Stoked for the new setup!! 2 DAYS UNTIL THE RX7 GIVEAWAY IS OVER! Every $5 Spent gets you entered for a chance to win the FD-RX7 and $15,000 CASH! lzmfg.com drifthq.com
I love Johan's expression when Vargas said you aren't going to Starbuck's at 11,000 rpm.
@marts8465
Жыл бұрын
Next video, going to Starbucks at 11,000 rpm
@kasper_429
Жыл бұрын
**Stares in Puerto Rican disgust** 🤣🤣🤣🤣
@zakkaryhoffman8503
Жыл бұрын
Happy Birthday big G. The heart and soul of fabrication at LZ
@716tg3
Жыл бұрын
Sabor Latino 🔥✌🏽
@zakkaryhoffman8503
Жыл бұрын
@DM-Adam_Lz this isn't real
@JB-sv5pr
Жыл бұрын
Let's gooo🎉🎉🎉🎉🎉🎉
@00ruva00
Жыл бұрын
Obro
@malcolmroberts6749
Жыл бұрын
I always liked Adams technical talks or as he puts it "nerd out". We get a little blend of everything with this man, best auto content creator
@00ruva00
Жыл бұрын
Bro is literally #1
@bkm_f30
Жыл бұрын
Never sick of 4 rotor content Adam
@shotgun3946
Жыл бұрын
I wanted to like your comment but it’s at 69 likes which is noice
@YaBoiDan
Жыл бұрын
The vargas bros are legends, love seeing them around
@amzaraiman
Жыл бұрын
Whats fun about adam is that hes always experimenting and doing thing step by step, he didnt just made the most from the engine at the begining.. love you man and happy birthday johan
@derrickblagg1440
Жыл бұрын
I appreciate all the rotary wisdom you share openly. Some people don’t give out the tuning secrets and I believe the rotary engine can outlive the other traditional engines. It just needs to be fully developed. One day it will be on hydrogen? We will see
@haydenallen888
Жыл бұрын
Mazda already released a hydrogen RX8 in the early 00s
@ajcinstalls
Жыл бұрын
I'm gona be that guy and say you should have gotten the 26b from PPRE in NZ. They have a proven track record of building reliable, high horsepower 4 rotors. Also, cannot frikin wait to see Adam in DMEC next weekend!
@LimitWHK
Жыл бұрын
As a.kiwi.myself I think they are sick, however it's awesome to see these guys do it themselves
@bogeybros7972
Жыл бұрын
Once again really love that fact that he put Pete in the video again all because another subscriber said his mother wants to see more pete in the videos, now pete has been in 2 videos in a row
@Toyota71
Жыл бұрын
I want to see you do well in drift masters and I think taking your e36 over is the best move - You absolutely rip in that thing. I think you’ll struggle to adapt to a foreign car so I wish you good luck 👍🏻
@coreytrevor3910
Жыл бұрын
Yeah I don't want 3 videos explaining why he isn't used to the car or why he couldn't be competitive. I know Adam has a ton of cars but he needs to get out of the mindset that cars aren't wildly different. He has the time to hone his skillset so chassis and balance is less important. Sure 4 rotor supra is different from his e36 and his s15 or his rx-7 sure. But its all just adjustments as he wheels. The more he tries to set the car to him the harder it is to set the cars.
@klimmersimon
Жыл бұрын
I think Adam said he won't take the e36 because it has a different (less competitive) motor in it. The motor that he was successful with is not in the car anymore. I don't remember why but I think that's the main reason.
@texaspowerman
Жыл бұрын
Hopefully he can borrow one of Deans cars, a euro fighter would make him plenty competitive.
@kasper_429
Жыл бұрын
@@texaspowerman This is what I'm hoping as well. Imagine him in James' E92 drift car. Idk if it will happen, but it would be amazing lol.
@BlueEternities
Жыл бұрын
Oh baby, seeing this video on my feed made me quite happy. I'm completely in love with the 4 rotor Supra build. The only car that really fits into true dream car status for me.
@giovanniywk
Жыл бұрын
Bro is living every car guys dream but with all that still comes hard work keep up the good content Adam 💪
@Yourepathetic228
Жыл бұрын
Who’s dream? You’res maybe but no one else… this guys an idiot
@levelrideconcepts
Жыл бұрын
Congrats on getting into Drift Masters.! Great content, as always.
@sombrero4316
Жыл бұрын
Adam didn't get into dmec. Dmec got adam inside it.
@fletcherrenken8783
Жыл бұрын
As a man who has a foil tape quite a bit I highly recommend trying the ISC racers tape over the 3M stuff. it’s a bit less flexible but very durable. All the ISC Racers tape products are hard to beat.
@brogan39
Жыл бұрын
Can't wait to see you compete in DMEC. Love that you guys are simplifying the small details with this build little by little.
@olumayoor
Жыл бұрын
So nice to see BOTH Vargas brothers!
@Kraztec
Жыл бұрын
Cmon luck, be on my side. Always dreamed of owning an FD(rotary powered ofc). GL to all who entered
@gabrielrenaud1965
Жыл бұрын
Can’t wait to see it in person in Toronto! Love the four rotors!
@tallpaull9367
Жыл бұрын
Renault R5 Turbo from the 80's build would be so sick on the channel !
@crc0889
Жыл бұрын
I wonder how much it would cost him to source one and import it. Like do they even know what a Renault is?
@tynanlowndes1142
Жыл бұрын
He needs a ford au falcon wagon
@jesseoconnor475
Жыл бұрын
@@tynanlowndes1142not a wagon but au yes
@biglefty08
Жыл бұрын
Everyone dropping movies today 🎬🍿
@JohnnyBawlz.
Жыл бұрын
Whos everyone? Lol
@pachecodc5
Жыл бұрын
Who’s everyone?
@jacobb7043
Жыл бұрын
Who's everyone
@firefly2472
Жыл бұрын
Who's everyone ?
@yerrrrray
Жыл бұрын
Who’s everyone
@cingkole7893
4 ай бұрын
I miss this car! I hope you bring it out to more events in the future!
@brasshound4442
Жыл бұрын
Cool to see Pineapple racing still around, bought a motor from them many years ago.
@macbook802
Жыл бұрын
Use thicker oil for thicker clearances
@afghanwildlife5260
Жыл бұрын
Happy birthday Johan I wish you live to see many many more to come. 🎉
@thedudeprime4677
Жыл бұрын
16:00 Took me a minute but those are Vargas's parents! Cool to see they got to check that place out too, pretty sure they live in Florida too so it wasn't too far of a drive
@jordangarneau8817
Жыл бұрын
Could of solved the fuel starve by drilling a million holes in the stock pump hanger , and treating a 1/4 tank of fuel as " empty" ..... with the surge I would have used a magnafuel inline pump out of the bottom of the surge . Less pumps working is more simplistic.
@Sir.VicsMasher
Жыл бұрын
7:00 Sharkhide wipe on metal protectant would really help keep your bare metal parts looking fresh. Other KZitemrs have done vids on it and is on Amazon.
@NeedANameWithoutNumbers
Жыл бұрын
Dude you have just all around a solid group.
@functiongarage
Жыл бұрын
Not alot of people building 4 rotors now a days. Vargas and Steve @ SMG Racing are the only two Ive seen pushing them out and not scamming people like RPM and other shops. You guys had oiling issues over pressure etc before right? Loosening clearances makes sense. Quality rotary content!
@WestAuckMx
Жыл бұрын
Look up PPRE
@isaacnewton7940
Жыл бұрын
Ppre are doing loads per year, James Deane dropped his in car in a week and is fine.
@danieltucker9890
Жыл бұрын
@@isaacnewton7940 Within 3 days James had his on track in Mondello for the LZ Festival, granted he did say it need a little work but he did have it going all weekend only switching to the S14.9 for the end on the Sunday. But yeah PPRE in New Zealand are the go to lads for some big names including J.Deane and M.Whiddett etc.
@isaacnewton7940
Жыл бұрын
@@danieltucker9890 exactly, drop in, tune and go.
@functiongarage
Жыл бұрын
I should clarify in the US lol. PPRE are fantastic but in NZ and not always an option for us.
@jaey4493
Жыл бұрын
Happy bday bro, definitely a big contribution to the team
@dgh0yt
Жыл бұрын
Definitely not bored with the 4-rotor content!
@IDLExHANDS
Жыл бұрын
I've seen someone on the Hoonigan channel that put a water oil cooler before the air oil cooler. Pretty neat setup.
@alexeveridge4401
Жыл бұрын
Paint the underbody for the flex. That shot was beautiful 17:20
@itzremyzoo9247
Жыл бұрын
super stoked on the house reno update
@texancagefighter
Жыл бұрын
Impossible to be sick of rotary content
@macbook802
Жыл бұрын
Run equal sized oil lines and loop them to equalize the pressures
@daudadnan5
Жыл бұрын
Happy Birthday Johan🎉🎉
@neukin
Жыл бұрын
Just seems the oil exit fitting could be reduced to increase pressure but I have no idea ha. I would usually tig weld the fitting and drill the proper hole in the fitting for precise diameter if you know what i mean. GL
@imnotsurewhy
Жыл бұрын
Getting both the Vargas bros to build, tune, and work on your rotary engine is a flex all on itself
@Oxyenless
Жыл бұрын
lets hope that exhaust doesn't affect the intake air density given how close it is
@dmariusg
Жыл бұрын
Johan comparison of the factory fuel basket to his own hand was hilarious, like look at this small thing compared to my giant hands 🤣🤣🤣 v2 sound deeper, not that whinny, love this sound better
@mornayappolis
Жыл бұрын
The E36 would have been so cool to see at DriftMasters but still stoked you'll be driving
@VelocityFreak
Жыл бұрын
No E36 is a mega bummer, I think you'll have a blast in a local car but would have loved to see you in absolute peak competitive form and the E36 100% brings that out for you!
@TJon2
Жыл бұрын
The leprechaun smoking that clover 🍀 😂😂
@stoichiometry147
Жыл бұрын
Johan’s reaction @11:58 about 11k to Starbucks is a f*^kin’ energy! Haha
@bigceegracious5418
Жыл бұрын
Never sick of 4 rotor content
@CraaaigV302
Жыл бұрын
Happy birthday johann hope you had a beautiful day spending it with the friends and family that love you the most ❤
@liondufflebags8484
Жыл бұрын
Happy Birthday to one of the Goats in the LZ world 🤝🔥🔥🔥🔥
@Shadowband72
Жыл бұрын
If you have low oil pressure , go to a slightly higher weight of oil . The lack of compression , leads to more oil getting through . So you have plenty of volume , but if you put in a higher weight of oil . That should drag the pressure up a bit at least . I had a 400,000 mile Camaro , that I put diesel oil in in order to get the proper oil pressure . Manufacturers suggested oil weights only apply to factory new engines .
@ultimatejay
Жыл бұрын
The only way a rotor bearing can fail like that is from a couple things. 1- lack of oil/ pressure. 2- rotating assy out of balance, 3- bearing clearance incorrect for rpm use- over revving it. Also, 4 rotor pport should easily make 600hp
@Ṟïp_çħämp
Жыл бұрын
He definitely has an oil pressure he should work out the oil pump first then work he’s way back.
@Krynis
Жыл бұрын
Happy Birthday dude.
@brycegoddamnit
Жыл бұрын
Use and log both oil pressure sensors. More safetys=happier longer lasting engine
@troygreen2727
Жыл бұрын
Adam bruh what are you talking about ! I think you will regret not taking that car . You’re really good driving to E36 , I’m mean Colette your girl but low key your E36 is too …….. I think you will win with that car NO CAP 💯….. it’s one of the cars that you’ve been working on often and on consistently
@Thomasgammal
Жыл бұрын
Happy Birthday Johan!🎉
@Nismospec52
Жыл бұрын
There’s my rx7… good to see it again
@NathanSly-x3j
Жыл бұрын
Never enough rota content
@sixtytoogood-1452
10 ай бұрын
Never stop never stopping
@StingrayOfficial
Жыл бұрын
Shoulda kept the old bearing clearance for the front rotor so it maintains pressure. It's going to fail again, especially with Penzoil.
@nicolelongneckergallery
Жыл бұрын
Damn, Tony…. That thing is sweet. Cannot wait to see where you take this. Great buy….
@vladtulaydan957
Жыл бұрын
That Evo in the back😍😍… any upcoming vids on it?😁
@kotajames6211
Жыл бұрын
I personally think you should switch to Drift Masters!
@SniperFlakes
Жыл бұрын
still can’t believe that adam used to ride his bmx bike around for main content now it’s fully built cars it’s awesome
@thisjust-in2675
Жыл бұрын
HAPPY BIRTHDAY JOHAN!!!!
@subiludo1928
Жыл бұрын
Holy chet adam working on his cars and us seeing it happen? Feels like 3 years ago
@shanesmith8757
Жыл бұрын
happy birthday, Johan 🎉🤙🏻
@SiDeWaYzVR6
Жыл бұрын
I'm surprised Adam doesn't ceramic coat the header to keep those temps down in the bay especially with how close they are to the intake runners...
@dzzope
Жыл бұрын
Class hearing yor competing in DM. Only thing I could think of being better would be if Vaughn was bringing the whole rest of the team. Be a hellofan event (already is but would be fun to se the mix in full on comp)
@ZC-Hobbies
Жыл бұрын
Still can’t believe you are going to Poland!!! So sick to see you in dmec
@X14_RCA
Жыл бұрын
The best time of the day has come, crack a beer and enjoy boys. Cheers 🍻
@colbybryant4880
Жыл бұрын
Happy Birthday Johan 🎉
@mohammedalmandhari4041
Жыл бұрын
Happy birthday John..
@Apex.AP1
Жыл бұрын
Happy Birthday Johan! 🎉🎂
@stevenraymer6682
Жыл бұрын
Thanks for the great content
@richard-em6zi
Жыл бұрын
On the current oil system in order to maintain that high oil pressure now with the larger clearances would be to get a thicker viscosity oil
@CodeineAbdulJabbar
Жыл бұрын
SEAN DEEP STROKING IT 17:21
@hawk_001
Жыл бұрын
HAPPY BIRTHDAY JOHN
@AdinSLaboy
Жыл бұрын
Hell yeah sazon con flavor eso va a quedar en la madre love it
@AdinSLaboy
Жыл бұрын
Bro I wish u take it to CT to see it in real life 🙏💤💥💯🔥
@00ruva00
Жыл бұрын
Sean BOOTH looks like a GINGER GOD now
@BenjySparky
Жыл бұрын
Happy Birthday Johan! Peace
@bboyvillain84
Жыл бұрын
Happy belated bday Johan! 🎉
@kevinfunk83
Жыл бұрын
DMEC? Nice. Happy birthday John!!
@mickdejager3910
Жыл бұрын
Happy bday big fella from Australia 😁😁
@brettgaebel665
Жыл бұрын
Just got some merch from Zumiez and it might be my new favorite shirt. Thank you Adam!!!!! Love from Canada!
@chasprice2260
Жыл бұрын
Happy bday Johan!
@TN.8888
Жыл бұрын
Adam is gonna be all over the mukka Motorsport 6 rotor FD from New Zealand when Lz world tour Aus is on
@ziglol
Жыл бұрын
HBD JOHAN!!!
@ryanabson7001
Жыл бұрын
Happy birthday Johan 🎉
@kersa1995
Жыл бұрын
Looked like you were building a rocket with it on the stand vertically 😂 Happy birthday Johan!
@P4FElton
Жыл бұрын
11:55 the "you dont know my boss" face from "yohan" xD
@jpaqmedia
Жыл бұрын
he finna hit 12,000rpm 🤣
@loganhughes3981
Жыл бұрын
Happy birthday johan!
@lucasnatson6536
Жыл бұрын
Im super excited to see you in out home Poland at PGE, man that will be crazy! Kinda sad that you cant get yout E36 out there, i would love to see you in car that you are comfortable HOPE that you can source car that really suits you. If Więcej will be driving new Supra, maybe his champ S15? That would be insane 💪💪
@davidstevenson1211
Жыл бұрын
Awesome work as usual but fuel setups are the weak point of each build that's the only negative thing
@RotaryMotoring
Жыл бұрын
Its not the shock of detonation, it is the extreme heat input/expansion to the rotor from detonation that alters rotor seal, bearing and flank (width) clearances.
@00ruva00
Жыл бұрын
HAPPY BIRTHDAY TO THE GOAT JOHAN !
@Umair-Ali007
Жыл бұрын
20:43 shawn looks like the guy from the movie jumanji 😅😂😂
@Jtechnical0821
Жыл бұрын
It's nice to see the OG Cream 13 in the shop getting some love
@narciso19G
Жыл бұрын
I’m telling you, gota start running that Valvolune VR1
@gogetem188
Жыл бұрын
Hi all sounds clean maybe its started to spin again ?
Пікірлер: 415