If I ever have a garage that I can do the stuff you do, it feels great knowing I have your rolodex of videos to go through when its time to upgrade. Way to make it look easy, even when I know its not! Keep it up!👍👍👍
@AutoEdits
3 жыл бұрын
Thank you a ton! Some of these are tougher than others and it's constant lesson of patience and perseverance.
@stevemartinism
3 жыл бұрын
Yea , I’m watching it again. 2 more months and I’ll have enough saved to take her to the shop. Woo goo!!
@AutoEdits
3 жыл бұрын
Congrats... I've been so happy with this setup!
@travislarson5192
3 жыл бұрын
I appreciate you really are doing this out of your garage. You probably have a slightly better set up than the average enthusiast, having a welder and plasma cutter, but you do an excellent job making this seem attainable by anyone. Thanks for the content!
@AutoEdits
3 жыл бұрын
I really dig hearing this level of appreciation... means a lot because I put a lot of effort into showing that average skill and ability can overcome most obstacles with some patience and perseverance. Thank you!
@The_John_Galt
3 жыл бұрын
Amazing!!!! Keep it up man!!! One of the best KZitem Jeep people out there!
@AutoEdits
3 жыл бұрын
Thanks! Will do!
@Shogunnur
3 жыл бұрын
Really the best. Excellent dialog, clear filming and instructions. Thanks for helping your fellow garage wrencher!
@attilamorvai
3 жыл бұрын
Really miss your desert/mountain trips...makes me feel like you are the only one on this planet at that moment...amazing!
@AutoEdits
3 жыл бұрын
You and me both! I so appreciate hearing this, thank you. I'm planning a little one in the Jeep as soon as I can.
@attilamorvai
3 жыл бұрын
@@AutoEdits thank you jason for your kind reply! Much love from sweden!!❤️❤️
@16minimonster16
3 жыл бұрын
Your excitement for your work is captivating! I love watching you! I love how you explain everything and make is understandable for anyone who watches! You show the whole install and I love that! You keep it light and fun! I just love watching your Jeep builds! You are my inspiration to build my Jeep one day! Thank you!
@AutoEdits
3 жыл бұрын
You're the best!
@stevea3936
3 жыл бұрын
Can’t go wrong with Metalcloak and their super quiet duroflex joint. 👍🏻
@AutoEdits
3 жыл бұрын
I agree... major highlight of the system for me!
@casamexico7838
3 жыл бұрын
Yep, I had rubicon express metal on metal, but they had a harsh ride and the joints needed greasing often. After two years with them 3 of the joints failed and so I went with Metalcload duroflex and what a difference, a smooth ride, excellent articulation, steers perfect and no greasing!
@scardaoni1
3 жыл бұрын
It’s been awesome to watch your jeep transform from the first video🙏🇨🇦That’s what my two door needs 👍love the string technique
@AutoEdits
3 жыл бұрын
You can do it!
@Manny92284
3 жыл бұрын
Dude, you make every install look so easy. Since you are taking subscribers recommendations, I usually give every Metalcloak part a good coat of clear to preserve that zinc gold longer prior to installation. Thanks for taking time to do this install.
@AutoEdits
3 жыл бұрын
That is a really good idea! Never would’ve thought of that. Thanks so much!
@vetguy2562
Жыл бұрын
Clearing that cool zinc would be a great idea 🤘
@donewhiskey
3 жыл бұрын
Pinto and Reed are pretty cool. It's those little moments. That new front articulation looks really good, at 30:13.
@AutoEdits
3 жыл бұрын
Thanks dude, I really appreciate how lucky I am. The test and tune will be a fun video to check how all this stuff really works under there!
@jimschmidt4089
3 жыл бұрын
Absolutely enjoy following your channel. I learn so much and respect your opinion on equipment. I'm about 2yrs behind you on your build.
@AutoEdits
3 жыл бұрын
Awesome, thank you! This is hard work and gets expensive fast so just make a plan and stay focused!!!
@FreAkLeFtY555
6 ай бұрын
Great installation ! Can't wait to get this one on my 2010 JK !
@AutoEdits
6 ай бұрын
I love it!
@mattbarrett41
3 жыл бұрын
That’s a beautiful kit! Designed for guys that have some skills, but not necessarily masters at Jeep craft. Thank you for this video
@AutoEdits
3 жыл бұрын
Thanks for watching!
@TheEscano99
3 жыл бұрын
I love my 4.5 lock n load suspension. I was on the fence with the game changer or lock n load, so far everything has been great. Keep up the videos
@AutoEdits
3 жыл бұрын
Thanks for sharing... how long have you been running yours?
@nicholasbaldwin1674
3 жыл бұрын
Your Jeep is top notch and the build is so clean! cant wait to see more. I love the time and effort you take in each step. we share a level of OCD
@AutoEdits
3 жыл бұрын
Thank you, glad you appreciate that stuff!
@stevemartinism
3 жыл бұрын
This was what I’ve been waiting for!! I have 1 more payment to go. Metalcloak is by far the best bang for your buck. 1st time ever seeing what I needed to see. My mind is made up. 4.5 lock n load all the way!🇺🇸
@AutoEdits
3 жыл бұрын
Howdy! I can't even explain how good this suspension system is. On the road and around town, the Jeep feels like driving a car and I haven't even begun to see how much more capable it is off road.
@davidyeats6609
3 жыл бұрын
It looks good so far. I’ll admit I’m a little jealous my friend. Definitely going to keep your Jeep more balanced and level 😎💪
@AutoEdits
3 жыл бұрын
Thanks! Yeah, I haven't even begun to discover how much better this is... stick around!
@brianrocco4301
3 жыл бұрын
I love this channel and I'm not even a Jeep guyl!!! Glad to see a new wave of videos!
@AutoEdits
3 жыл бұрын
Ha! I’m glad your here... nice to hear from ya!
@rocklanderoffroad
3 жыл бұрын
AHAHA!!!! man I was just looking to put 37s on my JKU and saw your FIRST video where you crammed them on with no lift.... I immediately had to jump to your channel and see whats going on.....4 years later your Jeep has GROWN!!!!! Im also looking at doing long arms with the 37s, but at the same time!!!
@AutoEdits
3 жыл бұрын
That's the smart way of doing it! I've been so happy with the long arm kit so far. Even just putting several hundreds of miles around Los Angeles it has proven to be better than I could've imagined. Off road improvement was the given but how great this thing is for everything else is amazing.
@rodburger7827
3 жыл бұрын
"Jeep'in Jason" You Sir are having way to much fun !!!
@AutoEdits
3 жыл бұрын
HA! Thanks so much!
@viczvapo
3 жыл бұрын
you are amazing. I’ll be doing this years to come. One of my goals, to do my own build, my self, maybe help from my dad, fam, and friends. Thanks for sharing.
@AutoEdits
3 жыл бұрын
thank you!
@PoisonSpyder038
3 жыл бұрын
Happy to see a install video for this kit I plan to do the lock and load on my JKU I have the mid arms and the DB3 brackets in the rear
@AutoEdits
3 жыл бұрын
Sweet!
@TyKnox
3 жыл бұрын
Another great video! The rig is looking great, Jason.
@AutoEdits
3 жыл бұрын
Thanks!
@chuckisbusy
3 жыл бұрын
Hey Jeepin Jason.. you look like your having too much fun! LOL. You keep taking your rig to the next level. My JK can’t keep up any more.. thanks a lot for taking us on the journey with you.
@AutoEdits
3 жыл бұрын
Howdy! It's call good dude! I'm glad your here for the fun!
@pascIAJ
3 жыл бұрын
Another jeep soon cant wait!
@jp2246
3 жыл бұрын
Yes, have done the short arm lifted TJ thing...
@AutoEdits
3 жыл бұрын
RIGHT!?!!!!!
@socomt5
3 жыл бұрын
Excellent str8 forward video AE! SOOOOOOOenvious of your suspension system. Looks absolutely amazing. And is definitely a head turner for how it looks. You have a great holiday season. And Trail Oooooon!
@AutoEdits
3 жыл бұрын
Thanks! 👍 Happy Holidays to you as well!
@bubbie3533
3 жыл бұрын
YES!!! A new video Jason. Thanks for uploading dude.
@AutoEdits
3 жыл бұрын
You bet! Thank so much!!!!!!!
@bubbie3533
3 жыл бұрын
@@AutoEdits I can't wait to see the new content Jason. 👍👍👍
@danabryan5358
3 жыл бұрын
Great video as usual - you made install look easy - love metal cloak products!! Looking forward to Dana-60 install.
@AutoEdits
3 жыл бұрын
Thanks 👍
@johnboudreau5135
3 жыл бұрын
Another fantastic instructional video. Great work. Love the Jeep. Keep the stuff coming.
@AutoEdits
3 жыл бұрын
Thanks, will do!
@BADD400
3 жыл бұрын
Great video. Jeep looks fantastic. Can’t wait for the test and tune.
@AutoEdits
3 жыл бұрын
You and me both!
@kovan5155
3 жыл бұрын
Dude been waiting for this video and it didn’t disappoint. Great video. Awesome jeep!
@AutoEdits
3 жыл бұрын
Glad you liked it!! Thanks!
@BigpoppaKC
3 жыл бұрын
sweet video, I no longer have my JKU Rubicon but I enjoy your videos. I appreciate the alignment tip, which I'll use now for my Polaris RZR, thanks!
@AutoEdits
3 жыл бұрын
This right here... THANK YOU!
@attnielthomas7856
3 жыл бұрын
Video approved (thumbs up) for Pinto sightings.
@AutoEdits
3 жыл бұрын
❤️🐕
@macmurfy2jka
3 жыл бұрын
Thanks, definitely looking at metalcloak for the JKUR’s impending lift.
@AutoEdits
3 жыл бұрын
You'll be happy... this thing drives so good now!
@austinbob7291
3 жыл бұрын
Man I have seen this Jeep from start to now very impressed keep it up 👍
@AutoEdits
3 жыл бұрын
Thanks, will do!
@nickhermo2936
3 жыл бұрын
Another great video. Just started but already know and dropped the like!
@AutoEdits
3 жыл бұрын
DUUUUUUDE.... Much appreciated!
@chikasha3297
3 жыл бұрын
Great video mr edits ! Thanks for sharing your empirical knowledge !
@AutoEdits
3 жыл бұрын
Glad you enjoyed it!
@tomb9953
3 жыл бұрын
Great video as always. Glad the string method worked for you.
@AutoEdits
3 жыл бұрын
Thanks dude!
@cardenasrc51
3 жыл бұрын
Once you do the Hydroassist you’ll wonder how you used to live without it. 😅 by far the best upgrade I’ve ever invested in!
@AutoEdits
3 жыл бұрын
I keep hearing that... I'm going to install the PSC kit on my buddy Joe's Jeep and see how I like it and then may be saying "yep you were right!"
@PaulKaiser42
3 жыл бұрын
Great video as always!!!! The jk looks great and it sounds like metal cloak has it pretty dialed 👍🏻👍🏻
@AutoEdits
3 жыл бұрын
I'm beyond impressed so far... love that feeling when it's better than expected!
@CThib-fc2nr
3 жыл бұрын
I went to sub after you located that hole THEN drilled it, the right way. Realized I was already subbed. Your attention to detail is impressive. Good work brother!
@AutoEdits
3 жыл бұрын
Awesome, thank you!
@viboldsok
3 жыл бұрын
You create some great content and it gives me hope that i can do some of the work on my own for my future jeep build!
@AutoEdits
3 жыл бұрын
You can do it!
@scooba.steve.is.everything234
3 жыл бұрын
Nice job Jason again!!! Not too many reviews on the lock and load. Glad to see one. Tj build possibly??
@AutoEdits
3 жыл бұрын
No TJ for me, even though I love the looks of those... I'm sticking with my JK for a bit longer!
@JahkiBoy
3 жыл бұрын
You sir have a new subscriber and should be sponsored in this video.
@AutoEdits
3 жыл бұрын
Howdy and thank you!
@kalevassallo47
3 жыл бұрын
Just the video I was waiting for!
@AutoEdits
3 жыл бұрын
So glad to hear that!
@kalevassallo47
3 жыл бұрын
Keep up the amazing work! Fantastic videos!
@jman4995
3 жыл бұрын
Great video Thank you for the content. I reviewed and read the instruction for this kit for my TJ and it requires a little more welding according to the instructions. Thanks again for the detail.
@AutoEdits
3 жыл бұрын
You're welcome!
@brucenix2037
3 жыл бұрын
Its great to watch and learn from your KZitem and watch you do it yourself is a great help to others. I have always enjoyed working on my own 88YJ and now we bought a 2017 JK Unlimited and have started on it. No lift yet. Want to make sure it still fits in standard garage.
@AutoEdits
3 жыл бұрын
This would totally fit if I had my hardtop or the Bestop Trektop on there. The Supertop I’m running now sticks up an extra 3”
@brucenix2037
3 жыл бұрын
@@AutoEdits thanks for the reply. What is the tire size you are running and back spacing?
@AutoEdits
3 жыл бұрын
kzitem.info/news/bejne/t3-HtXpsp2NelZw
@mzk6550
3 жыл бұрын
Man... I just love your videos! Thanks!😃💙💙👊🏾
@AutoEdits
3 жыл бұрын
Glad you like them! Thanks so much for being here!
@beachboy4928
3 жыл бұрын
Great job Jason!
@AutoEdits
3 жыл бұрын
Thanks!
@NarleyAdventures
2 жыл бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻, I have be running the 2.5 Metalcloak Game changer lift on a 2012 2dr JKR for the last 8 yrs and love it! Loading it down with overland "gear" I had to put new 4.5 springs in the back where the majority of the load was and 3.5 in the front to level it out . So this was pretty interesting!
@AutoEdits
2 жыл бұрын
Right on!
@NarleyAdventures
2 жыл бұрын
@@AutoEdits I'm a 1 1/2 yrs late on my comment I noticed. LOL.
@AutoEdits
2 жыл бұрын
@@NarleyAdventures There is no "late" here... glad you watched and took a moment to comment!
@4WDTrek
3 жыл бұрын
Love how you explain stuff on your videos! You inspire me to do the same for my own channel! As well as my own builds!
@AutoEdits
3 жыл бұрын
Awesome! Thank you!
@timjmartin
3 жыл бұрын
Very well done content sir!!!! Good looking Jeep also.
@AutoEdits
3 жыл бұрын
Much appreciated!
@kleimbach77
3 жыл бұрын
this vid was awesome as always you do work like I would do it! I don't have a Jeep but I love your channel! I wish there was,a channel like this for Ford F150s like mine!
@AutoEdits
3 жыл бұрын
Thank you!
@rodneyvenzon7462
3 жыл бұрын
awesome way to get long arms without the hack job it usually takes! definitely going to look into this methode. Thanks
@AutoEdits
3 жыл бұрын
I was impressed... just wait until the first real off road adventure!!!
@randywright7680
3 жыл бұрын
love the vids! keep'em coming!
@AutoEdits
3 жыл бұрын
Thanks! Will do!
@derekabbott5856
3 жыл бұрын
Ok great Just installed my skid plates from metalcloak Just didn't know if it worked with the long arm kit for me in the future Good to know I can have both Thanks
@AutoEdits
3 жыл бұрын
Seriously... those metalcloak skids are such a great system... congrats on getting the best! Like I said before... underrated awesomeness!
@anakinluke100
3 жыл бұрын
Whenever you upload, I get super jealous and just want to buy parts to wrench on my Jeep! Love the vids btw
@AutoEdits
3 жыл бұрын
Sorry not sorry! HA... thanks for watching!
@JoseOrtiz_1416
3 жыл бұрын
Finally ! I have been waiting i just knew this was your next step ! I cant believe the only welding needed is those spacers correct ? The welding is what originally scared me away but if that's the only welding I'm pulling the trigger
@AutoEdits
3 жыл бұрын
How did you know!!!??? LOL I was totally amazed at how accessible this kit is to the average mechanic (like me)!
@jimgavin1799
3 жыл бұрын
Just what a friend told me. I’ve been waiting for someone credible. Guess I should just call Metalcloak
@AutoEdits
3 жыл бұрын
It's going to be fine... I'm not worried at all and don't actually see anything needing to be trimmed but shouldn't be a big deal considering what I just went through to install the lift.
@jimgavin1799
3 жыл бұрын
@@AutoEdits awesome, I’m also curious what you decide on a rear housing/axle combination. Sixties would be nice but I just bought new beadlocks, 5X5. I’ll definitely be following along as usual
@tylerspagnoli7071
2 жыл бұрын
You’re a G! Clean work man, appreciate this video
@AutoEdits
2 жыл бұрын
Thank you!
@ryantepley3662
3 жыл бұрын
Super 44 in the front, Dana 60 coming in the rear, long arm kit and 4.5” of lift = Jeepin Jason movin’ to 40’s.
@AutoEdits
3 жыл бұрын
It's got me thinking for sure but I promised myself I'd stay here for a bit longer...LOL
@kevingraham8249
3 жыл бұрын
is a super 44 wider than the dana 44?
@sandralutz-rodriguez2864
2 жыл бұрын
I am waaaaayyyyyy below an average weekend mechanic and I love your videos. always very informative and I learn something new. We are gonna get long arms! Say hi to Pinto please!
@AutoEdits
2 жыл бұрын
Great to hear! Congrats on the suspension and I'll give Pinto some pats from ya!
@sandralutz-rodriguez2864
2 жыл бұрын
@@AutoEdits it'll be the next mod, been contemplating and your video confirmed it!
@reusetechpctech
3 жыл бұрын
Man...! I love these videos. Inspires me to fix up my 1995 jeep. Thanks man. 👍
@AutoEdits
3 жыл бұрын
Right on! This is the stuff I love to hear!
@johncourtneyscott2757
Жыл бұрын
Looks great!! You did a great job
@AutoEdits
Жыл бұрын
Thank you!! 😊
@nickcarlson8047
3 жыл бұрын
SWEET I love this build
@AutoEdits
3 жыл бұрын
Thanks!
@jesusglopez8430
3 жыл бұрын
Excellent beautiful really nice and very clean job well done Thanks.
@AutoEdits
3 жыл бұрын
Thank you! Cheers!
@patan77
3 жыл бұрын
Always love your videos my friend! Always motivate me to throw more money I don't have in my jeep 😜👍👍👍
@AutoEdits
3 жыл бұрын
Ha! Sorry not sorry! Enjoy the tinkering!
@patan77
3 жыл бұрын
@@AutoEdits yes my friend looking forward to add some cool stuff to my old 07 soon 😉. Great video love the new suspension feel. You also make it with some of the best taste in the KZitem!
@BattlePhrog165
3 жыл бұрын
Definitely interested in seeing how these radius arms perform, particularly compared to parallel arms.
@AutoEdits
3 жыл бұрын
Definitely not as high tech as 4 link long arms but WAY easier to install and WAY better than the mid length arms. I was legit "over the moon" happy on that test drive part of the video because the thing felt amazing already so I know with some tweaking it's going anywhere I aim it!
@TBizzell68
2 жыл бұрын
I just wanted to express a serious safety concern, the pedestal fan in your garage doesn’t have a shroud and you could experience a nasty bruise…obviously I’m joking, I love the channel, unassuming and to the point good stuff, and Pinto. I’m glad I found you.
@AutoEdits
2 жыл бұрын
Thanks!!!
@sarg492
3 жыл бұрын
Great video Jason, I got to get a pair of long arms for my keep now, damn it more $$$$
@AutoEdits
3 жыл бұрын
Ha! They are pretty dang good... I'm doing another set on my friends Jeep now!
@PrinceOfEville
3 жыл бұрын
That headlamp is amazing, unfortunately I gave them all away 😂 The big larry pro is amazing for projects too!
@AutoEdits
3 жыл бұрын
I really love that thing!
@Camp4lo
3 жыл бұрын
Nice work bud. I got some new trails in mind for that thing now! And there’s tacos too
@AutoEdits
3 жыл бұрын
Oh heck yeah dude! I keep watching those dates you are posting waiting to pounce! 😂
@jesusrivera4769
3 жыл бұрын
Awesome video jason.
@AutoEdits
3 жыл бұрын
Thanks 👍
@alfonzovuolo5568
7 ай бұрын
GREAT VIDEO!
@AutoEdits
7 ай бұрын
Thanks!
@rq6775
2 жыл бұрын
Wow I didn’t notice how big those jack stands were until you mentioned them.
@AutoEdits
2 жыл бұрын
Yeah, and they were kinda pricey.
@stevemartinism
2 жыл бұрын
Can’t believe I’m posting again. BUT…….I know HAVE my 4.5 Lock n Load on MY JK. It goes without saying……this has been a life changing event for my Jeep. Rides like a tank. Had #musiccity4x4 install this. Highly recommend this!!! It’s my Jeep only better!!🇺🇸
@AutoEdits
2 жыл бұрын
Glad you like yours as well!
@kevinpickett7497
3 жыл бұрын
Your a mad man ha ha! In your video looked like the rear driver brake line was close to your tire, I'm sure your on it! Just In case you didn't see it I threw it out there...I got to say I learn some thing new in every video thank you so much for that happy holidays man!
@AutoEdits
3 жыл бұрын
I appreciate the spot! thanks so much and have a safe and happy holiday as well!
@JustNobodyButME
3 жыл бұрын
bolt on long arm kit?! YES PLEASE!!! Thanks for all the great videos. I kinda feel bad because i like that you're still kind of a small channel and it feels more personal and i like reading/seeing you respond to comments but i know you should have 100 times more subs and i should tell everyone about you but then there would be more people here and it wouldnt feel the same way. It's a real moral dilemma. :))
@AutoEdits
3 жыл бұрын
HA! This is a funny dilemma... I'm just happy and thankful to be able to create the content at this point and interactions like this are what it's all about. Thanks for being here!
@felipao007i
3 жыл бұрын
and the foo fighters video on the back! nice work man!
@AutoEdits
3 жыл бұрын
Great spot!!! Yeah, they are pretty much one of my favorites.
@anyoneanygun210
3 жыл бұрын
Super clean install! Now come to San Antonio and help with my build :)
@AutoEdits
3 жыл бұрын
Maybe one day!
@jeffb1375
Жыл бұрын
Great video! I’ve watched this video at least 3 or 4 times. You do a great job explaining the installation. I have the same kit still in boxes, waiting for a long weekend to install. How long brake lines did you go with?
@AutoEdits
Жыл бұрын
Awesome, thank you! I don't remember off hand but the longer of the options on the metalcloak site and they work great. Take your time and have fun with the install... remember to measure before and after!
@Strizzle81
3 жыл бұрын
Awesome video
@AutoEdits
3 жыл бұрын
Thanks!
@joeporter1261
3 жыл бұрын
Love the progress man! I was just wondering what length you started at on your rear arms with the DB3 brackets...I am really thinking about doing this.
@AutoEdits
3 жыл бұрын
20" on the lower and 17.5" on the upper but just installed this on my buddies jeep and had to tweak it a little.
@davidsandoval9096
3 жыл бұрын
Such a great video and lots of info. Keep them coming!!! Also I see u used semi-gloss paint on the frame. What brand did u use cause it looked like factory.
@AutoEdits
3 жыл бұрын
Thanks! In this video I used the Duplicor semi-gloss black... works pretty good but I'm going to try Steel it products soon and see if they last longer.
@LTUSATV
3 жыл бұрын
@1:50 that's the control arms that make that "ping".... (I thought it was my doorbell).
@AutoEdits
3 жыл бұрын
LOL
@LTUSATV
3 жыл бұрын
@@AutoEdits you are as anal as I am about painting stuff before installing over it and making sure holes are drilled perfectly... I get anxiety when I watch people install parts over dried up mud or paint stuff without cleaning it with thinner first and priming it. Are you a virgo too? Love the direction your Jeep has taken and look forward to that other build you mentioned.
@djtoo7
3 жыл бұрын
Cool job u may want to relocate the rear sway bar back a bit move the bracket back front hole to back hole and drill new one for rear and get a insert for the back bolt much smoother no rubbing !
@AutoEdits
3 жыл бұрын
Never thought about that, thanks!
@EpicDynasty7
3 жыл бұрын
I pressed like so fast after that joke at the beginning 😂😂😂
@AutoEdits
3 жыл бұрын
Thank you so much... believe it or not... someone was already offended by that.
@leskobrandon538
3 жыл бұрын
@@AutoEdits people.. Pffft
@Rick-4552
3 жыл бұрын
I like your toolbox buddy trick on the frame, but here inWest Virginia we have to use Fluid Film or we wont have a frame after a few winters 🤣
@AutoEdits
3 жыл бұрын
I've heard of that stuff... haven't tried it yet. I have a healthy appreciation for my west coast lifestyle being easy on chassis parts!
@joannewhilde7359
3 жыл бұрын
Great video Jason!! Can I be cheeky and see if I could blag an Auto Edits sticker for my car? Im a big fan and this gal loves your upgrades and Pinto. You aint too bad yourself! love Joanne x
@AutoEdits
3 жыл бұрын
Thanks so much!!! I don't have any stickers yet... guess I should make some!!! You are the best! Pats for Pinto specially from you!
@joeyh7796
3 жыл бұрын
27:14 that downshift!👌🏻lol
@AutoEdits
3 жыл бұрын
Glad you appreciated that!
@chuckisbusy
3 жыл бұрын
I love my flowmaster sound as well.
@highlanderhigh9881
Жыл бұрын
Hey Jason, great video's. You already saved me a lot of time and $$$ with this one. Are you still running 37s ? Thanks for all of your hard work.
@AutoEdits
Жыл бұрын
Thanks! Yes I'm back on 37's kzitem.info/news/bejne/rYlsyXqHnpF0iKg
@yikes_dian3392
3 жыл бұрын
Well after watching your video about six times, I decided to tackle this one, so I did but I should had watch the video ten times, few things here and there, took me a total of 31 hours to complete and there was plenty of ddakjffgkdfakjksfkj but all set and done. thanks for your videos, always looking forward to see what are you coming up with next.
@AutoEdits
3 жыл бұрын
Awesome to hear! Thanks for sharing!
@llewellyntoth5505
3 жыл бұрын
So envious of the underside of California cars
@AutoEdits
3 жыл бұрын
Yeah, I totally appreciate it.
@DEANFREEMAN429924
3 жыл бұрын
I love my 4.5 lock n load system on my 2 door. I seem to have issues with my front arms tweaking in/out so they aren’t always level. Curious to see if you have the same issues in the future and your fix to that.
@AutoEdits
3 жыл бұрын
Interesting... I’ll keep an eye out for that.
@ericthatankn8704
3 жыл бұрын
The string trick is how we aligned hmmwvs in the Army works well
@AutoEdits
3 жыл бұрын
Nice!
@4WDTrek
3 жыл бұрын
I never thought of doing that! I should try and make that work for my own videos!
@RubiconUnlimited
3 жыл бұрын
Man oh man, your jeep is quickly becoming my favourite out there! Whatcha doing with those "old" mid arms? 👀
@AutoEdits
3 жыл бұрын
LOL! I'm going to see what I need for my buddies jeep and then figure out what to do with them!
@RubiconUnlimited
3 жыл бұрын
@@AutoEdits sounds good brother! Can wait to see that new build
@mikehoffman3690
3 жыл бұрын
Great mod.
@AutoEdits
3 жыл бұрын
Better than expected so far!
@johnroche5104
3 жыл бұрын
I learn so much from your vids, I feel like I owe you money! But I don’t have any! ☹️ One day I’m gonna buy you a beer though! Promise! 😉
@AutoEdits
3 жыл бұрын
HA! Hey, you watched the video and interact in a great way here... That is all I need so thank you!
@tuggerthegriz5484
3 жыл бұрын
Anyone else want this guy as there best friend ? I sure do
@4WDTrek
3 жыл бұрын
I just want this guy on my own channel! Teach me his ways!
@tuggerthegriz5484
3 жыл бұрын
@@4WDTrek great little channel brother. I watched your walker valley video, I’ll be back for more in a bit. Your production quality is really good on the video.
@4WDTrek
3 жыл бұрын
@@tuggerthegriz5484 Thank you! I am still in the learning process on it all, so I appreciate the compliment!
@tuggerthegriz5484
3 жыл бұрын
@@4WDTrek yeah the voice overs sound weird but the rest was beautifully done. Keep killing it brother and I am sure it will all come together for you.
@4WDTrek
3 жыл бұрын
@@tuggerthegriz5484 thanks! I'm trying to be better at remembering to talk while on the trail. Its hard to remember. Voice overs are definitely a learning curve. Thank you!
Пікірлер: 509