The DIYer community owe you a big Danke! God bless you and one again, appreciate your efforts.
@saikumaru2813
4 жыл бұрын
As always, great job! And sometime I wonder how you get so much time, when you said you have been researching since an year on the chip, goes to show how valuable this is for us.
@atc1441
4 жыл бұрын
Thank you, its been a years since i searched for a flashing method but i got the Telink flasher about 2 weeks ago, and till then it ocupied my time and couldnt get a clear head till it was done. Learned a lot :)
@PCman50
2 жыл бұрын
My truly humble thanks for your extremely hard work and especially your willingness to share this amazing way to use the Xiaomi thermometer in a much more functional way, and especially now I can use it in my Smart Home using Home Assistant. Thank You sincerely. 👍🤗
@mrdrbernd
4 жыл бұрын
Bought a pack of three for 10 EUR. Finally managed to integrate them in Node-Red. - Thank you very much! Great work!
@mattharris6958
4 жыл бұрын
Do you have a guide for that? :)
@tablatronix
3 жыл бұрын
I just flashed 4 via the web flasher, incredibly done, thanks
@rklauco
3 жыл бұрын
Absolute respect. Thanks for all the effort you did on this. Already sent small donation to you, I'll keep on doing that whenever I buy new set of those small miracles :)
@atc1441
3 жыл бұрын
Thank you! :)
@tuccler5420
3 жыл бұрын
I was searching for a solution to connect the thermometer to Home Assistant without an Rasperry (with installed BT to MQTT script) and found this video. Explained very good how to flash the device and/or how to get the secret. I should be able now to config the ble monitor for HA. Thank you! :)
@lycakito1814
3 жыл бұрын
Thanks very much for doing this, I have 6 of them now, spread around the house... great work! Thank you!
@MrDoctorApple
3 жыл бұрын
Einfach nur genial ! Vielen Dank, das müsste man nur noch mit den Flora / Garten Sensor hinbekommen ;-)
@atc1441
3 жыл бұрын
Habe leider noch keinen :) aber die möglichkeiten sind gross bei den produkten
@sergemichaux8324
8 ай бұрын
Hi, mine stays in 18:05:35: Connected - 18:05:42: Activating now, please wait... forever. I have updated it on the mi app now, and still nothing. Can you help me?
@DarronBirgenheier
3 жыл бұрын
I received one of these from an eBay seller. Your web browser-based flashing process was VERY easy and I now have an "unlocked" BLE thermometer/hygrometer, to be used with a "Tasmotized" ESP32 device. Ordering more!
@atc1441
3 жыл бұрын
Thanks for letting us know :)
@DarronBirgenheier
3 жыл бұрын
@@atc1441 Do you know what the approximate battery life is with a 5-minute advertising interval, and a CR2032 cell? I will probably make battery holders for 2 AA cells, if I can't get a year out of a single CR2032 at 5 minute intervals.
@atc1441
3 жыл бұрын
6 month is the rough runtime
@DarronBirgenheier
3 жыл бұрын
@@atc1441 I assume that battery life is not directly proportional to reporting interval, meaning that setting the interval to 10 minutes will NOT result in a one-year battery life?
@atc1441
3 жыл бұрын
Correct
@videolan
Жыл бұрын
Fantastic work. I'm sure thousands of us are really grateful. Thanks again
@erikslevin
3 жыл бұрын
ich komm von nem englisch sprachigen YT-Chanel und ich merke sofort, das ein Deutscher hier am Start ist :D
@atc1441
3 жыл бұрын
Richtig ^^
@famousadequately
9 ай бұрын
Both on my PC and Android phone, Telink Flasher connects to the devce, LYWSD03MMC, but after I press the "DO ACTIVATION" button it hangs there forever. What may be the cause of this problem? Connecting to: LYWSD03MMC 23:41:46: Detected Mi Thermometer 23:41:46: Connected 23:41:51: Activating now, please wait... .. to eternity...
@johnbayfield7979
3 жыл бұрын
Thank you for this. Appreciate your time.. I had already bought 4 of the units, now they are so much more useful.
@pingudingu7974
3 жыл бұрын
Can you use them without bluetooth or when you are in vacation ?
@atc1441
3 жыл бұрын
Yes you can simply look at the display to get the Temp
@pingudingu7974
3 жыл бұрын
@@atc1441 ehrenmann
@palniyappahsuresh5433
3 жыл бұрын
Hi, could not connect to Bluetooth after flashing
@imrebabud5855
4 жыл бұрын
Amazing work, I learnt a lot from your repo, thank you!
@jorna8428
2 жыл бұрын
Gratulation! Absoluter Hammer mit Website zum Flashen. Einfacher geht es kaum!!
@andreasbohm7468
3 жыл бұрын
Klasse gemacht... Danke für die tolle Anleitung
@MahlerLab
3 жыл бұрын
This is gold! Thank you for your dedication. I am using this with Home assistant.
@a.v.1374
3 жыл бұрын
can you tell me how?
@MahlerLab
3 жыл бұрын
@@a.v.1374 Please check kzitem.info/news/bejne/s6qA1qxue4yngKw Basically you can use an ESP32 to read the BLE signal and use WiFi to talk with Home Assistant.
@tuccler5420
3 жыл бұрын
@@a.v.1374 I'm currently using github.com/AnthonyKNorman/Xiaomi_BLE_Temperature_Display_for_HA with an Raspberry Pi Zero W. I will switch now to this custom component: github.com/custom-components/ble_monitor/blob/master/faq.md#my-sensors-ble-advertisements-are-encrypted-how-can-i-get-the-key Probably with the custom firmware from Aaron. :D
@a.v.1374
3 жыл бұрын
now they working on my intel nuc? Bought an bluetooth usw dongle and used the ble addon on home assistant. with the flash the worked immideatly
@MahlerLab
3 жыл бұрын
@@a.v.1374 Thanks for the follow-up. Glad you made it work!
@chriswisselo4329
3 жыл бұрын
Hey Aaron! Thank you so much for your work on this man. Really appreciate it. I do have 2 questions: 1. After flashing the custom firmware, the TelinkFlasher refuses to connect? 2. If you do an activation again, the MI token and MI bind key seem to have changed (stock firmware)? Keep up the great work. You're a true asset to the SmartHome DIY community.
@Druidus98
3 жыл бұрын
Works like a Charme - just brought my first device into Home Assistant - many thx 🙏🏻
@gergohamal94
10 ай бұрын
Hi! I tried the method, but after clicking on do activation, it shows all data, like token or bind key, but in log it shows Activating now, please wait and nothing changes. Do you have any solution for this?
@DM-fz3ly
2 жыл бұрын
NOTE: for anyone who is having trouble connecting to the module after flashing firmware from their PC, I was able to use my android phone with the web flasher and connect and make changes (like C -->F) so try connecting from your phone if your PC won't connect.
@jptoni9305
2 жыл бұрын
Great Job,thx. It works very well, with WeMos D1mini 32 and Tasmota Bluetooh.
@sawekky2392
2 жыл бұрын
You are great, thank you! I definitely will try it out and I hope it still works after two years :D Wow, the web flasher looks quite different now :)
@hassanzahin1534
3 жыл бұрын
Man, you are really underrated.
10 ай бұрын
Hi, after I updated to this firmware I can't connect to Xiaomi home. Is it expected?
@dirkstrauss8515
3 жыл бұрын
Vielen Dank, habe mir die besorgt und kann damit jetzt meine Lüfter im Humidor steuern
@DasMooorhuhn
3 ай бұрын
That's the art of opensource :D Love to you
@Fighting-Egg
Жыл бұрын
mega! Habe ein paar von den Dingern bestellt, werde das versuchen. Vielen Dank schonmal!
@JBR.1974
2 жыл бұрын
thanks for this video...exactly what I needed to get all 4 of my sensors flashed and into HA...
@billkater
2 жыл бұрын
How long did it take HA to see your devices?
@JBR.1974
2 жыл бұрын
@@billkater a few minutes. And all still working weeks after this post I’ve actually stopped it picking up new devices as it was seeing so many
@Muffinman1337
3 жыл бұрын
Super nice, besonders der WebFlasher, danke Aaron!
@atc1441
3 жыл бұрын
Danke dir
@vladoportos
4 жыл бұрын
Fantastic work ! now to flash all 20 devices I have :D
@atc1441
4 жыл бұрын
:D please validate it first one less devices in long term
@carltonbettsno19
2 жыл бұрын
I just received a bunch of these how can I tell what revision mine are?
@СергейЕ-ж8э
3 жыл бұрын
Спасибо огромное - Прошилось отлично!!!! Thank you very much - it was done perfectly !!!! Thank you!
@martingerken7094
Жыл бұрын
Excellent, works like a charme!
@Stefan188x
3 жыл бұрын
nice danke, bin heute mal dazu gekommen endlich neue Batterien für die Dinger zu kaufen(die Anzeige meint übrigens nur noch 20% voll bei neuen) und wollte das Projekt die über den Raspi in die Überwachung einzubinden mal wieder aufnehmen
@csupakabra4
3 жыл бұрын
Oooh! How can someone downvote a video like this!??
@technoboi0
3 жыл бұрын
Thanks to Aaron Christophel for the device firmware and thanks to the guys who have updated the web software to be much more versatile now. I found I can use the Vivaldi browser in Linux to do the flashing and the customisation is working much better now. I did have trouble doing it on my phone but now I can do it on my computer I much prefer that anyway.
@blakrj
3 жыл бұрын
Awesome! Going to look into these for use with Domoticz
@AntKardano
3 жыл бұрын
this is AMAZING work, thank you
@mlefe09
3 жыл бұрын
Amazing, thank you for the all hard work!!
@Ericx25
3 жыл бұрын
Thanks for your work ! It was so easy to flash. Once flashed the thermometers are not visible on my Android phone in the Bluetooth menu . What app are you using here (at 4:53) to display the BLE devices ?
@atc1441
3 жыл бұрын
Hey. It is nrfconnect
@vicki211
2 жыл бұрын
I flashed and paired mine with a tablet, works great! I unpaired and tried to repair - now I can see the device in the web flasher and in nrfconnect - but it no longer appears in the tablet when I scan for bluetooth devices... any idea?
@afronob
3 жыл бұрын
Good job dude! Thanks a lot for your work...
@DarkH4X0
2 жыл бұрын
My xiaomi sensor LYWSDCGQ (circular one) is detected, but when I try to connect on the website it doesn't work. I'm in Chrome and I have also activated the experimental web feature,. How can I solve this? The logs say: 07:51:18: Connecting to: MJ_HT_V1_DFU 07:51:19: NotFoundError: No Services matching UUID 00010203-0405-0607-0809-0a0b0c0d1912 found in Device.
@1470alex
3 жыл бұрын
Amazing, it works! So flashing needs to be! Thank you!
@dregic2348
3 жыл бұрын
Have you anyone try to connect this Thermometer to Homekit? I'm trying use it with Homebridge and I cant get it working. I have that bindKey... If is flashed that sensor is still encrypted or no? Thanks
@FrankGraffagnino
4 жыл бұрын
This is really great. Thanks for your work on this. And your english was great! - Frank in Houston.
@atc1441
4 жыл бұрын
Thank you!
@goran1986m
2 жыл бұрын
My mi humidity sensor 2 shows almost 20% higher humidity than my other hygrometer. What is the problem, how to know which one to believe ?
@Clarisse0203
3 жыл бұрын
Thank's for your answer, but if have only one Xiaomi thermometer
@zsitko
4 жыл бұрын
Nice job, thank you for this!
@juweinert
Ай бұрын
Lange her... Ich hab hier eine Version rumliegen und verstehe nicht wirklich. Du zeigst advertisement data under sagst, dass dort die Werte vorhanden sind. Im Inteo erwähnst Du irgendwas von Verschlüsselung und Aktivierung. Werden diese Daten erst advertised nachem man "aktiviert" hat? Meine hardware schein sehr anders zu sein, auch hat das LCD kein BT icon, dafür aber ein "link" icon am unteren Bildschirmrand. Kannst Du mir da irgendwas zu sagen?
@kotyakarapetyan
9 ай бұрын
Impressive! Thank you so much for sharing the result of your enormous work (more than a year!) with the community! I am probably missing something though. Why is the custom firmware needed, if you can read the temperature and humidity data with the stock firmware just as fine?
@bertagabor9111
16 күн бұрын
The flasher doesn't work with the newest stock firmware(2.1.1_0159), it can't get the activation done, an update would be awesome.
@DDryTaste
2 жыл бұрын
It's a shame this doesn't work anymore with newly purchased devices.
@rjchu
2 жыл бұрын
I’ve run into this as well. Flashed and worked fine but after pulling the battery and putting it back in the device seems bricked. No display.
@teuluPaul
3 жыл бұрын
Fabulous work! Well done, and many thanks!
@dbuczynski
3 жыл бұрын
Great modification. BLE advertise fine after uploading without establishing connection. However I was not able to change any additional options like: change Advertising interval nor any other custom settings provided via firmware.
@atc1441
3 жыл бұрын
Hey. Please try out the new modified firmware by pvvx, it is linked in the readme and has way better features :)
@dbuczynski
3 жыл бұрын
@@atc1441 okay, I've re-flashed all of my 4 devices and it looks like there is no issue after all. However those custom setting can be configured only on your firmware. One provided by pvvx doesn't react on changes - yet it still broadcast data perfectly. Thanks for this small change that makes big change in my smart environment.
@atc1441
3 жыл бұрын
Thank you for the info
Жыл бұрын
Amazing! Much Appreciated!
@wilfriedklaebe
3 жыл бұрын
Danke, jetzt muss ich auch noch 'nen BLE-fähigen USB-Dongle kaufen! ;)
@atc1441
3 жыл бұрын
:-P bitte sehr
@AgustinCaballero
3 жыл бұрын
Hi, great job I was about to flash it but first, can someone can please help me with some doubts: Why after min 5 of the video the temperature and humidity shown are different on both devices? After flashing this custom firmware which software do you use to see the data? xiaomi home app does not work anymore? can anyone please confirm if can it be used to authomatize anything? or connecting to google home? It mention you can flash the device back to the factory firmware by selecting the proper file, do anyone please know how/where can I get it?
@dmitrythezuryanovich
2 жыл бұрын
Great! Was able to do OTA update, but only Android phone and only from Chrome -- not from Firefox. Spend some time before figuring that out.
@atc1441
2 жыл бұрын
Yeah. WebBluetooth is really at its first stages by now
@kanapkazpasztetem
3 жыл бұрын
Thanks for doing the hard work!
@dottoreFell
3 жыл бұрын
Aaron, first of all, thank You very much for enabling us to use those little sweet sensors in the way we want. It is amazing work. I have been using one of them for few weeks and it is working great. Now I am about to start flash few sensors that I have bought later and I have two questions. One thing is, that with original Xiaomi software sensor updates displayed data every c.a 7 seconds. With custom firmware it does it much less often. Is there a way to make sensors with custom firmware show data on the screen more frequenty? Second - what is the difference between Mi Like and custom advertising type? I thought that Mi Like will be compatible with Xiaomi software, but it is not. Also as far as I remember I have problems reading data from sensor with Mi Like advert type...
@amintaleghani2110
2 жыл бұрын
@Aaron Christophel, thanks for your video, I flashed your firmware and choose to show the battery, but when the LCD is cycling showing the original measurments and the one with Battery symbol , the Humidity and temp. values are changing?
@历史的行程
3 жыл бұрын
Thanks for your effort on it. btw It's just 2$ in China.
@atc1441
3 жыл бұрын
Thank you :) Thats even more impressive that they get the price so much down
@AndyKarpenko
3 жыл бұрын
Danke, Aaron! :)
@adriangarside6279
Жыл бұрын
I'm trying to set this up with some devices I just bought off ali express. However they don't show up in the telink flasher. I can see them on my phone via a bluetooth le scanning app, and I can connect them to the Mi Home app where they appear pretty much instantly when I go to add. But I've tried to find them via telink flasher in multiple browsers on a PC, my iPhone and my rasperry Pi and they simply never show up. Did the latest versions block the flashing tool detecting them somehow?
@LEWISTAI
3 жыл бұрын
Thanks buddy...! Waiting for more...
@oxdudepoege
Жыл бұрын
Hello, i have two of those devices and I set them up to send a warning when the humidity reaches a specific value. But there is never an alert on my phone since I always have to connect them via the mi home app manually. Do I eventually need a Xiaomi gateway to have this function working? Or is there something I am missing? I would love to be connected to the device automatically every time I am near them with my phone. What's also strange is, that they just don't show up on the list of connected Bluetooth devices in the phones menu
@maneomatpod
3 жыл бұрын
Wow. Keep up the good work. Thanks for this.
@AndyShrimpton-GaaTech
3 жыл бұрын
Great work. New sub. Look forward to seeing your other videos
@srenlange5750
3 жыл бұрын
Great work! Have you been looking into the Xiaomi Pro Thermometer & Hygrometer (nice device with E-ink display) ? Maybe your findings on the LYWSD03MMC can be used for reading the data from the Pro as well?
@atc1441
3 жыл бұрын
The only other one right now is MHO-C401
@SuncoastLegalVideo
3 жыл бұрын
@@atc1441 There's another video on KZitem where he reviews the "Pro" version. It looks like the only difference (besides being bigger) is the addition of a clock. And with 2 batteries I think the clock might be totally separate from the sensor part. The interesting part is that if you look at the 3:30 mark in his video, his phone shows the device with the exact same part number of LYWSD03MMC. I don't have one to test but I would guess your firmware would work as-is on the "Pro" version. kzitem.info/news/bejne/maxpnIawkGp2h4I
@roots2825
3 жыл бұрын
Hello, thanks for the great project. For the custom FW, the one from the link which is the "platform" that should be used for ESPHome? if it's still "xiaomi_lywsdcgq" then what should we do with the bindkey. Thanks
@ohjajohh
10 ай бұрын
I can't connect to it through Windows and Android. Is it also possible to flash it thro nRF connect or something?
@ivolol
3 жыл бұрын
Awesome project! Would love to hear how exactly you recover the keys.
@atc1441
3 жыл бұрын
One week of trying, via reversing the Android app and rewriting parts of it and via reversing the stock firmware and the communication to the stock app :)
@tufoz7
3 жыл бұрын
i've done it but after updating customized firmware i can't get the info from the device.. it shows temp and humidity but those info are not read on the smartphone....
@kurtschatteman5193
3 жыл бұрын
Very very nice job indeed. I use 12 of these and they work like a charm. I was wondering. If you forget about the display (custom made as TH display) this would be a very neat platform for other sensor things. For instance a door sensor. Lots of pins are available as islands on the PCB to play with.
@atc1441
3 жыл бұрын
Yes that does indeed work :) kzitem.info/news/bejne/zppjqaN_kHxknpg
@kurtschatteman5193
3 жыл бұрын
@@atc1441 Great ... no Awesome is a better choice of words, and indeed the start of a nice journey :-) I'm accustemed to using Arduino IDE and ESPHome, but I would love to do some stuff in depth again (like you do). This device gives me the opportunity/reason to do exactly that. Which editor/compiler do you use for your projects? (I like to keep it simple and clean) Why I love this device : It could solve a lot of problems I'm dealing with. Small, button cell operated, thus efficient (offcourse that's up to the firmware) and cheep indeed.
@atc1441
3 жыл бұрын
I am using notepad++ as editor and the linked compiler at the ATCthermometer repo there is also a manual. Have fun :)
@DaveGee2010
3 жыл бұрын
Thank you for your efforts!!
@JPPV2010
Жыл бұрын
U rock man. Excellent!!!
@atc1441
Жыл бұрын
Thank you very much !
@jensflugge3157
3 жыл бұрын
Hallo Aaron. Leider funktioniert das Flashen nur mit der Originalfirmware. Bei ATC_Thermometer12.bin oder Vorgängern bekomme immer die Felermeldung: "Select file is no telink firmware.bin" und dann beim Flashen: "No file selected aborting" ..... Trotzdem Danke für die Arbeit
@nnd18571
3 жыл бұрын
Great job! Impressive work!
@arnoldbencz6886
3 жыл бұрын
Super video, great job!
@RP_Feynman
Жыл бұрын
Hallo, ich kann keine Temperatur- und Feuchtigkeitsinformationen mehr empfangen. Warum könnte das sein?
@MikeDent
3 жыл бұрын
Excellent. Should the flasher tool work on an iPhone? I dont seem to detect my device? Or on a Mac? Same, it does not show any device?
@atc1441
3 жыл бұрын
Hey. This will be helpfull github.com/WebBluetoothCG/web-bluetooth/blob/master/implementation-status.md IPhone is unfortunately not supported
@n1k7a53
Жыл бұрын
is it possiable to place 4 thermostat beside eachother and bulk sync/set/calibrate temperture to match (a real thermometer) instead og trying to guess the temperature offset while it keep changing, in some smart way?
@slyztercoreveanged3175
10 ай бұрын
hye, can i ask is it possible to modified the sensor chip and solder external K-type probe wire so it can read temperature from the probe instead of the original sensor? i find that modified this is the cheapest option tho
@netroy
4 жыл бұрын
this is some amazing work, thanks for doing this. 🙏 btw, is that "CC-RT-BLE" from an eQ-3 thermostat? have you tried reverse engineering those as well? they run on stm32l152, if I recall correctly.
@atc1441
4 жыл бұрын
Hey. Yes thats an eQ-3 they use some geko something chip cant remember. Never played with them as they are just to rare. Dont want to spent so much time on it if noone can/ or only some people can do something with it
@AkilaParakrama
3 ай бұрын
legend 💯
@kurcio
3 жыл бұрын
Hi man, awesome work. I just bought these recently and have been reading your repo! I just got a question, do you know if you power them with 5V? I don't want to keep changing my coin batteries and have a 5V plug pack that I want to utilise.
@atc1441
3 жыл бұрын
5v will kill them. You need to include a voltage regulator to 3.3v
@vantruongsinh
2 жыл бұрын
Hi Aaron, thanks so much for your effort to make this working. I would love if you can see if there is anyway to stop others to connect to the sensor as it is pretty easy to get connected and get the key.
@atc1441
2 жыл бұрын
Hey. See PVVX version of my firmware, he added pin functionality and much more. But be carefull right now there are new pcb revision which do not fully work. It is being worked on them
@vantruongsinh
2 жыл бұрын
@@atc1441 thanks so much for your quick response
@vantruongsinh
2 жыл бұрын
@@atc1441 unsure if there is any easy way to find out hardware revision number ? Might be open pcb inside the sensor?
@atc1441
2 жыл бұрын
On the box is a date written. That helps to get the version see here github.com/pvvx/ATC_MiThermometer/issues/125#issuecomment-937552241
@vantruongsinh
2 жыл бұрын
@@atc1441 thank you again. Appreciate your quality and dedicated work.
@MrHandsomejackuk
3 жыл бұрын
i got 3 of these running on tasmota the first 1 i used your bind key and it picked it up then i setup the 2nd sensor and that appeared after about 20 mins the 3rd sensor i didnt even put the bind key in to tasmota but after 30 mins it picked it up... i dont know how that works.. i didnt even flash your custom firmware, to any of them, they also gets the battery data too...
@user-wh5yl8gu9l
2 жыл бұрын
Friend. Could you help me please, I want to use it as an Am2301 sensor is it possible, and if it , can get the data line beside the 3v and ground lines to connect it ?
@VideocopterNZ
3 жыл бұрын
Hi Aaron, vielen Dank für die Mühe und Arbeit. Super gemacht. Eines leider will nicht so richtig gehen bei mir und das ist der Temperatur und Humidity offset. Was muss ich senden um einen -2 Grad offset zu schicken? Wenn ich FA02 oder FA+02 oder FA2 schicke passiert nichts, was mache ich falsch? Würde mich über deine Hilfe sehr freuen.
@hr35-x8g
3 жыл бұрын
Can i see real time temp data remotely, only over wifi through a gateway and without Bluetooth connection?? Thanks
@atc1441
3 жыл бұрын
Yes that sounds like the usecase.
@Banjoba
3 жыл бұрын
Thanks so much for your work. These are great. Although since I've flashed the new firmware, every couple of seconds the sensor displays humidity as 99% and battery low before reverting to normal humidity and no battery warning. Any idea?
@atc1441
3 жыл бұрын
Yes. That is how it should be, everytime you see the battery icon the percent of charge is shown in the humidity field. You can turn that feature of with the web flasher if you dont like it
@Banjoba
3 жыл бұрын
Thanks so much for the reply. I understand now!. I'll turn it off
@raduchristescu1097
2 жыл бұрын
Thank you so much Aaron, great work! I bought some devices and flashed them, all work like a charm they are all around my house. But there is something I am very concerned about. Anyone walking on the street near my house with a smartphone can connect to the sensors, put random correction values, or even worse, flash a malicious firmware. Is any way to prevent unwanted connection / flashing? Maybe a HW solution, like connecting TPx with TPy to make the device read only.
@atc1441
2 жыл бұрын
Hey. This is a valid concern, You could use PVVX version of the firmware that one includes the possibility to set a pin for connection
@arobaj5832
3 жыл бұрын
hi nice job but how can I restore history in MiHome after reverting to the original firmware? only the current measurement is displayed in the app, the history is not
@brois2956
2 жыл бұрын
Thanks to Aaron Christophel great job
@kamilsobolak3316
3 жыл бұрын
Is that sensor compatible with BLE Mesh? I wonder about range of suche sensor. How I should handle many sensors in hause? Should I use many ESP32 or there is even better solution?
@BillBostock
3 жыл бұрын
Excellent work! Thank you. Can you tell me what value I should use for a custom offset of -1 degree C? Is is just FA-01 ?
@atc1441
3 жыл бұрын
That should be 0xF4 but thats just out of my head right.
Пікірлер: 830