This is our van that Stuart and his team converted. To say we are pleased is a complete understatement. As you'll see, they did a fantastic job and we love the finished article. Our kids love sleeping in their den underneath and we cant wait to explore and enjoy the van more this year. We couldnt reccomend these guys enough if you are looking for a conversion. Thanks again! The Rowland Family!
@TrishasMotorhomeMadness
14 күн бұрын
Safe and happy travels guys ❤ have the best adventures
@alisongoodger1155
16 күн бұрын
Fab job Stu and the team. Just a small thing if you put round head screws on your cheeky plaque rather than countersunk it would look perfect. Still a fab job. But you are after feedback.
@joline2730
9 күн бұрын
Congrats on NOT covering up the over-cab shelf with a stoopid tiny opening 👍 I have had two Transits with bigger shelves than this van, completely open but with a small lip at front, and over 8 years I never had anything fall down. You need small lips at front of all shelves to stop stuff falling out when you open the doors, and on that cubby hole too. Still cannot understand the groove under the worktop 🤔🤔
@gilbery007
10 күн бұрын
Great, simple build with maximum attention to detail! We have the Vauxhall Movano 2019 plate and have the same issue on sliding door :( The door has a main seal like other doors but the sliding door also has a P seal that runs along the top of the door. So far have tried adjusting the door to bring closer to van but still leaking in top corners in heavy rain. Sorry I cant help with this but seems to be a common issue on these vans sadly.
@TrishasMotorhomeMadness
14 күн бұрын
Loving the wood effect you do a fantastic job your finish is always amazing 😊
@chrisfinn7907
16 күн бұрын
Another first class build by the Vanology crew and a good one for Shane's first: first word of the customer when he opened the sliding door: 'Wow'..says it all really..he also said what I've always said which is the attention to detail which you have in buckets.. Compared to some of the other recent ones, a fairly simple conversion, however simple done well is the way to go for me.. Hope that nagging water inlet by the sliding door gets sorted...sure it will.. See you on the next one..👍🤠
@welshieonwheels
15 күн бұрын
Sorry 2 comment mike here🤣 , just saying you can also get a Fiamma tripod for that table, so you could use it out side they are well made but around the £55 mark . You probably know already 👍👍👍🏴🇬🇧🇨🇦🦢
@denisesmith7201
16 күн бұрын
Great vlog showing a fantastic conversion. You’ve done it again 👍👍👍
@VanologyConversions
16 күн бұрын
Thank you 💙🚐
@neilgeorge8952
16 күн бұрын
Nice work
@user-hg3ez1kz6x
17 күн бұрын
Nice build chaps .
@VanologyConversions
16 күн бұрын
Thanks mate 👊🏻🚐
@ian_morg
17 күн бұрын
Fair play that looks really nice! Loving the details on your builds 😍😎👍🏻
@VanologyConversions
16 күн бұрын
Thanks mate appreciate it 👊🏻🚐
@UKvet246
16 күн бұрын
Very impressed with the sliding panel protecting the electrics, I'm going to do the same but use two panels on two slides.
@VanologyConversions
Сағат бұрын
Was a good work around for a last minute add on 👊🏻🚐
@sashadog58
16 күн бұрын
Another one bites tge dust,great job as usual
@stevebennett6727
17 күн бұрын
Fiamma sell an above sliding door water divererter strip, used a lot to stop the rain running down when you open the slider. May be worth a try. I had one on my Ducato self build. Some have used some tile corner trim stuck on to divert the water too. 👍🏼🏴
@VanologyConversions
17 күн бұрын
Thanks for the advice mate 👊🏻🚐
@sallylock6077
17 күн бұрын
Also used on the citroen relay we built due to same problem
@trevormegson7583
17 күн бұрын
Made my day when this popped up. Great build mate.
@VanologyConversions
17 күн бұрын
Thanks Trevor, our next video is another van tour but after that we are going back to our roots showing the work and why we do what we do 👊🏻
@wetchels5335
16 күн бұрын
Another great build to add to your list, well done 🙂
@VanologyConversions
16 күн бұрын
Thanks guys 💙
@lorraineowen7978
17 күн бұрын
Gosh it's incredible what you can create in a van space for a family of 5. It looks so beautiful, well done guys. 😊👌
@VanologyConversions
17 күн бұрын
Thanks Lorraine 💙🚐
@welshieonwheels
15 күн бұрын
Excellent work , love it learning a lot . I used aluminium corner with a recess for led strip which came with the corner from clear cut conversions in Barnstable. The led strips were taking over 2amp at 12volt so I bought a few inline dimmers, which reduced the current to well under an amp and took the edge off the brightness 🔆 I.E less disco more camper van 🤣 thank you both well done and good luck from the Bont 👍👍👍🏴🇬🇧🇨🇦🦢
@garywhitaker5540
16 күн бұрын
Another Cracking Build Guys .
@VanologyConversions
Сағат бұрын
Thanks mate 👊🏻🚐
@garyp1881
16 күн бұрын
Another Lovely build pal well done ❤
@VanologyConversions
Сағат бұрын
Thanks bud 👊🏻🚐
@denisecafferky2248
16 күн бұрын
Great use of space considering the massive bed. Top notch as always 🎉
@VanologyConversions
Сағат бұрын
Thank you, the bed was a big one for sure 👊🏻🚐
@sallyohalloran6650
16 күн бұрын
Beautiful job...again! Xx
@willjonesfitness.8538
16 күн бұрын
Looks awesome
@AndrewBurridge-ns1bi
16 күн бұрын
Great build 👏
@VanologyConversions
16 күн бұрын
Thanks Andrew 👍🏻
@johnallan5821
17 күн бұрын
Brilliant Brilliant job pal love it❤
@VanologyConversions
16 күн бұрын
Thanks mate appreciate it 👊🏻
@craigpalmer347
17 күн бұрын
Great build that mate 👍👍👌👊🏻
@VanologyConversions
17 күн бұрын
Thanks mate 👊🏻🚐
@dalison1
16 күн бұрын
Love it❤
@davekitchener9092
16 күн бұрын
Wow mate another awesome van . Love it well done 👏 ✔️ 👍
@VanologyConversions
Сағат бұрын
Thanks mate 👊🏻🚐
@Touringwiththemarshalls
16 күн бұрын
Love a good van tour! Keep up the good work guys…. (Patiently waiting for a ruck vlog 😍)
@VanologyConversions
16 күн бұрын
Thanks guys 👍🏻🚐 we will have more videos for our main channel, we decided not to put videos out for the sake of it so when we travel they will be back 👊🏻🚐
@bradlock76
17 күн бұрын
I ❤ watching this channel.. I didn't realise you could run the DC - DC charger live feed cable that long from front of the van to where you have it located at the back., I'd love to know how you've achieved that. Great job folks, the builds are getting better & better.. 😎
@VanologyConversions
17 күн бұрын
Thanks mate, any of the cables can be run the full length of the van but you have to take voltage drop into consideration based on the length and adjust the cable size to suit 👊🏻🚐
@bradlock76
17 күн бұрын
@@VanologyConversions 😊 this is Brilliant Stu, you've given me some great ideas to adapt to my own Citroen Relay build. I just about to rip the bulkhead out to start this actual wiring process, I know you are a busy bee.. But did you run the cables inside the van or run those outside underneath?
@VanologyConversions
17 күн бұрын
On this van we run them under the van inside a conduit and clipped 👍🏻
@auntyree5131
17 күн бұрын
great job again only thing i would change is the counter top with the sink in would round all the corners off with it being a tight space i can see people getting some nice bruises did you say he had kids if they are little the counter top is at eye level ouch
@VanologyConversions
17 күн бұрын
Thanks mate 👊🏻 the square corner has had the sharpness taken out of it
@stephentravis3082
17 күн бұрын
.ive got the same problem on my boxer so i fitted a drip strip on the top edge no problem yet
@VanologyConversions
17 күн бұрын
It’s good to know it prevents it but would love to know why the seal isn’t working, we even checked for damage in the header area but can’t see anything
@darrenj3267
16 күн бұрын
Like many others have, i have fitted a drip strip above the door. I used a B and Q 9mm plastic tile end trim quadrant trimmed down on the flat edge and sikaflexed up. That stops a lot of rain getting to the seal. But i also wonder if the seals are genuine oem as i looked at some cheaper after market ones for my van and they werent quite the same as the original ones
@VanologyConversions
16 күн бұрын
The strip the customer sent to us was an aftermarket seal so did think this may not have helped the situation.
@davidhale4830
16 күн бұрын
Great van and video,a question please,is it possible to fit extension pods to the back doors? Thanks
@garycurtis1539
16 күн бұрын
Hi, Ball park figure how much would this conversion cost minus the van cheers. Keep up the good content.🙂
@VanologyConversions
Сағат бұрын
Thanks mate, budget on this one was about £15k all in 👍🏻🚐
@UKvet246
16 күн бұрын
Very smart
@VanologyConversions
Сағат бұрын
Thanks bud 👊🏻🚐
@kimholt3817
16 күн бұрын
i had exactly the same problem with the leaky door on my citreon Relay. adjusted the door put new seal on etc. still leaked rang Citreon they said it was probably a bow in the door which is nonsense it’s a design fault they don’t want to admit that . 😮
@chrisdoyle1921
16 күн бұрын
What seats were used in the back?
@michaelh8002
17 күн бұрын
I had the same issue with my boxer, put a sealing strip above the door and that has solved it
@VanologyConversions
17 күн бұрын
It’s a strange one isn’t it as the door is tight against a brand new seal and still leaks, even tried silicone spray on the seal
@terrydewdney207
16 күн бұрын
Where do you get your fridges from? I need a small fridge.
@VanologyConversions
Сағат бұрын
Jackson’s leisure mate 👍🏻🚐
@Rob.1340
16 күн бұрын
👍🚐😎
@danharvey9262
16 күн бұрын
Had the same issue with my boxer and Peugeot told me the door was bowed and need a new door to fix the issue
@VanologyConversions
Сағат бұрын
We did check the door and all around the frame and everything looks good, we put it down to a non genuine seal
Пікірлер: 71