that one. Then move to a yellow, I use this a lot on silver, but the steel may need the brown one first. Blue will start to get a smooth slightly satin finish and pale green to finish. As with everything, it will take time, especially in steel and be careful around the stones, especially with the brown disc. see the link below there is an image of the whole range which I made for Eternal (under the main pic) www.eternaltools.com/polishing-abrasives/3m-radial-bristle-polishing-discs Depending on how deep the scratches are, you may prefer to polish them out using a cotton mop and some polishing compound www.eternaltools.com/polishing-abrasives/mounted-calico-wheel I can highly recommend Menzerna IP grey polish as used in many of my videos, but I only know of Sutton tools that supply it in the UK www.suttontools.co.uk/menzerna-p164-polishing-compound.html Hope this all helps you out. just shout or email me direct if you need any further advice. Dave.
@les2475
8 жыл бұрын
+Celtic Dreams Thank you for all the helpful links... You have been so helpful, I though you may appreciate seeing the job I am looking to tackle. Please add any strategies you would use here. Thanks! www.auctiva.com/hostedimages/showimage.aspx?gid=1692620&image=851598642&images=851598605,851598592,851598624,851598642,851598656,851598676,851598690,851598703,851598719,851598733,851598750,851598766,851598781,851598794,851598807,851598820,851598827&formats=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0&format=0
@TashasTouch
4 жыл бұрын
thank you
@CelticDreamsCoUk
4 жыл бұрын
Glad you found it useful. Dave
@desmondmurphy449
7 жыл бұрын
I remember when these first came out, a salesman for a tool company came into our store and gave some free samples to us bench guys. The first time I tried one all the "bristles' tore off and went flying around the room. I'll stick with regular brushes with tripoli and rouge, thank you.
@CelticDreamsCoUk
7 жыл бұрын
I've never had that problem. Forgive me for saying the obvious, but did you have them the right way round?. I have tried a few others though like the Eve twist ones and they are no where near as good as the genuine 3M ones. So I would definitely encourage you to try them again, but ensure you get genuine 3M ones - they 'are' good.. Kind regards, Dave.
@desmondmurphy449
7 жыл бұрын
Yeah, I have been doing this for a while. 40 years at the bench. Sorry but IMHO these things are crap.
@CelticDreamsCoUk
7 жыл бұрын
I can only repeat that I love them, and likewise several other jewellery friends do to. However , In the spirit of an honest review. I will include your thoughts. Thanks for Sharing. Dave.
@derbigpr500
6 жыл бұрын
Desmond Murphy Sorry but you're a perfect example of someone who's been doing something for a long time and because of that you think you can't improve it. People use these all the time and they're excellent, and you jumped into the conclusion that they're crap because you used it ONCE, and most probably in a totally incorrect way.
@bingefeller
4 жыл бұрын
Hi Dave do I need polish with any of these 3M wheels?
@CelticDreamsCoUk
4 жыл бұрын
No. The abrasive in mixed in with the rubber. Just use them dry as they are. Dave
@bingefeller
4 жыл бұрын
@@CelticDreamsCoUk Thanks, Dave. :-)
@turnercarl
8 жыл бұрын
could theirs be used on glass or plastic protective watch face
@CelticDreamsCoUk
8 жыл бұрын
+Carlos Vanquish ... I've only used them with silver and gold.When polishing glass watch fronts you usually need a strong abrasive such as diamond and there are special creams for doing this. Vice versa plastic is usually polished with a soft mop and special compound.....see the links. Dave. www.eternaltools.com/polywatch-scratch-remover www.eternaltools.com/diamond-polishing-paste
@MrDexter9i3
8 жыл бұрын
How long do they really last? How durable are they?
@CelticDreamsCoUk
8 жыл бұрын
+Dexterko They do seem to last very well. As they are "impregnated" rather than coated, they never loose their abrasive quality. What happens is they get smaller as they wear down. I have a set of yellow ones which I've had for a few months now and they are pretty much worn down now (used several times a week). They may seem a little pricey, but they do last. In contrast some polishing points and rubber tips can wear down in seconds on one task.
@MrDexter9i3
8 жыл бұрын
+Celtic Dreams well, nice to see someone has made a product that is genuinely good! GJ 3M. Thank you for the reply!
@rajasoni8116
6 жыл бұрын
is motor ko kya kaha Jata Hai Aur Yeh aor market Mein available hai kya
@CelticDreamsCoUk
6 жыл бұрын
Foredom SR. www.foredom.net/flexshaftkitsandsets.aspx Dave
@thebikeguy8868
4 жыл бұрын
nice to watch you sound a wee bit like Fred Dibna LOL
@CelticDreamsCoUk
4 жыл бұрын
Not far from it. He came from Bolton only a few miles away from Wigan where I come from, So yes quite similar accents. Dave.
@manuelabella7760
4 жыл бұрын
Great tutorial but copper is toxic and you should protect yourself while working on it.
@CelticDreamsCoUk
4 жыл бұрын
Copper is toxic? Ive never heard that before. The pipes in my house are copper and many people buy copper bracelets for arthritis. But certainly dust in any form isn't a good thing, so a dust mask is always recommended when sanding and polishing. Thanks for watching. Dave
Пікірлер: 93