Thank you for mentioning my battery card. I'm glad that you find it useful. Thanks to your video the card got a lot of new stars on github which motivated me to speed up next release 😊 Now you will be able to show info from battery notes integration in more places than before. I plan to add some new features in the card specifically for battery notes integration in the nearest future. BTW I have linked your video in the latest release notes and on the community forum 😊
@BeardedTinker
8 ай бұрын
That's so good to hear! Glad your card got more exposure as it's really awesome!!! Looking forward to trying all of the updates!
@iainhay2823
8 ай бұрын
Love the battery notes one. thermal comfort I already use to let meywife know if her car is likely to need de-icing. The kitchen floors lights go red for bad traffic, blue for frost or pulse from one to the other for both when she walks into the kitchen in the morning. She than has an automation to scrape the ice....she shouts at me to get up and scrape her windscreen for her. Not so fond of that automation
@BeardedTinker
8 ай бұрын
This is such a great idea! Need to to something similar! We usually have just verbal notifications, but they are getting fed up with it - this will be nice change.
@iainhay2823
8 ай бұрын
@@BeardedTinker thanks! It works really nicely, the time to work automation is just based on the Waze sensor. It’s so much more noticeable as all the announcements get tuned out a bit!
@cros13
7 ай бұрын
@@iainhay2823 Time to start saving for an EV with remote defrost? :)
@iainhay2823
7 ай бұрын
@@cros13 fortunately they just added a new bus route which replaces the need to use a car anyway! Didn’t expect that I must say, the UK is not blessed with good public transport unless you are in London.
@kksligh
7 ай бұрын
Battery notes should be core functionality - love it
@BeardedTinker
7 ай бұрын
We can only hope, one day... :)
@PetervanHofwegen
8 ай бұрын
Of the termal comfort component the absolute (instead of relative) humidity sensor can be very usefull. I use it for to monitor the drying of my laundry. Since with the exact same amount of moisture in the air the relative humidity will drop when the same air warms up and visa versa. Also comparing absolute humidity of outside with the absolute humidity where my laundry is drying can decide whether it is usefull to open or close the window. (and when closed turn on the dehumidifier instead) This has saved me soooooooo much money and the WAF is through the roof!
@BeardedTinker
8 ай бұрын
Such a great idea! Need to do something similar. Thanks for sharing this!!!!
@briankloc
8 ай бұрын
I’ve been watching this whole series of videos and usually install at least two per video. Thank you.
@BeardedTinker
8 ай бұрын
Great to hear! Thank you!
@Claudiu.
8 ай бұрын
Great recommendations again. Thank you. The thermal comfort one reminds me that I wanted to try the mold detection integration :)
@BeardedTinker
8 ай бұрын
Did few videos on that - but need to check again data used for sensors as I've done some changes to heating in those rooms and it may have impacted math.
@sevagjb
8 ай бұрын
very nice series video to HACS, i like that your work is very appreciated
@BeardedTinker
8 ай бұрын
Glad you enjoy it! Thank you!!!
@timtaler8439
8 ай бұрын
Thanks. I appreciate that you take the time to dig out some gems.
@BeardedTinker
8 ай бұрын
Thanks for watching and comment!!
@milnovako
8 ай бұрын
Extra video, jos jednom svaka cast !
@BeardedTinker
8 ай бұрын
Hvala puno 😉
@makeitworktech
8 ай бұрын
Great video! Battery info is a must!
@BeardedTinker
8 ай бұрын
THANK YOU AARON!!! (Shouting because I missed it and relaying late! :)
@PierreLeroy76620
8 ай бұрын
I really should watch more often your content always nice things !
@BeardedTinker
8 ай бұрын
I appreciate that! Thank you!!!
@janogrodnik8663
8 ай бұрын
Thermal Comfort is useful. Thanks for the tip.
@BeardedTinker
8 ай бұрын
Glad you like it!
@adifoto6362
8 ай бұрын
O waw so many goodies, thanks for the video. Now i have something to do on the holiday 😀.
@BeardedTinker
8 ай бұрын
Happy holidays and thanks for comment Adi!!!!
@adifoto6362
8 ай бұрын
Happy holidays to you to @@BeardedTinker
@ApertureApex
8 ай бұрын
10/10 video as usual. Many thanks! 😁
@BeardedTinker
8 ай бұрын
Glad you enjoyed it! Thanks for comment and for watching it!!!
@michaelthompson657
8 ай бұрын
Loving these hacs videos!
@BeardedTinker
8 ай бұрын
Glad you like them! Thank you!!!
@michaelthompson657
8 ай бұрын
@@BeardedTinker no problem, anytime! Keep it up 👍🏻
@erikwebr1342
8 ай бұрын
Good tips! Thanks.
@BeardedTinker
8 ай бұрын
Glad it was interesting!
@reimarkupper4675
8 ай бұрын
Dober dan, thank you again for an informative and well structured video. For christmas is about it come, may I add a wish to my wishlist. I would love to see a "How to build a (or your) dashboard" including the code to rebuild it by the viewer. Currently I snip out some code of your videos, but with your experience, i would love to see how you setup a complete new dashboard for beginner and experts (you see, maybe this will be a series of videos) ;) Just a little wish for 2024. If not possible or too much work: No problem. Hvala vam na vašem trudu Reimar
@BeardedTinker
8 ай бұрын
Thank you!!! :) Well, that will be a tough one, but I'll tackle it next year. My own dashboards in main setup are unfortunately, not as good as I wish they would be. Never have enough time to play with them.
@ronm6585
8 ай бұрын
Thanks B.T. Merry Christmas to you and your family. 👍🏻❄🎅🏻🎄😊
@BeardedTinker
8 ай бұрын
Thank you too Ron and all the best and Merry Christmas to you and your family also!!!
@starecmirec
8 ай бұрын
Very useful ideas to improve my HA and spend less time with my family in favour of my smart home 😉
@BeardedTinker
8 ай бұрын
Glad to hear that and I know your pain!!!
@louisviciedo
8 ай бұрын
Great stuff, love these gems!
@BeardedTinker
8 ай бұрын
Glad you enjoyed! Thank you!
@EsotericArctos
8 ай бұрын
I think a simple sensor, like a Tuya or Aqara temp and humidty sensor work well outside. I have a tuya zigbee sensor outside in a housing, it has been out there for about 3 years, and it works flawlessly. I just have it in a location that is not in direct sunlight so it doesn't report wrong temperatures, but all sensors will have that issue.
@BeardedTinker
8 ай бұрын
They do - people tend to overcomplicate things and try to find something for a specific use case (outdoor sensor) while actually, most will work if protected and housed properly. And that reminds me - still have unpacked SwitchBot BLE temp/humidity sensor, that actually is advertised as outdoor one. Need to test it.
@carlosgallego1076
8 ай бұрын
Thanks for the video.
@BeardedTinker
8 ай бұрын
You are welcome! Thanks for watching and comment!!!
@andreasaichele
8 ай бұрын
Thanks for the great video, one more question: Why do your plants have batteries? Which sensors do you use?
@BeardedTinker
8 ай бұрын
Ah, I'm currently using mostly HiGrow boards with custom ESPHome firmware. Trying also Zigbee plant sensor, but not happy with that one and also not happy with batterylife of ESPHome one. Probably will replace everything with BLE version.
@dkickelbick
8 ай бұрын
Thank you!
@BeardedTinker
8 ай бұрын
Thank you :)
@grzehooo88
8 ай бұрын
Great gems - best and most useful vid untill now :D
@BeardedTinker
8 ай бұрын
Glad to hear - thank you!
@justatiger6268
8 ай бұрын
6:20 This part is not very clear and doesn't work for me. What do I need to do in order for this card to work/appear with a populated list of my batteries? Great video though as these are truly useful! Just need to get them to work now.
@BeardedTinker
8 ай бұрын
It depends- As I've shown in video, I've added all of them by hand. But you can use code from documentation to auto-populate it - check documentation here: github.com/maxwroc/battery-state-card?tab=readme-ov-file#default-card-config
@yousaf.saleem
8 ай бұрын
For inverse you can use inverse helper
@BeardedTinker
8 ай бұрын
What is inverse helper? I know about template switch inversing.
@yousaf.saleem
8 ай бұрын
@@BeardedTinker it came with spook official homeassistant Ghost.
@bloopasonic
8 ай бұрын
Some (most?) indoor humidity sensors will not survive in condensing humidity conditions. I've ruined a few wirelesstags that way. They worked for a while, but never survived too many foggy nights.
@BeardedTinker
8 ай бұрын
I have 5 that are in "extreme" conditions - from temperature and humidity side - 2 for fridge/freezer, and two directly on the outside in Stevenson screen + one without a case also outside. So far so good after few years. Even batteries last OK, not as long as those inside, but still at least a year.
@michaelthompson657
8 ай бұрын
Also on the last one, instead of using outdoor sensors could you just use the senses from your weather integration?
@BeardedTinker
8 ай бұрын
If you pull them as sensors, sure, why not. But those don't update that often and also don't necessarily give exact data for your location. But for general use weather data is more than enough
@michaelthompson657
8 ай бұрын
@@BeardedTinker yeah I’ve done this, so I’ll see how it goes
@xipsilva
6 ай бұрын
Is there a card that has the battery percentage and the type of battery it uses
@BeardedTinker
6 ай бұрын
Currently, not just one card, but with Battery notes and Battery State card, you can do that. Also from what I've heard authors have been in talk to make it easier to combine results from both components together.
@holgerschurig4430
6 ай бұрын
I found no way to add batteries to the Battery Monitor that were exported via Z2M. The problem here is that they don't show up as devices, only as entities. And here I can only add devices.
@BeardedTinker
6 ай бұрын
I too use ZB2MQTT. Not sure what devices are you using, but if it's via MQTT, you should see device with multiple entities. But you can always ask author, he is a great guy and very active with development.
Пікірлер: 74