The led bulb should be a 2-piece...you could basically twist it, and then pull back. The H4 socket should stay in the Headlight housing. Put back the rubber boot from the back, and put back the led bulb. Hope it helps...
@ericsullivan4381
3 жыл бұрын
This. I just put mine in and it took me a sec to realize lol
@TheRealJonsMind
3 жыл бұрын
So, should be no need to modify the boot?
@rodneydoelahasori2640
3 жыл бұрын
@@TheRealJonsMind no…the bulb itself should be 2 piece…just twist it loose
@toyotabrony
26 күн бұрын
I know this was 3 years ago But stay away from the multisided led bulbs. They never work to match the same beam pattern as oem. And stay away those cheap no IP rated T10 led bulbs. I highly recommend Lasfit - LA plus, LC plus, or LS plus for ur headlights. Since they have two sided with tiny little CSP led chips. They will perform well and easily outperform against those horrible led bulbs. And get ur hands on sylvania - zevo T10 if u want reliability and longevity with a good brightness, or if u want scortchingly bright, get Lasfit - L series T10 led bulbs. Definitely recommend for ur 4Runner.
@thomasjefferson3552
4 ай бұрын
How they holding up? My gen 3 is a 98 and lights are far too dim, cant decide if its worth the 500 dollar teq light housing kit or not..
@palangnar3588
9 ай бұрын
This is 3 years after this video, i just changed my light bulbs of my 1997 4Runner, and they came just like the original bulb, did not have the hanging plug, maybe your time of this video you could only get your style LED bulbs , very easy to change, good as always design from Toyota company.
@cameronsmith3098
3 жыл бұрын
what exact size led bulb did you get for the corner lights
@smartestideas9630
5 ай бұрын
Were you able to find which one?
@Mike_44
Жыл бұрын
My led headlights were similar to these. But I actually found a way to not have to modify the rubber boot. Detach the plastic piece with the 3 legs that mounts the bulb onto the headlight, put the lightbulb through the rubber boot, then reattach the plastic piece with 3 legs back on the bulb. Flip the boot backwards, place the bulb and the retainer wire, then flip the boot forward to protect the bulb. No need to modify the rubber boot. 👍🏻
@Beacon_Offroad
Жыл бұрын
Good job. Have to try that next time.
@liammorley6727
3 жыл бұрын
Do you get any flashes by oncoming drivers because the headlights are blinding them?
@whocares4464
2 жыл бұрын
My thoughts exactly! So many of these are 💩
@MrAlboogie04
2 жыл бұрын
I have the same exact lights and yes they are really blinding. I've aimed them lower than normal and it seems to help with blinding other drivers. FYI 99 lifted 4RUNNER so aimed down is a must anyway
@hcoyhis
Жыл бұрын
@@MrAlboogie04put them in projection housings
@MonkeySpecs301
3 жыл бұрын
tbh, why you hating on the stock yellow, its goes with the generation imo, white doesn't match the car at all.
@Beacon_Offroad
3 жыл бұрын
Not so much the color as its the performance. Let's be honest here, its not bright enough. Led and Hid are much better.
@MonkeySpecs301
3 жыл бұрын
@@Beacon_Offroad its true stock isn't bright enough, but is there a stock color led you'd recommend thats also brighter?
@Beacon_Offroad
3 жыл бұрын
@@MonkeySpecs301 no there isn't. You can go to better halogen bulbs but there generally all bright white. At that point you may as well of upgraded.
@miklomorales4768
3 жыл бұрын
You need a led flasher Or resistor they have them at oreilys Or Auto zone
@Mxgul
8 ай бұрын
He sounds like RDJ 🦅
@mominalizada8831
Ай бұрын
Hi
@Smobro12
3 жыл бұрын
What lights did you use for the headlights? Also, how does the pattern look? I’ve had trouble getting a good lighting pattern.
@jasonbogdovitz7357
Жыл бұрын
You can’t get a good pattern with the non clear lenses you have to upgrade them to the 1999 and up headlights
@tonyortiz6881
2 жыл бұрын
DOT 5x7" 7x6" LED Headlight Hi/Lo Ring DRLHello seller these headlights are compatible with Toyota 4Runner 2000 2.7L
@lancesapitanan4650
11 ай бұрын
What front bumper is that, is that a sr5 bumper with limited fender flares?
@out-landishintheokanagan270
Жыл бұрын
Will the fan still do it's function of cooling the light with the rubber boot in the way? does the fan actually have to blow on the light, or does it go through the light? Thanks - I know nothing..
@brucewayne2773
3 жыл бұрын
Led upgrades H4 bulbs you can't make that rubber boot to fit, it's a bad design since moisture will make it's way in the housing
@campbellmarty36
Жыл бұрын
Great info !!!👍👍
@Beacon_Offroad
Жыл бұрын
be sure to check out my current video on lights. kzitem.info/news/bejne/u4KC3nxjZoOlbJg
@Mike_44
3 жыл бұрын
I need to do this to mine. The current stock setup absolutely sucks
@Browning263
2 жыл бұрын
Did the high beam worked after installing the led headlight? Mine did not. But it works if I install my old halogen light on one side and the led light on the other, the high beam worked no issues. Off course I did not leave it like that, I just wonder if it worked on your truck.
@askjrvbjkrfbvhjbdjf
10 ай бұрын
Most LEDs dont have a high beam function
@chavakano54
3 жыл бұрын
For your turn signals you need to add a resistor or LED Flasher
@Beacon_Offroad
3 жыл бұрын
Yes, thank you. makes perfect sense.
@renevillafuerte34
3 жыл бұрын
how come? what's it for?
@chavakano54
3 жыл бұрын
@@renevillafuerte34 standard flashers are designed to warn when they sense an open circuit (burnt filament of turn signal bulb) , and that's precisely what it senses when you install LED bulbs, so either you mimic the filaments resistance by adding a resistor or (what I did) you swap the flasher for an LED designed one.
@ovidiodegracia2942
Жыл бұрын
Demasiado rápido, no se puede lee
@christianmorales8893
2 жыл бұрын
For the turn signal ones you need to add a led resistor
@luevueee3004
2 жыл бұрын
I bought these and I think they blind other drivers? Do any other driver flashes their light at you because it’s too bright? I have had a couple driver flash me...
@dennisgalindez4802
2 жыл бұрын
Yes whenever they do that is to turn it off they can be extremely bright and people get migraines from it
@luevueee3004
2 жыл бұрын
@@dennisgalindez4802 I threw them away and got some different ones
@dennisgalindez4802
2 жыл бұрын
@@luevueee3004 but where you using the long light or regular ones
@willsteward8931
3 жыл бұрын
Thank you so much for your helpful videos man! What type did you get for the fog lights? Thanks.
@Beacon_Offroad
3 жыл бұрын
Thank you. I ended up with a generic H1 led bulb. Not super bright but they do the job. I have a bumper build coming soon and I'll be swapping them out.
@willsteward8931
3 жыл бұрын
@@Beacon_Offroad sweet thanks, and I can’t wait for that bumper build!
@hcoyhis
Жыл бұрын
Good job blinding everyone...
@Beacon_Offroad
Жыл бұрын
Absolutely, you should see how many more lights we've added. Blind everyone!
@hcoyhis
Жыл бұрын
@Beacon_Offroad or you could be an intelligent, respectful human being and run led lightbulbs through projection housings and end up with a better focused light that shines further down the road and doesn't blind people. Sorry you're instructing everyone how to be cheap and lazy with no regard for safety.
Пікірлер: 49