I made a slight mistake, Gaep appears to have nothing to do with OMV. I was using Gaep made the OMV press. I was wrong.
@albertbrogne9191
15 күн бұрын
Superbe finition avec la bobine roll
@theshotgunscientists
15 күн бұрын
Thanks
@Natedawg770
9 ай бұрын
Very cool! I started loading for ducks for next year already. Playing with some .410 3" #9 tss, so far they are lookin good.
@theshotgunscientists
9 ай бұрын
That’s awesome
@donaldatkinson7937
9 ай бұрын
I can appreciate you're enthusiasm for reloading. I'm getting older and mostly reload for hand guns, but seems like a job to me, but I do have enough 38sp and 357 for the coming apocalypse lol. Now starting on 45acp.
@theshotgunscientists
9 ай бұрын
Thanks man
@JoshMo1993
9 ай бұрын
Love your channel man. I'm deep into my Blackpowder journey and have grown to love the 12 gauge shotgun more so than anything else I've acquired over the years.
@theshotgunscientists
9 ай бұрын
I love black powder. I make my own.
@JoshMo1993
9 ай бұрын
@@theshotgunscientists as do I. It's such a versatile and handy skill set to have. Although I'm not sure how to get the sulfur smell out of my shop. I've been running an Ozone machine for days and the smell still persists lol.
@theshotgunscientists
9 ай бұрын
@@JoshMo1993 it’ll go away after a couple weeks or so
@JoshMo1993
9 ай бұрын
@@theshotgunscientists Hey man how do you clean your "spent" hulls? I'm searching through YT right now but I'd rather ask someone who knows what they are doing and someone I can trust. Thank you. Side note: ever thought of making a video of this?
@theshotgunscientists
9 ай бұрын
@@JoshMo1993 You don’t clean them, there’s no way to get them looking new again. For the metal part, just use some 0000 steel wool and it’ll polish it back to bright. The plastic will never look new again though.
@harleyironhead7090
9 ай бұрын
awesome reloading tools, great video
@theshotgunscientists
9 ай бұрын
Thanks
@crankygunreviews
9 ай бұрын
The Remington holes have loaded extremely well for me. Probably better than any others. Although I find after I reload for 10 shells once, they end up being too crispy or the pedals break apart and I can really only get one maybe two reloads out of them… Haven’t quite figured that out yet.
@theshotgunscientists
9 ай бұрын
Trim it down and keep loading
@piper3541
6 ай бұрын
Great channel. I only see roll crimp tools from OMV on BPI's website, not the fold crimp. Am I missing something?
@theshotgunscientists
6 ай бұрын
You want the pre crimp and ribbassator
@saltcreekammo
9 ай бұрын
Very cool... I need to get me a set for 16 gauge
@theshotgunscientists
9 ай бұрын
Apparently I’ve got a full set coming for the small bores, 24, 28, 32 gauges. Very thankful.
@johnnorman7708
9 ай бұрын
That 3/4 ounce load has to be a squirrel getter supreme. What is the usual velocity? I usually think of a .410 as a special purpose tool for squirrels and rabbits, so a good payload and tight pattern is what you can really use.
@theshotgunscientists
9 ай бұрын
About 1100 or 1050 fps. Using h110 you can get a little better speed.
@jpthebeast78
9 ай бұрын
Genius
@jamesfrangella8517
8 ай бұрын
Love your videos But it would be really Helpful if you put Links to referenced tools and suppliers !!! THANKS
@theshotgunscientists
8 ай бұрын
I can’t. KZitem does not allow that. Just google ballistic products you’ll find everything you need.
@bigdoug4068
3 ай бұрын
I am looking for a Crimp tool for 410 gauge shotgun would like to know where you got that one from
@theshotgunscientists
3 ай бұрын
Bpi
@bigdoug4068
3 ай бұрын
Where do you order the real crap from with love to order one for my 410
@theshotgunscientists
3 ай бұрын
Bpi
@nathancatlin3849
9 ай бұрын
So where can we buy these.
@theshotgunscientists
9 ай бұрын
Ballistic products
@ECACE72
8 ай бұрын
I've seen the OMV tools on BPI's site, but not with the black plastic or rubber piece to make it fit in the Load-All. Do you have any specifications or part number that was used to make that part of the tool?
@theshotgunscientists
8 ай бұрын
It’s a 4/5” expansion plug about 3/4” tall. It’s not meant to be used with the omv tools I’m probably 1 of 2 different people doing it this way.
@ECACE72
8 ай бұрын
@@theshotgunscientistsThat's perfect. Great idea!
@boltgun7266
6 ай бұрын
How well do the OMV tools work on new, never crimped hulls?
@theshotgunscientists
6 ай бұрын
I’ve done videos with them in 24, 28, .410, 32 and 10 gauge using new hulls. Better than any press by a lot. You can get factory style or better crimps.
@boltgun7266
6 ай бұрын
Great, thanks
@kdoggoutdoors
9 ай бұрын
Does it have to be the load all. Do you know if it would work on the mec jr 12 gauge press?
@theshotgunscientists
9 ай бұрын
They do yes but they can just be bolted on with the right screw
@user-ww7qz6vx9n
8 ай бұрын
Does the omv come with a way to size
@theshotgunscientists
8 ай бұрын
No idea
@cotheceo
6 ай бұрын
Link to this please
@theshotgunscientists
6 ай бұрын
I can’t, you’ll have to go to ballistic products website and find them sorry. Wish I could.
Пікірлер: 49