That first coral wasn't a flowerpot but an alveopora. They look similar but aren't the same. Goniopora (true flowerpot) has wispy like tentacles, but on alveopora there are 12 that look like fingers. They are not a very common specimen. The red Goniopora (actual flowerpot) is somewhat picky. I've had one for about 8 months now and for a while, I thought it was dead, but is making a comeback. Awesome content....looking forward to future vids. Also, you might wanna try Red Sea Reef Energy AB+. AB+ is much less messy as far as increasing NO3/PO4 since it is basically pre-digested and all the coral has to do is absorb it. Reef roid doesn't get all taken up in the feeding due to the energy the coral uses to consume and digest leaving some nasty skimmate in a skimmer and raising your NO3/PO4.
@richardportelli1983
3 жыл бұрын
FYI your Ato sensor should be inside your return chamber. And keep the water level lower than your display so you get proper surface skimming.
@eddierodriguez5030
3 жыл бұрын
Came here to say the same... Tank is looking great nonetheless. Cheers!
@JMehalick
3 жыл бұрын
ANDDDD that overflow chamber gave me so much anxiety.
@johnbernier1025
3 жыл бұрын
Why is that, just wondering
@jdhaquatics6096
3 жыл бұрын
I will switch it over right now! Thanks for the input. I have overflow raises being 3D printed at the moment. I hate having my water level so low in the display but I’ve been trying to work with getting the overflow right
@richardportelli1983
3 жыл бұрын
@@jdhaquatics6096 it's better to have it lower. Less chance of fish jumping to their death.
@khinthithikyaw7153
3 жыл бұрын
You’ll be famous in no time!
@miguelsalty
3 жыл бұрын
Wow I just found your tank on recommended and it’s beautiful 😍🥺
@jdhaquatics6096
3 жыл бұрын
Thank you!!
@fishchrome1332
2 жыл бұрын
Love this reef! The long shape is super cool. Reminds me of Technicolor CinemaScope! Beautiful.
@joehandfl1
3 жыл бұрын
Great idea on thermostat . I have been running a fan and at night it gets tank too cold. I will try your setup
@cezar050681
3 жыл бұрын
The level in the pump chamber should be lower to have a better skimmer surface and the ATO have to be in the same chamber. Overall the water have to be lower in the back chamber when the pump is working otherwise when you stop the pump the tank will overflow on the cabinet.
@jdhaquatics6096
3 жыл бұрын
Agreed! I have custom overflow water line raises being 3D printed at the moment!
@Tmillar321
3 жыл бұрын
Nice tank man. I do agree that you have your water level a bit high. Also, if you want to get rid of that oily film on the surface just lay some clean paper towel over top, let it soak and toss in the trash.
@SaltFishTV
3 жыл бұрын
Great video! Your tank looks so beautiful
@ericsfishingadventures4433
3 жыл бұрын
Since the ato you use is discontinued from brs. For a good price I'd recommend the reef breeders prism ato, or they have a slightly more expensive one that works as well. But after nearly 17 years of reefing one thing I can recommend is, don't go cheap on equipment! If you can help it! I understand, we all have to start somewhere!
@andy2798100
3 жыл бұрын
Wow. That’s a great looking setup. Glad I found your channel. If you ever want to upgrade your powerheads have a look at the new ai Nero 3. Looking forward to your updates.
@jdhaquatics6096
3 жыл бұрын
Thank you! I will let you know :)
@Tanton.
3 жыл бұрын
Wow, great video :) I'm surprised u only have 60 subs. Keep pushing out content and u will get big one day :)
@jdhaquatics6096
3 жыл бұрын
Thank you, will be posting more soon:)
@Tanton.
3 жыл бұрын
JDHReefing ❤️🙌🏼
@mtwdew45
3 жыл бұрын
Damn your water level is really high you should definitely let the surface skimmer do it’s job and your tank will look a lot better
@ImTheRealJake
2 жыл бұрын
What temperature do people keep their houses at, where they would need to cool their tank? I live in Florida and have never had to cool a tank in 20 years.
@jdhaquatics6096
2 жыл бұрын
2nd story condos get hot haha
@rothschildianum
2 жыл бұрын
It looks very nice, why is it a nano? Looks big.
@Silva_loft
2 жыл бұрын
Do you have any recommendation for a wavemaker for my 15 gallon cube?? The one you have seems for 20-40 gallons
@mittenreefer
3 жыл бұрын
Your water level is super high... It should just go over the slots on the back into the first chamber so that it skims the surface. I think you should also move your ATO into the return section... Nice tank tho.
@ct2368
3 жыл бұрын
Great video.
@shamnen8117
3 жыл бұрын
Hi i believe you need to lower abit your sensor ato. Surface skim the oil film.
@badreefer
3 жыл бұрын
What does your back chamber look like? Media, sponges, etc. Thanks!
@ReeferGenesis
3 жыл бұрын
awesome
@deenice48
3 жыл бұрын
What's size is your tank and where did you get it from nice setup thank you for the information please
@jdhaquatics6096
3 жыл бұрын
Thank you! It’s a 30 gallon innovative marine. I bought it off Craigslist, but mine is actually for sale if you’re interested!
@jril3982
3 жыл бұрын
Umm, the ato sensor needs to be in the pump return chamber. In the overflow like it appears to be in the video you'll empty the pump chamber before the ato comes on.
@johnbernier1025
3 жыл бұрын
Beautiful tank, use some of the same equipment on my Waterbox 20. How did you get to coral attached to the back glass? My GDP drags keep falling off. Used Seachem reef glue but it just does not hold.
@jdhaquatics6096
3 жыл бұрын
It’s a magnetic reef rock, I have a video posted on it!
@vernontoole3539
3 жыл бұрын
What size is your tank and how much did it cost that looks really nice
@jdhaquatics6096
3 жыл бұрын
30 gallon long aio. Brand new about $450 through bulk reef supply!
@tarakkhouja
3 жыл бұрын
what are the dimensions of the aquarium and the sump filtration part at the back ?
@pushforlifeb
3 жыл бұрын
what lights are you using?
@e.zsaquatics8869
3 жыл бұрын
Hey man, what you filming with?? Looks amazing
@jdhaquatics6096
3 жыл бұрын
Thank you! 🙏 funny enough, it’s a canon t4i. Can probably pick one up on CL for about $300 body only.
@adamday4283
3 жыл бұрын
What settings are your blue and whites on.
@jdhaquatics6096
3 жыл бұрын
50% white 50% blue, with about 80% intensity!
@Messier87_M87
3 жыл бұрын
The kalk doesn't ruin your ato pump?
@jdhaquatics6096
3 жыл бұрын
No issues so far, I’m willing to take the risk at replacing a $30 pump. I’ll be sure to update in the future if I have any issues!
@Meganzales
3 жыл бұрын
😀👍🏼
@abh3960
3 жыл бұрын
No skimmer needed. Over kill. Buddy
@jdhaquatics6096
3 жыл бұрын
It worked for me! :) Buddy.
@ProjectMotoGraphics
3 жыл бұрын
That’s no nano tank 😂
@darrenshore5853
3 жыл бұрын
Thats not a nano tank
@mikehawk9397
3 жыл бұрын
Very wrong. U don’t need fans at all.
@martouf13
3 жыл бұрын
The fans are completely pointless. With todays LED lighting the amount of heat that will effect your water is next to nothing. I have kept nano reefs for years and never added a fan to them. I have a completely covered 12gal nano reef tank with LED's. With the lights on 10hrs a day it heats the tank from 77 to 78. A shift of one degree in that time frame means nothing. There will be no negative affects whatsoever to any reef tank.
@jdhaquatics6096
3 жыл бұрын
I appreciate the input! I have found it works for me, maybe I’ll do a video testing the difference.
Пікірлер: 59